[INFO] Checking for updates in configuration templates
 [INFO] Creating configuration snippets
[CREATED] h1: initial,routing
[CREATED] h2: initial,routing
[CREATED] h3: initial,routing
[CREATED] h4: initial,routing
[CREATED] s1: initial,vlan,ospf,bgp,vxlan,evpn
[CREATED] s2: initial,vlan,ospf,bgp,vxlan,evpn
 [INFO] Executing initial configuration for node h1 (namespace clab-
          ml_17-h1)
 [INFO] Executing routing configuration for node h1 (namespace clab-
          ml_17-h1)
 [INFO] Executing initial configuration for node h2 (namespace clab-
          ml_17-h2)
 [INFO] Executing routing configuration for node h2 (namespace clab-
          ml_17-h2)
 [INFO] Executing initial configuration for node h3 (namespace clab-
          ml_17-h3)
 [INFO] Executing routing configuration for node h3 (namespace clab-
          ml_17-h3)
 [INFO] Executing initial configuration for node h4 (namespace clab-
          ml_17-h4)
 [INFO] Executing routing configuration for node h4 (namespace clab-
          ml_17-h4)

 [INFO] Starting Ansible playbook to deploy the rest of the
          configurations
[WARNING]: Found variable using reserved name: hosts

PLAY [Deploy initial device configuration] *************************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [s1]
ok: [s2]

TASK [Generic readiness tests] *************************************************
skipping: [s1]
skipping: [s2]

TASK [Find device readiness script] ********************************************
ok: [s1]
ok: [s2]

TASK [Wait for device to become ready] *****************************************
skipping: [s1]
skipping: [s2]

TASK [Normalize config on bridge-like devices] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1, s2

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [s1]
ok: [s2]

TASK [Find configuration template for normalize] *******************************
ok: [s1]
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s1]
skipping: [s2]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [s1]
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [s1]
skipping: [s2]

TASK [Deploy normalize configuration] ******************************************
skipping: [s1]
skipping: [s2]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1, s2

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [s1]
ok: [s2]

TASK [Find configuration template for initial] *********************************
ok: [s1]
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s1]
skipping: [s2]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [s1]
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s1] => {
    "msg": "initial configuration for s1\n=========================================\n#!/bin/vbash\nsource /opt/vyatta/etc/functions/script-template\n\nif [ \"$(id -g -n)\" != 'vyattacfg' ] ; then\n    exec sg vyattacfg -c \"/bin/vbash $(readlink -f $0) $@\"\nfi\n\n# Configuration items start here\n\nconfigure\nset system host-name 's1'\n\n\nset interfaces bridge br0 description 'Global Switch Bridge'\nset interfaces bridge br0 enable-vlan\n\nset interfaces bridge br0 vif 1000\nset interfaces bridge br0 vif 1001\n\nset interfaces dummy dum0 address 10.0.0.5/32\n\n\n\nset interfaces ethernet eth1 description 's1 -> s2'\n\nset interfaces ethernet eth1 mtu 1600\n\nset interfaces ethernet eth1 address 10.1.0.1/30\n\n\n\n\n\nset interfaces ethernet eth2 description '[Access VLAN red] s1 -> h1'\n\n\n\n\n\n\n\nset interfaces ethernet eth3 description '[Access VLAN blue] s1 -> h3'\n\n\n\n\n\n\n\nset interfaces bridge br0 vif 1000 description 'VLAN red (1000) -> [h1,h2,s2]'\n\n\n\n\n\n\n\nset interfaces bridge br0 vif 1001 description 'VLAN blue (1001) -> [h3,h4,s2]'\n\n\n\n\n\n\nset service lldp interface all\n>/dev/null 2>/dev/null set service lldp interface eth0 disable\n>/dev/null 2>/dev/null set service lldp interface eth0 mode disable\n\n\n\n# Commit, save and exit from subshell\n\ncommit\nsave\nexit\n\n# Restart FRR to pick up the new hostname\nsudo service frr restart\n"
}
ok: [s2] => {
    "msg": "initial configuration for s2\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=1\nsysctl -w net.ipv6.conf.all.forwarding=0\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.disable_ipv6=1\nip link set dev eth1 mtu 1600\nip link set eth1 up\nip link set eth2 down\nsysctl -qw net.ipv6.conf.eth2.disable_ipv6=1\nip link set dev eth2 mtu 1500\nip link set eth2 up\nip link set eth3 down\nsysctl -qw net.ipv6.conf.eth3.disable_ipv6=1\nip link set dev eth3 mtu 1500\nip link set eth3 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname s2\n!\nlog file /tmp/logging\n\n!\nip forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ip address 10.0.0.6/32\n!\ninterface eth1\n no shutdown\n description s2 -> s1\n ip address 10.1.0.2/30\n!\ninterface eth2\n no shutdown\n description [Access VLAN red] s2 -> h2\n ! no ip address\n!\ninterface eth3\n no shutdown\n description [Access VLAN blue] s2 -> h4\n ! no ip address\n!\ninterface vlan1000\n no shutdown\n description VLAN red (1000) -> [h1,s1,h2]\n ! no ip address\n!\ninterface vlan1001\n no shutdown\n description VLAN blue (1001) -> [h3,s1,h4]\n ! no ip address\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/vyos.yml for s1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for s2

