Creating Device configuration snippets [CREATED] dut: initial,lag,vlan,ospf [CREATED] x1: normalize,initial,lag,vlan,ospf [CREATED] x2: normalize,initial,lag,vlan,ospf Checking Are lab devices ready to be configured? [INFO] Checking lab devices with an Ansible playbook [WARNING]: Could not match supplied host pattern, ignoring: netlab_ready_ssh [WARNING]: Found variable using reserved name: hosts PLAY [Wait for SSH servers] **************************************************** skipping: no hosts matched PLAY [Wait for device-specific conditions] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [dut] TASK [Find device readiness script] ******************************************** ok: [dut] TASK [Wait for device to become ready] ***************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/readiness-check/junos.yml for dut TASK [set_fact] **************************************************************** ok: [dut] TASK [Wait for first interface (et-0/0/0)] ************************************* ok: [dut] PLAY RECAP ********************************************************************* dut : ok=5 changed=0 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0 Config Deploying device configurations [WARNING]: Found variable using reserved name: hosts PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [dut] ok: [x1] ok: [x2] TASK [Normalize config on bridge-like devices] ********************************* included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, x1, x2 TASK [Figure out whether to deploy the module normalize on current device] ***** ok: [dut] ok: [x1] ok: [x2] TASK [Find configuration template for normalize] ******************************* ok: [dut] ok: [x1] ok: [x2] TASK [fail] ******************************************************************** skipping: [dut] skipping: [x1] skipping: [x2] TASK [Find configuration deployment deploy_script for normalize] *************** ok: [dut] ok: [x1] ok: [x2] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [dut] ok: [x1] => { "msg": "normalize configuration for x1\n=========================================\n!\ninterface Ethernet1\n shutdown\n mac-address caf0.0002.0001\n!\ninterface Ethernet2\n shutdown\n mac-address caf0.0002.0002\n" } ok: [x2] => { "msg": "normalize configuration for x2\n=========================================\n!\ninterface Ethernet1\n shutdown\n mac-address caf0.0003.0001\n!\ninterface Ethernet2\n shutdown\n mac-address caf0.0003.0002\n" } TASK [Deploy normalize configuration] ****************************************** skipping: [dut] included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for x1, x2 TASK [eos_config: deploying normalize from /work/netlab_cicd/other_vm/node_files/x1/normalize] *** [WARNING]: To ensure idempotency and correct diff the input configuration lines should be similar to how they appear if present in the running configuration on device including the indentation changed: [x1] changed: [x2] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, x1, x2 TASK [Figure out whether to deploy the module initial on current device] ******* ok: [dut] ok: [x1] ok: [x2] TASK [Find configuration template for initial] ********************************* ok: [dut] ok: [x1] ok: [x2] TASK [fail] ******************************************************************** skipping: [dut] skipping: [x1] skipping: [x2] TASK [Find configuration deployment deploy_script for initial] ***************** ok: [dut] ok: [x1] ok: [x2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => { "msg": "initial configuration for dut\n=========================================\nsystem {\n host-name dut;\n static-host-mapping {\n x1 inet 10.0.0.2;\n x2 inet 10.0.0.3;\n }\n}\n\n\ninterfaces {\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n}\ninterfaces {\n\n lo0.0 {\n \n family inet {\n address 10.0.0.1/32;\n }\n \n }\n ae1.0 {\n description \"[Access VLAN red] dut -> x1\";\n \n \n }\n ae2.0 {\n description \"[Access VLAN blue] dut -> x2\";\n \n \n }\n et-0/0/0.0 {\n description \"dut -> x1\";\n \n \n }\n et-0/0/1.0 {\n description \"dut -> x1\";\n \n \n }\n et-0/0/2.0 {\n description \"dut -> x2\";\n \n \n }\n et-0/0/3.0 {\n description \"dut -> x2\";\n \n \n }\n irb.1000 {\n description \"VLAN red (1000) -> [x1]\";\n \n family inet {\n address 172.16.0.1/24;\n }\n \n }\n irb.1001 {\n description \"VLAN blue (1001) -> [x2]\";\n \n family inet {\n address 172.16.1.1/24;\n }\n \n }\n}\nprotocols {\n lldp {\n interface re0:mgmt-0 {\n disable;\n }\n interface all;\n }\n}\n" } ok: [x1] => { "msg": "initial configuration for x1\n=========================================\nhostname x1\n!