Integration Test Results

Device arubacx
Provider libvirt
Test suite ospf/ospfv3
Test Supported Lab
started		 Devices
configured		 Validated Test date Device
image
01-network ✅ ✅ ✅ 2025-07-10 06:16:00 aruba/cx:10.15
02-areas ✅ ✅ ✅ 2025-07-10 06:17:08 aruba/cx:10.15
03-cost ✅ ✅ ✅ 2025-07-10 06:18:13 aruba/cx:10.15
04-passive ✅ ✅ ✅ 2025-07-10 06:19:28 aruba/cx:10.15
05-unnumbered ✅ ✅ ✅ 2025-07-10 06:20:26 aruba/cx:10.15
06-lb-prefix ✅ ✅ ✅ 2025-07-10 06:21:24 aruba/cx:10.15
07-vlan-mtu ✅ ✅ ✅ 2025-07-10 06:22:33 aruba/cx:10.15
10-import ✅ ✅ ✅ 2025-07-10 06:23:40 aruba/cx:10.15
11-import-policy ✅ ✅ ✅ 2025-07-10 06:24:47 aruba/cx:10.15
20-default ✔ ✅ ✅ ✔ 2025-07-10 06:25:58 aruba/cx:10.15
  • Aruba CX cannot specify the OSPF external route type on the default route. All default routes are advertised as E2 routes.
  • arubacx: OSPF default-information originate (used in global routing table on node dut_a) does not support metric-type attribute
  • arubacx: OSPF default-information originate (used in global routing table on node dut_c) does not support metric-type attribute
  • Node probe: There is no path to ::/0 in the OSPFv3 topology with cost=30
21-default-policy ❌ 2025-07-10 06:26:05
22-default-vrf ✅ ✅ ✅ 2025-07-10 06:27:14 aruba/cx:10.15
30-timers ✅ ✅ ✅ 2025-07-10 06:28:07 aruba/cx:10.15
31-priority ✅ ✅ ✅ 2025-07-10 06:29:33 aruba/cx:10.15
40-area-parameters ✅ ✅ ✔ 2025-07-10 06:30:58 aruba/cx:10.15
Node rb: Inter-area routes do not have the correct cost

Notes: