Integration Test Results

Test	Supported	Lab started	Devices configured	Validated	Test date	Device image
01-network		✅	✅	✅	2025-12-25 04:35:40	cisco/csr1000v:17.03.04
02-areas		✅	✅	✅	2025-12-25 04:37:56	cisco/csr1000v:17.03.04
03-cost		✅	✅	✅	2025-12-25 04:40:06	cisco/csr1000v:17.03.04
04-passive		✅	✅	✅	2025-12-25 04:42:27	cisco/csr1000v:17.03.04
05-unnumbered		✅	✅	✅	2025-12-25 04:44:32	cisco/csr1000v:17.03.04
06-lb-prefix		✅	✅	✅	2025-12-25 04:46:36	cisco/csr1000v:17.03.04
07-vlan-mtu		✅	✅	✅	2025-12-25 04:48:55	cisco/csr1000v:17.03.04
10-import		✅	✅	✅	2025-12-25 04:51:05	cisco/csr1000v:17.03.04
11-import-policy		✅	✅	✅	2025-12-25 04:53:17	cisco/csr1000v:17.03.04
20-default		✅	✅	✅	2025-12-25 04:55:42	cisco/csr1000v:17.03.04
21-default-policy		✅	✅	✅	2025-12-28 15:24:11	cisco/csr1000v:17.03.04
22-default-vrf		✅	✅	✅	2025-12-28 13:13:43	cisco/csr1000v:17.03.04
30-timers		✅	✅	✅	2025-12-25 05:03:02	cisco/csr1000v:17.03.04
31-priority		✅	✅	✅	2025-12-25 05:05:43	cisco/csr1000v:17.03.04
40-area-parameters	✔	✅	✅	❌ (more)	2025-12-25 05:08:55	cisco/csr1000v:17.03.04
ospf: Cisco IOS cannot configure NSSA type-7 ranges ospf: Cisco IOS cannot suppress NSSA type-7 ranges

Notes:

Not supported: netlab does not support the function on the device (or the device cannot implement it)
Lab not started: usually a VM initialization failure or a VM boot timeout
Devices not configured: netlab initial failed, usually due to configuration templates Jinja2 errors or commands that the device refuses to accept
Not validated: netlab validate reported an error.
Click on the ✅ or ❌ marks to see log files or error reports
Hover over the test name to see a short description
Click on the Test Suite link to view a feature-specific overview of test results for all tested devices