Integration Test Results

Test	Supported	Lab started	Devices configured	Validated	Test date	Device image
01-network		✅	✅	✅	2025-01-24 17:26:38
02-areas		✅	✅	✅	2025-01-24 17:27:56
03-cost		✅	✅	✅	2025-01-24 17:29:10
04-passive		✅	✅	✅	2025-01-24 17:30:39
05-unnumbered		✅	✅	✅	2025-01-24 17:31:53
06-lb-prefix		✅	✅	✅	2025-01-24 17:33:01
07-vlan-mtu		✅	✅	✅	2025-01-26 10:03:00
10-import		✅	✅	✅	2025-01-24 17:34:15
11-import-policy		✅	✅	✅	2025-01-24 17:35:32
20-default		✅	✅	✅	2025-01-24 17:36:54
21-default-policy		✅	✅	✅	2025-01-24 17:38:16
22-default-vrf		✅	✅	✅	2025-01-24 17:39:45
30-timers		✅	✅	✅	2025-01-24 17:40:50
31-priority		✅	✅	✅	2025-01-24 17:42:34
40-area-parameters	✔	✅	✅	✔	2025-06-23 06:52:54	cisco/iosvl2:2024
ospf: Cisco IOS cannot configure NSSA type-7 ranges Node rb: NSSA external route that should be summarized is advertised into backbone area Node rb: NSSA external route that should be suppressed is advertised into backbone area Node rb: NSSA type-7 routes are not summarized into type-5 LSA

Notes:

Not supported: netlab does not support the function on the device (or the device cannot implement it)
Lab not started: usually a VM initialization failure or a VM boot timeout
Devices not configured: netlab initial failed, usually due to configuration templates Jinja2 errors or commands that the device refuses to accept
Not validated: netlab validate reported an error.
Click on the ✅ or ❌ marks to see log files or error reports
Hover over the test name to see a short description
Click on the Test Suite link to view a feature-specific overview of test results for all tested devices