[r2_disconnect] Disable R2 link on client LAN [ node(s): br_a ]
[INFO]          Executing configuration snippet linkdown with neighbor=r2 ifstate=down
[PASS]          R2 link has been disabled on client LAN

[vrrp_wait_1]   Wait for VRRP on DUT to take over
[WAITING]       Waiting for 5 seconds, 2 seconds left

[ping_vrrp_v4]  Verify VRRP for IPv4 is enabled on DUT [ node(s): h1 ]
[PASS]          h1: Ping to ipv4 h2 (172.16.44.4) succeeded
[PASS]          Test succeeded in 0.1 seconds

[ping_vrrp_v6]  Verify VRRP for IPv6 is enabled on DUT [ node(s): h1 ]
[PASS]          h1: Ping to ipv6 h2 succeeded
[PASS]          Test succeeded in 0.1 seconds

[r2_reconnect]  Reconnect R2 to the client LAN [ node(s): br_a ]
[INFO]          Executing configuration snippet linkdown with neighbor=r2 ifstate=up
[PASS]          R2 has been reconnected to client LAN

[vrrp_wait_2]   Wait for VRRP state to settle
[WAITING]       Waiting for 5 seconds, 3 seconds left

[r2_v4_backup]  Verify that R2 is in the backup state for IPv4 [ node(s): r2 ]
[WARNING]       Node r2: Test failed for node r2
Returned result
================================================================================
- vrid: 217
  version: 3
  autoconfigured: false
  shutdown: false
  preemptMode: true
  acceptMode: true
  checksumWithIpv4Pseudoheader: false
  interface: eth2
  advertisementInterval: 1000
  priority: 20
  v4:
    interface: vrrp-2-217
    vmac: 00:00:5e:00:01:d9
    primaryAddress: 172.16.33.2
    status: Master
    effectivePriority: 20
    masterAdverInterval: 1000
    skewTime: 920
    masterDownInterval: 3920
    stats:
      adverTx: 13
      adverRx: 0
      garpTx: 1
      transitions: 2
    addresses:
    - 172.16.33.42
  v6:
    interface: vrrp6-2-217
    vmac: 00:00:5e:00:02:d9
    primaryAddress: fe80::bce7:ef89:4168:4a37
    status: Master
    effectivePriority: 20
    masterAdverInterval: 1000
    skewTime: 920
    masterDownInterval: 3920
    stats:
      adverTx: 13
      adverRx: 2
      neighborAdverTx: 2
      transitions: 2
    addresses:
    - fe80::200:5eff:fe00:2d9
    - 2001:db8:cafe:33::2a


[r2_v6_backup]  Verify that R2 is in the backup state for IPv6 [ node(s): r2 ]
[FAIL]          Node r2: Test failed for node r2
Returned result
================================================================================
- vrid: 217
  version: 3
  autoconfigured: false
  shutdown: false
  preemptMode: true
  acceptMode: true
  checksumWithIpv4Pseudoheader: false
  interface: eth2
  advertisementInterval: 1000
  priority: 20
  v4:
    interface: vrrp-2-217
    vmac: 00:00:5e:00:01:d9
    primaryAddress: 172.16.33.2
    status: Master
    effectivePriority: 20
    masterAdverInterval: 1000
    skewTime: 920
    masterDownInterval: 3920
    stats:
      adverTx: 23
      adverRx: 0
      garpTx: 1
      transitions: 2
    addresses:
    - 172.16.33.42
  v6:
    interface: vrrp6-2-217
    vmac: 00:00:5e:00:02:d9
    primaryAddress: fe80::bce7:ef89:4168:4a37
    status: Master
    effectivePriority: 20
    masterAdverInterval: 1000
    skewTime: 920
    masterDownInterval: 3920
    stats:
      adverTx: 23
      adverRx: 2
      neighborAdverTx: 2
      transitions: 2
    addresses:
    - fe80::200:5eff:fe00:2d9
    - 2001:db8:cafe:33::2a


[r2_prio_high]  Starting test [ node(s): r2 ]
[INFO]          Executing configuration snippet vrrp-priority with vrrp_prio=80
[PASS]          R2 VRRP priority has been increased to 80

[r2_v4_master]  Verify that R2 took over as master on IPv4 (VRRP priority on DUT is lower than 80) [ node(s): r2 ]
[PASS]          Validation succeeded on r2
[PASS]          Test succeeded in 0.0 seconds

[r2_v6_master]  Verify that R2 took over as master on IPv6 (VRRP priority on DUT is lower than 80) [ node(s): r2 ]
[PASS]          Validation succeeded on r2
[PASS]          Test succeeded in 3.5 seconds

[r2_prio_low]   Starting test [ node(s): r2 ]
[INFO]          Executing configuration snippet vrrp-priority with vrrp_prio=20
[PASS]          R2 VRRP priority has been lowered to 20

[preempt_v4]    Verify that DUT preempts R2 when its priority is lowered [ node(s): r2 ]
[WARNING]       Node r2: Test failed for node r2
Returned result
================================================================================
- vrid: 217
  version: 3
  autoconfigured: false
  shutdown: false
  preemptMode: true
  acceptMode: true
  checksumWithIpv4Pseudoheader: false
  interface: eth2
  advertisementInterval: 1000
  priority: 20
  v4:
    interface: vrrp-2-217
    vmac: 00:00:5e:00:01:d9
    primaryAddress: 172.16.33.2
    status: Master
    effectivePriority: 20
    masterAdverInterval: 1000
    skewTime: 920
    masterDownInterval: 3920
    stats:
      adverTx: 41
      adverRx: 0
      garpTx: 1
      transitions: 2
    addresses:
    - 172.16.33.42
  v6:
    interface: vrrp6-2-217
    vmac: 00:00:5e:00:02:d9
    primaryAddress: fe80::bce7:ef89:4168:4a37
    status: Master
    effectivePriority: 20
    masterAdverInterval: 1000
    skewTime: 920
    masterDownInterval: 3920
    stats:
      adverTx: 37
      adverRx: 8
      neighborAdverTx: 4
      transitions: 4
    addresses:
    - fe80::200:5eff:fe00:2d9
    - 2001:db8:cafe:33::2a


[preempt_v6]    Verify that DUT preempts R2 when its priority is lowered [ node(s): r2 ]
[PASS]          Validation succeeded on r2
[PASS]          Test succeeded in 2.5 seconds

[FAIL]          12 tests completed, one test failed