TASK [set_fact] ****************************************************************
ok: [s1]

TASK [template] ****************************************************************
changed: [s1]

TASK [execute config-initial.sh to deploy initial config from /work/netlab_cicd/node_files/s1/initial] ***
changed: [s1]

TASK [Attempt to load VRF kernel module] ***************************************
changed: [s2 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [s2]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for s2

TASK [template] ****************************************************************
changed: [s2]

TASK [set_fact] ****************************************************************
ok: [s2]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/node_files/s2/initial] ***
changed: [s2]

TASK [run vtysh to import initial config from /work/netlab_cicd/node_files/s2/initial] ***
skipping: [s2]

PLAY [Deploy module-specific configurations] ***********************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [s1]
ok: [s2]

TASK [Deploy individual configuration modules] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1, s2 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1, s2 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1, s2 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1, s2 => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1, s2 => (item=vxlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1, s2 => (item=evpn)

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [s1]
ok: [s2]

TASK [Find configuration template for vlan] ************************************
ok: [s1]
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s1]
skipping: [s2]

TASK [Find configuration deployment deploy_script for vlan] ********************
ok: [s1]
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s1] => {
    "msg": "vlan configuration for s1\n=========================================\n#!/bin/vbash\nsource /opt/vyatta/etc/functions/script-template\n\nif [ \"$(id -g -n)\" != 'vyattacfg' ] ; then\n    exec sg vyattacfg -c \"/bin/vbash $(readlink -f $0) $@\"\nfi\n\n# Configuration items start here\nconfigure\n\nset interfaces bridge br0 member interface eth2 native-vlan 1000\nset interfaces bridge br0 member interface eth3 native-vlan 1001\n\n# Commit, save and exit from subshell\n\ncommit\nsave\nexit\n"
}
ok: [s2] => {
    "msg": "vlan configuration for s2\n=========================================\n#!/bin/bash\n#\nset -e # Exit immediately when any command fails\n#\nif [ ! -e /sys/devices/virtual/net/vlan1000 ]; then\n  ip link add vlan1000 type bridge\n  ip link set dev vlan1000 address ca:f4:00:06:00:00\n\n  ip addr flush dev vlan1000\nfi\nif [ ! -e /sys/devices/virtual/net/vlan1001 ]; then\n  ip link add vlan1001 type bridge\n  ip link set dev vlan1001 address ca:f4:00:06:00:01\n\n  ip addr flush dev vlan1001\nfi\n\nip link set dev eth2 master vlan1000\nip link set dev eth3 master vlan1001\n\nip link set dev vlan1000 up\nip link set dev vlan1001 up\n"
}

