Integration Test Results

Test	Supported	Lab started	Devices configured	Validated	Test date	Device image
01-network		✅	✅	✅	2025-06-10 10:00:19	vrnetlab/juniper_vjunos-switch:23.4R2-S2.1
02-areas		✅	✅	✅	2025-06-10 10:02:43	vrnetlab/juniper_vjunos-switch:23.4R2-S2.1
03-cost		✅	✅	✅	2025-06-10 10:04:57	vrnetlab/juniper_vjunos-switch:23.4R2-S2.1
04-passive		✅	✅	✅	2025-06-10 10:07:22	vrnetlab/juniper_vjunos-switch:23.4R2-S2.1
05-unnumbered		✅	✅	✅	2025-06-10 10:09:36	vrnetlab/juniper_vjunos-switch:23.4R2-S2.1
06-lb-prefix		✅	✅	✅	2025-06-10 10:11:44	vrnetlab/juniper_vjunos-switch:23.4R2-S2.1
07-vlan-mtu		✅	✅	✅	2025-06-10 10:14:11	vrnetlab/juniper_vjunos-switch:23.4R2-S2.1
10-import	❌				2025-06-10 10:14:14
11-import-policy	❌				2025-06-10 10:14:15
20-default	❌				2025-06-10 10:14:15
21-default-policy	❌				2025-06-10 10:14:16
22-default-vrf	❌				2025-06-10 10:14:16
30-timers	❌				2025-06-10 10:14:17
31-priority	❌				2025-06-10 10:14:17
40-area-parameters		✅	✅	✅	2025-06-23 06:14:43	vrnetlab/juniper_vjunos-switch:23.4R2-S2.1

Notes:

Not supported: netlab does not support the function on the device (or the device cannot implement it)
Lab not started: usually a VM initialization failure or a VM boot timeout
Devices not configured: netlab initial failed, usually due to configuration templates Jinja2 errors or commands that the device refuses to accept
Not validated: netlab validate reported an error.
Click on the ✅ or ❌ marks to see log files or error reports
Hover over the test name to see a short description
Click on the Test Suite link to view a feature-specific overview of test results for all tested devices