\nlogging monitor debugging\naaa authorization exec default local\n!\nlldp run\nip routing\nno ipv6 unicast-routing\n!\n!\nip host dut 10.0.0.1 172.16.0.1 172.16.1.1\nip host x2 10.0.0.3 172.16.1.3\n!\ninterface Management1\n no lldp transmit\n no lldp receive\n!\ninterface Loopback0\n ip address 10.0.0.2/32\n!\ninterface port-channel1\n no switchport\n description [Access VLAN red] x1 -> dut\n!\ninterface Ethernet1\n no switchport\n description x1 -> dut\n mac-address caf0.0002.0001\n!\n no shutdown\n!\ninterface Ethernet2\n no switchport\n description x1 -> dut\n mac-address caf0.0002.0002\n!\n no shutdown\n!\ninterface Vlan1000\n description VLAN red (1000) -> [dut]\n ip address 172.16.0.2/24\n!\n" } ok: [x2] => { "msg": "initial configuration for x2\n=========================================\nhostname x2\n!\nlogging monitor debugging\naaa authorization exec default local\n!\nlldp run\nip routing\nno ipv6 unicast-routing\n!\n!\nip host dut 10.0.0.1 172.16.0.1 172.16.1.1\nip host x1 10.0.0.2 172.16.0.2\n!\ninterface Management1\n no lldp transmit\n no lldp receive\n!\ninterface Loopback0\n ip address 10.0.0.3/32\n!\ninterface port-channel1\n no switchport\n description [Access VLAN blue] x2 -> dut\n!\ninterface Ethernet1\n no switchport\n description x2 -> dut\n mac-address caf0.0003.0001\n!\n no shutdown\n!\ninterface Ethernet2\n no switchport\n description x2 -> dut\n mac-address caf0.0003.0002\n!\n no shutdown\n!\ninterface Vlan1001\n description VLAN blue (1001) -> [dut]\n ip address 172.16.1.3/24\n!\n" } TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/junos.yml for dut included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for x1, x2 TASK [junos_config: deploying initial from /work/netlab_cicd/other_vm/node_files/dut/initial] *** [WARNING]: mgd: statement has no contents; ignored changed: [dut] TASK [eos_config: deploying initial from /work/netlab_cicd/other_vm/node_files/x1/initial] *** changed: [x1] changed: [x2] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [dut] ok: [x1] ok: [x2] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, x1, x2 => (item=lag) included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, x1, x2 => (item=vlan) included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, x1, x2 => (item=ospf) TASK [Figure out whether to deploy the module lag on current device] *********** ok: [dut] ok: [x2] ok: [x1] TASK [Find configuration template for lag] ************************************* ok: [dut] ok: [x1] ok: [x2] TASK [fail] ******************************************************************** skipping: [dut] skipping: [x1] skipping: [x2] TASK [Find configuration deployment deploy_script for lag] ********************* ok: [dut] ok: [x1] ok: [x2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => { "msg": "lag configuration for dut\n=========================================\n\nchassis {\n aggregated-devices {\n ethernet {\n device-count 2;\n }\n }\n}\n\n\ninterfaces {\n\n ae1 {\n description \"[Access VLAN red] dut -> x1 (LAG)\";\n aggregated-ether-options {\n\n lacp {\n passive;\n periodic fast;\n }\n }\n }\n\n et-0/0/0 {\n description \"dut -> x1 in LAG 1\";\n ether-options {\n 802.3ad ae1;\n }\n delete: mtu;\n delete: unit 0;\n }\n et-0/0/1 {\n description \"dut -> x1 in LAG 1\";\n ether-options {\n 802.3ad ae1;\n }\n delete: mtu;\n delete: unit 0;\n }\n\n ae2 {\n description \"[Access VLAN blue] dut -> x2 (LAG)\";\n aggregated-ether-options {\n\n lacp {\n passive;\n periodic fast;\n }\n }\n }\n\n et-0/0/2 {\n description \"dut -> x2 in LAG 2\";\n ether-options {\n 802.3ad ae2;\n }\n delete: mtu;\n delete: unit 0;\n }\n et-0/0/3 {\n description \"dut -> x2 in LAG 2\";\n ether-options {\n 802.3ad ae2;\n }\n delete: mtu;\n delete: unit 0;\n }\n\n\n}\n" } ok: [x1] => { "msg": "lag configuration for x1\n=========================================\n\ninterface port-channel1\n description [Access VLAN red] x1 -> dut\n!\n!\n!\ninterface Ethernet1\n description x1 -> dut in channel-group 1\n channel-group 1 mode active\n lacp timer fast\n!\ninterface Ethernet2\n description x1 -> dut in channel-group 1\n channel-group 1 mode active\n lacp timer fast\n" } ok: [x2] => { "msg": "lag configuration for x2\n=========================================\n\ninterface port-channel1\n description [Access VLAN blue] x2 -> dut\n!\n!\n!\ninterface Ethernet1\n description x2 -> dut in channel-group 1\n channel-group 1 mode passive\n lacp timer fast\n!