TASK [Deploy vlan configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/vyos.yml for s1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for s2

TASK [set_fact] ****************************************************************
ok: [s1]

TASK [template] ****************************************************************
changed: [s1]

TASK [execute config-vlan.sh to deploy vlan config from /work/netlab_cicd/node_files/s1/vlan] ***
changed: [s1]

TASK [template] ****************************************************************
changed: [s2]

TASK [set_fact] ****************************************************************
ok: [s2]

TASK [run /tmp/config.sh to deploy vlan config from /work/netlab_cicd/node_files/s2/vlan] ***
changed: [s2]

TASK [run vtysh to import vlan config from /work/netlab_cicd/node_files/s2/vlan] ***
skipping: [s2]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [s1]
ok: [s2]

TASK [Find configuration template for routing] *********************************
skipping: [s1]
skipping: [s2]

TASK [fail] ********************************************************************
skipping: [s1]
skipping: [s2]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [s1]
skipping: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [s1]
skipping: [s2]

TASK [Deploy routing configuration] ********************************************
skipping: [s1]
skipping: [s2]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [s1]
ok: [s2]

TASK [Find configuration template for ospf] ************************************
ok: [s1]
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s1]
skipping: [s2]

TASK [Find configuration deployment deploy_script for ospf] ********************
ok: [s1]
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s1] => {
    "msg": "ospf configuration for s1\n=========================================\n#!/bin/vbash\nsource /opt/vyatta/etc/functions/script-template\n\nif [ \"$(id -g -n)\" != 'vyattacfg' ] ; then\n    exec sg vyattacfg -c \"/bin/vbash $(readlink -f $0) $@\"\nfi\n\n# Configuration items start here\n\nconfigure\n\n\nset protocols ospf parameters router-id 10.0.0.5\n\n\n\n\nset protocols ospf interface dum0 passive\nset protocols ospf interface dum0 area 0.0.0.0\n\n\nset protocols ospf interface eth1 area 0.0.0.0\n\nset protocols ospf interface eth1 network point-to-point\n\n\n\ncommit\nsave\nexit\n"
}
ok: [s2] => {
    "msg": "ospf configuration for s2\n=========================================\n!\n! OSPFv2 FRR configuration\n!\nrouter ospf\n ospf router-id 10.0.0.6\n timers throttle spf 10 50 500\n timers throttle lsa all 100\n timers lsa min-arrival 100\n\n\nexit\n!\ninterface lo\n! \n ip ospf area 0.0.0.0\n!\ninterface eth1\n! s2 -> s1\n ip ospf area 0.0.0.0\n ip ospf network point-to-point\n!\n\n!\ndo write\n"
}

TASK [Deploy ospf configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/vyos.yml for s1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for s2

TASK [set_fact] ****************************************************************
ok: [s1]

TASK [template] ****************************************************************
changed: [s1]

TASK [execute config-ospf.sh to deploy ospf config from /work/netlab_cicd/node_files/s1/ospf] ***
changed: [s1]

TASK [template] ****************************************************************
changed: [s2]

TASK [set_fact] ****************************************************************
ok: [s2]

TASK [run /tmp/config.sh to deploy ospf config from /work/netlab_cicd/node_files/s2/ospf] ***
skipping: [s2]

TASK [run vtysh to import ospf config from /work/netlab_cicd/node_files/s2/ospf] ***
changed: [s2]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [s1]
ok: [s2]

TASK [Find configuration template for bgp] *************************************
ok: [s1]
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s1]
skipping: [s2]

