Integration Test Results

Test	Supported	Lab started	Devices configured	Validated	Test date	Device image
01-network		✅	✅	✅	2025-12-24 10:02:31	ceos:4.34.2F
02-areas		✅	✅	✅	2025-12-24 10:03:40	ceos:4.34.2F
03-cost		✅	✅	✅	2025-12-24 10:04:38	ceos:4.34.2F
04-passive		✅	✅	✅	2025-12-24 10:05:47	ceos:4.34.2F
05-unnumbered		✅	✅	✅	2025-12-24 10:06:40	ceos:4.34.2F
06-lb-prefix		✅	✅	❌ (more)	2025-12-24 10:07:38	ceos:4.34.2F
EOS advertises IPv6 loopback prefixes with /64 prefix length (see RFC 5340, section 4.4.3.9)
07-vlan-mtu		✅	✅	✅	2025-12-24 10:08:52	ceos:4.34.2F
10-import		✅	✅	✅	2025-12-24 10:09:53	ceos:4.34.2F
11-import-policy		✅	✅	✅	2025-12-24 10:10:54	ceos:4.34.2F
20-default		✅	✅	✅	2025-12-24 10:12:10	ceos:4.34.2F
21-default-policy		✅	✅	✅	2025-12-28 15:27:02	ceos:4.34.2F
22-default-vrf		✅	✅	✅	2025-12-28 13:18:25	ceos:4.34.2F
30-timers		✅	✅	✅	2025-12-24 10:16:01	ceos:4.34.2F
31-priority		✅	✅	✅	2025-12-24 10:17:29	ceos:4.34.2F
40-area-parameters	✔	✅	✅	✔	2025-12-24 10:19:12	ceos:4.34.2F
ospf: Arista EOS cannot configure NSSA type-7 ranges ospf: Arista EOS cannot suppress NSSA type-7 ranges Node rb: NSSA external route that should be summarized is advertised into backbone area Node rb: NSSA external route that should be suppressed is advertised into backbone area Node rb: NSSA type-7 routes are not summarized into type-5 LSA

Notes:

Not supported: netlab does not support the function on the device (or the device cannot implement it)
Lab not started: usually a VM initialization failure or a VM boot timeout
Devices not configured: netlab initial failed, usually due to configuration templates Jinja2 errors or commands that the device refuses to accept
Not validated: netlab validate reported an error.
Click on the ✅ or ❌ marks to see log files or error reports
Hover over the test name to see a short description
Click on the Test Suite link to view a feature-specific overview of test results for all tested devices