Integration Test Results

Test	Supported	Lab started	Devices configured	Validated	Test date	Device image
01-network		✅	✅	✅	2025-05-06 23:44:19	dell/os10:5.6.6
02-areas		✅	✅	✅	2025-05-06 23:46:02	dell/os10:5.6.6
03-cost		✅	✅	✅	2025-05-06 23:47:47	dell/os10:5.6.6
04-passive		✅	✅	✅	2025-05-06 23:49:38	dell/os10:5.6.6
05-unnumbered		✅	✅	✅	2025-05-06 23:51:16	dell/os10:5.6.6
06-lb-prefix		✅	✅	❌ (more)	2025-05-06 23:52:55	dell/os10:5.6.6
Dell OS10 advertises IPv6 loopback prefixes with /64 prefix length (see RFC 5340, section 4.4.3.9)
07-vlan-mtu	❌				2025-05-06 23:52:59
10-import	❌				2025-05-06 23:53:00
11-import-policy	❌				2025-05-06 23:53:00
20-default		✅	✅	✔	2025-05-06 23:54:59	dell/os10:5.6.6
Node probe: There is no path to ::/0 in the OSPFv3 topology with cost=40 Node probe: There is no path to ::/0 in the OSPFv3 topology with cost=30
21-default-policy	❌				2025-05-06 23:55:05
22-default-vrf	❌				2025-05-06 23:55:05
30-timers	❌				2025-05-06 23:55:06
31-priority	❌				2025-05-06 23:55:06

Notes:

Not supported: netlab does not support the function on the device (or the device cannot implement it)
Lab not started: usually a VM initialization failure or a VM boot timeout
Devices not configured: netlab initial failed, usually due to configuration templates Jinja2 errors or commands that the device refuses to accept
Not validated: netlab validate reported an error.
Click on the ✅ or ❌ marks to see log files or error reports
Hover over the test name to see a short description
Click on the Test Suite link to view a feature-specific overview of test results for all tested devices