TASK [Find configuration deployment deploy_script for bgp] *********************
ok: [s1]
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s1] => {
    "msg": "bgp configuration for s1\n=========================================\n\nset protocols bgp system-as 65000\n\nset protocols bgp parameters router-id 10.0.0.5\n\n\n\nset protocols bgp neighbor 10.0.0.6 remote-as 65000\nset protocols bgp neighbor 10.0.0.6 description 's2'\n \nset protocols bgp neighbor 10.0.0.6 update-source dum0\n\n\n\n\n# Work on Family ipv4\n\n\nset protocols bgp address-family ipv4-unicast network 10.0.0.5/32\n\n\n\n\n\nset protocols bgp neighbor 10.0.0.6 address-family ipv4-unicast soft-reconfiguration inbound\n\nset protocols bgp neighbor 10.0.0.6 address-family ipv4-unicast nexthop-self\n\n\n\n\n"
}
ok: [s2] => {
    "msg": "bgp configuration for s2\n=========================================\n!\nrouter bgp 65000\n  no bgp ebgp-requires-policy\n  no bgp default ipv4-unicast\n  bgp default show-hostname\n  bgp default show-nexthop-hostname\n  ! Consider AS paths of same length but with different AS as ECMP candidates\n  bgp bestpath as-path multipath-relax\n\n  bgp router-id 10.0.0.6\n!\n  neighbor 10.0.0.5 remote-as 65000\n  neighbor 10.0.0.5 description s1\n  neighbor 10.0.0.5 update-source lo\n!\n address-family ipv4 unicast\n!\n\n!\n! Originate networks from connected subnets\n!\n  network 10.0.0.6/32\n!\n  neighbor 10.0.0.5 activate\n  neighbor 10.0.0.5 next-hop-self\n  no neighbor 10.0.0.5 send-community all\n  neighbor 10.0.0.5 send-community standard\n  neighbor 10.0.0.5 send-community large\n  neighbor 10.0.0.5 send-community extended\n!\n!\n!\ndo write\n"
}

TASK [Deploy bgp configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/vyos.yml for s1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for s2

TASK [set_fact] ****************************************************************
ok: [s1]

TASK [template] ****************************************************************
changed: [s1]

TASK [execute config-bgp.sh to deploy bgp config from /work/netlab_cicd/node_files/s1/bgp] ***
changed: [s1]

TASK [template] ****************************************************************
changed: [s2]

TASK [set_fact] ****************************************************************
ok: [s2]

TASK [run /tmp/config.sh to deploy bgp config from /work/netlab_cicd/node_files/s2/bgp] ***
skipping: [s2]

TASK [run vtysh to import bgp config from /work/netlab_cicd/node_files/s2/bgp] ***
changed: [s2]

TASK [Figure out whether to deploy the module vxlan on current device] *********
ok: [s1]
ok: [s2]

TASK [Find configuration template for vxlan] ***********************************
ok: [s1]
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s1]
skipping: [s2]

