Integration Test Results

Test	Supported	Lab started	Devices configured	Validated	Test date	Device image
01-network		✅	✅	✅	2025-12-24 21:50:35	cisco/cat8000v:17.13.01
02-areas		✅	✅	✅	2025-12-24 21:52:52	cisco/cat8000v:17.13.01
03-cost		✅	✅	✅	2025-12-24 21:55:02	cisco/cat8000v:17.13.01
04-passive		✅	✅	✅	2025-12-24 21:57:23	cisco/cat8000v:17.13.01
05-unnumbered		✅	✅	✅	2025-12-24 21:59:29	cisco/cat8000v:17.13.01
06-lb-prefix		✅	✅	✅	2025-12-24 22:01:33	cisco/cat8000v:17.13.01
07-vlan-mtu		✅	✅	✅	2025-12-24 22:03:51	cisco/cat8000v:17.13.01
10-import		✅	✅	✅	2025-12-24 22:06:03	cisco/cat8000v:17.13.01
11-import-policy		✅	✅	✅	2025-12-24 22:08:17	cisco/cat8000v:17.13.01
20-default		✅	✅	✅	2025-12-24 22:10:43	cisco/cat8000v:17.13.01
21-default-policy		✅	✅	❌ (more)	2025-12-24 22:13:10	cisco/cat8000v:17.13.01
22-default-vrf		✅	✅	✅	2025-12-28 13:08:52	cisco/cat8000v:17.13.01
30-timers		✅	✅	✅	2025-12-24 22:18:05	cisco/cat8000v:17.13.01
31-priority		✅	✅	✅	2025-12-24 22:20:43	cisco/cat8000v:17.13.01
40-area-parameters	✔	✅	✅	❌ (more)	2025-12-24 22:23:55	cisco/cat8000v:17.13.01
ospf: Cisco IOS cannot configure NSSA type-7 ranges ospf: Cisco IOS cannot suppress NSSA type-7 ranges

Notes:

Not supported: netlab does not support the function on the device (or the device cannot implement it)
Lab not started: usually a VM initialization failure or a VM boot timeout
Devices not configured: netlab initial failed, usually due to configuration templates Jinja2 errors or commands that the device refuses to accept
Not validated: netlab validate reported an error.
Click on the ✅ or ❌ marks to see log files or error reports
Hover over the test name to see a short description
Click on the Test Suite link to view a feature-specific overview of test results for all tested devices