TASK [Find configuration deployment deploy_script for vxlan] *******************
ok: [s1]
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s1] => {
    "msg": "vxlan configuration for s1\n=========================================\n#!/bin/vbash\nsource /opt/vyatta/etc/functions/script-template\n\nif [ \"$(id -g -n)\" != 'vyattacfg' ] ; then\n    exec sg vyattacfg -c \"/bin/vbash $(readlink -f $0) $@\"\nfi\n\n# Configuration items start here\nconfigure\n\n\n# Create VXLAN interface\nset interfaces vxlan vxlan1000 vni 1000\nset interfaces vxlan vxlan1000 source-address 10.0.0.5\n# And set UDP port to 4789\nset interfaces vxlan vxlan1000 port 4789\n\n# Add it to the global bridge\n## NOTE: in the future we may want to switch to one-bridge-per-vni\n##   (still to understand if single bridge can work with EVPN controlled VXLAN)\nset interfaces bridge br0 member interface vxlan1000 native-vlan 1000\n\n# Add VTEP Flood list\n\n# If flooding is based on EVPN, set 'parameters nolearning'\nset interfaces vxlan vxlan1000 parameters nolearning\n\n\n# Create VXLAN interface\nset interfaces vxlan vxlan1001 vni 1001\nset interfaces vxlan vxlan1001 source-address 10.0.0.5\n# And set UDP port to 4789\nset interfaces vxlan vxlan1001 port 4789\n\n# Add it to the global bridge\n## NOTE: in the future we may want to switch to one-bridge-per-vni\n##   (still to understand if single bridge can work with EVPN controlled VXLAN)\nset interfaces bridge br0 member interface vxlan1001 native-vlan 1001\n\n# Add VTEP Flood list\n\n# If flooding is based on EVPN, set 'parameters nolearning'\nset interfaces vxlan vxlan1001 parameters nolearning\n\n\n# Commit, save and exit from subshell\n\ncommit\nsave\nexit\n"
}
ok: [s2] => {
    "msg": "vxlan configuration for s2\n=========================================\n#!/bin/bash\n#\nset -e # Exit immediately when any command fails\n#\n\n\n\n# Create L3 VNIs with bridges and add to correct vrf table\n\n# Create VXLAN L2 interface per vni\nip link add vxlan1000 type vxlan \\\n  id 1000 \\\n  dstport 4789 \\\n  local 10.0.0.6 nolearning\n#\n# Add it to the VLAN bridge (create if needed for l3 vnis); disable STP\nif [ ! -e /sys/devices/virtual/net/vlan1000 ]; then\nip link add vlan1000 type bridge\nip link set up dev vlan1000\nfi\nip link set dev vxlan1000 master vlan1000\nip link set vlan1000 type bridge stp_state 0\n\n# Do not generate ipv6 link-local address for VXLAN devices\nip link set mtu 1500 addrgenmode none dev vxlan1000\n# Disable dynamic MAC learning for evpn, see https://docs.frrouting.org/en/latest/evpn.html\nbridge link set dev vxlan1000 learning off\nip link set up dev vxlan1000\n\n# Create VXLAN L2 interface per vni\nip link add vxlan1001 type vxlan \\\n  id 1001 \\\n  dstport 4789 \\\n  local 10.0.0.6 nolearning\n#\n# Add it to the VLAN bridge (create if needed for l3 vnis); disable STP\nif [ ! -e /sys/devices/virtual/net/vlan1001 ]; then\nip link add vlan1001 type bridge\nip link set up dev vlan1001\nfi\nip link set dev vxlan1001 master vlan1001\nip link set vlan1001 type bridge stp_state 0\n\n# Do not generate ipv6 link-local address for VXLAN devices\nip link set mtu 1500 addrgenmode none dev vxlan1001\n# Disable dynamic MAC learning for evpn, see https://docs.frrouting.org/en/latest/evpn.html\nbridge link set dev vxlan1001 learning off\nip link set up dev vxlan1001\n\n\nexit $?\n"
}

TASK [Deploy vxlan configuration] **********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/vyos.yml for s1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for s2

TASK [set_fact] ****************************************************************
ok: [s1]

TASK [template] ****************************************************************
changed: [s1]

TASK [execute config-vxlan.sh to deploy vxlan config from /work/netlab_cicd/node_files/s1/vxlan] ***
changed: [s1]

TASK [template] ****************************************************************
changed: [s2]

TASK [set_fact] ****************************************************************
ok: [s2]

TASK [run /tmp/config.sh to deploy vxlan config from /work/netlab_cicd/node_files/s2/vxlan] ***
changed: [s2]

TASK [run vtysh to import vxlan config from /work/netlab_cicd/node_files/s2/vxlan] ***
skipping: [s2]

TASK [Figure out whether to deploy the module evpn on current device] **********
ok: [s1]
ok: [s2]

TASK [Find configuration template for evpn] ************************************
ok: [s1]
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s1]
skipping: [s2]

TASK [Find configuration deployment deploy_script for evpn] ********************
ok: [s1]
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s1] => {
    "msg": "evpn configuration for s1\n=========================================\n#!/bin/vbash\nsource /opt/vyatta/etc/functions/script-template\n\nif [ \"$(id -g -n)\" != 'vyattacfg' ] ; then\n    exec sg vyattacfg -c \"/bin/vbash $(readlink -f $0) $@\"\nfi\n\n# Configuration items start here\nconfigure\n\n# Configure Generic EVPN Stuff\nset protocols bgp address-family l2vpn-evpn advertise-svi-ip\nset protocols bgp address-family l2vpn-evpn advertise-all-vni\n\nset protocols bgp neighbor 10.0.0.6 address-family l2vpn-evpn nexthop-self\nset protocols bgp neighbor 10.0.0.6 address-family l2vpn-evpn soft-reconfiguration inbound\n\n\n# Configure VNI params\nset protocols bgp address-family l2vpn-evpn vni 1000 rd 10.0.0.5:1000\nset protocols bgp address-family l2vpn-evpn vni 1000 route-target import \"65000:1000\"\nset protocols bgp address-family l2vpn-evpn vni 1000 route-target export \"65000:1000\"\nset protocols bgp address-family l2vpn-evpn vni 1001 rd 10.0.0.5:1001\nset protocols bgp address-family l2vpn-evpn vni 1001 route-target import \"65000:1001\"\nset protocols bgp address-family l2vpn-evpn vni 1001 route-target export \"65000:1001\"\n\n# Work on L3VNI\n\n\n# Commit, save and exit from subshell\n\ncommit\nsave\nexit\n"
}
ok: [s2] => {
    "msg": "evpn configuration for s2\n=========================================\n#!/bin/bash\n#\nset -e\ncat >/tmp/evpn_config <<CONFIG\nrouter bgp 65000\n address-family l2vpn evpn\n  advertise-all-vni\n  advertise-svi-ip\n  advertise ipv4 unicast\n\n! Configure explicit Route Targets and RD per L2 VNI; auto-derived differs\n  vni 1000\n   rd 10.0.0.6:1000\n   route-target import 65000:1000\n   route-target export 65000:1000\n  exit-vni\n  vni 1001\n   rd 10.0.0.6:1001\n   route-target import 65000:1001\n   route-target export 65000:1001\n  exit-vni\n\n  neighbor 10.0.0.5 activate\n\n exit-address-family\n!\n \nexit\n\n! L3 VRF EVPN handling\n!\ndo write\nCONFIG\nvtysh -f /tmp/evpn_config\nvtysh -c 'clear bgp *'\n"
}

TASK [Deploy evpn configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/vyos.yml for s1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for s2

TASK [set_fact] ****************************************************************
ok: [s1]

TASK [template] ****************************************************************
changed: [s1]

TASK [execute config-evpn.sh to deploy evpn config from /work/netlab_cicd/node_files/s1/evpn] ***
changed: [s1]

TASK [template] ****************************************************************
changed: [s2]

TASK [set_fact] ****************************************************************
ok: [s2]

TASK [run /tmp/config.sh to deploy evpn config from /work/netlab_cicd/node_files/s2/evpn] ***
changed: [s2]

TASK [run vtysh to import evpn config from /work/netlab_cicd/node_files/s2/evpn] ***
skipping: [s2]

PLAY [Deploy custom deployment templates] **************************************
skipping: no hosts matched

PLAY RECAP *********************************************************************
s1                         : ok=63   changed=12   unreachable=0    failed=0    skipped=16   rescued=0    ignored=0   
s2                         : ok=65   changed=13   unreachable=0    failed=0    skipped=23   rescued=0    ignored=0   

Results of configuration script deployments
================================================================================
h1                           OK: 2   
h2                           OK: 2   
h3                           OK: 2   
h4                           OK: 2   


The device under test is an EVPN PE-device bridging two VLANs over VXLAN. The
other EVPN PE-device is an FRR container.

Both VLANs are using the same IP prefix to identify potential inter-VLAN
leaking.

* h1 and h2 should be able to ping each other
* h3 and h4 should be able to ping each other
* h1 should not be able to reach h3 or h4

Please note it might take a while for the lab to work due to STP learning
phase