\ninterface Ethernet2\n description x2 -> dut in channel-group 1\n channel-group 1 mode passive\n lacp timer fast\n" } TASK [Deploy lag configuration] ************************************************ included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/junos.yml for dut included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for x1, x2 TASK [junos_config: deploying lag from /work/netlab_cicd/other_vm/node_files/dut/lag] *** [WARNING]: statement not found: mtu changed: [dut] TASK [eos_config: deploying lag from /work/netlab_cicd/other_vm/node_files/x1/lag] *** changed: [x2] changed: [x1] TASK [Figure out whether to deploy the module vlan on current device] ********** ok: [dut] ok: [x1] ok: [x2] TASK [Find configuration template for vlan] ************************************ ok: [dut] ok: [x1] ok: [x2] TASK [fail] ******************************************************************** skipping: [dut] skipping: [x1] skipping: [x2] TASK [Find configuration deployment deploy_script for vlan] ******************** ok: [dut] ok: [x1] ok: [x2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => { "msg": "vlan configuration for dut\n=========================================\nvlans {\n red {\n vlan-id 1000;\n\n l3-interface irb.1000;\n\n }\n blue {\n vlan-id 1001;\n\n l3-interface irb.1001;\n\n }\n}\n\ninterfaces {\n\n\n ae1.0 {\n family ethernet-switching {\n\n vlan {\n members red;\n }\n\n }\n }\n\n\n\n ae2.0 {\n family ethernet-switching {\n\n vlan {\n members blue;\n }\n\n }\n }\n\n\n}\n" } ok: [x1] => { "msg": "vlan configuration for x1\n=========================================\nvlan 1000\n name red\n!\n\n!\ninterface port-channel1\n switchport\n switchport access vlan 1000\n!\ninterface Vlan1000\n" } ok: [x2] => { "msg": "vlan configuration for x2\n=========================================\nvlan 1001\n name blue\n!\n\n!\ninterface port-channel1\n switchport\n switchport access vlan 1001\n!\ninterface Vlan1001\n" } TASK [Deploy vlan configuration] *********************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/junos.yml for dut included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for x1, x2 TASK [junos_config: deploying vlan from /work/netlab_cicd/other_vm/node_files/dut/vlan] *** changed: [dut] TASK [eos_config: deploying vlan from /work/netlab_cicd/other_vm/node_files/x1/vlan] *** changed: [x2] changed: [x1] TASK [Figure out whether to deploy the module ospf on current device] ********** ok: [dut] ok: [x1] ok: [x2] TASK [Find configuration template for ospf] ************************************ ok: [dut] ok: [x1] ok: [x2] TASK [fail] ******************************************************************** skipping: [dut] skipping: [x1] skipping: [x2] TASK [Find configuration deployment deploy_script for ospf] ******************** ok: [dut] ok: [x1] ok: [x2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => { "msg": "ospf configuration for dut\n=========================================\nrouting-options {\n router-id 10.0.0.1\n}\nprotocols {\n delete: ospf;\n}\n\nprotocols {\n ospf {\n area 0.0.0.0 {\n interface lo0.0 {\n }\n }\n area 0.0.0.0 {\n interface irb.1000 {\n interface-type p2p;\n }\n }\n area 0.0.0.0 {\n interface irb.1001 {\n interface-type p2p;\n }\n }\n }\n}\n\n" } ok: [x1] => { "msg": "ospf configuration for x1\n=========================================\n!\n! OSPFv2 configuration\n!\nrouter ospf 1\n router-id 10.0.0.2\n interface unnumbered hello mask tx 0.0.0.0\n timers spf delay initial 100 200 500\n timers lsa rx min interval 100\n timers lsa tx delay initial 100 200 500\n\n\n!\ninterface Loopback0\n! \n ip ospf area 0.0.0.0\n!\ninterface Vlan1000\n! VLAN red (1000) -> [dut]\n ip ospf area 0.0.0.0\n ip ospf network point-to-point\n!\n\n" } ok: [x2] => { "msg": "ospf configuration for x2\n=========================================\n!\n! OSPFv2 configuration\n!\nrouter ospf 1\n router-id 10.0.0.3\n interface unnumbered hello mask tx 0.0.0.0\n timers spf delay initial 100 200 500\n timers lsa rx min interval 100\n timers lsa tx delay initial 100 200 500\n\n\n!\ninterface Loopback0\n! \n ip ospf area 0.0.0.0\n!\ninterface Vlan1001\n! VLAN blue (1001) -> [dut]\n ip ospf area 0.0.0.0\n ip ospf network point-to-point\n!\n\n" } TASK [Deploy ospf configuration] *********************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/junos.yml for dut included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for x1, x2 TASK [junos_config: deploying ospf from /work/netlab_cicd/other_vm/node_files/dut/ospf] *** [WARNING]: statement not found changed: [dut] TASK [eos_config: deploying ospf from /work/netlab_cicd/other_vm/node_files/x1/ospf] *** changed: [x1] changed: [x2] PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* dut : ok=34 changed=4 unreachable=0 failed=0 skipped=7 rescued=0 ignored=0 x1 : ok=37 changed=5 unreachable=0 failed=0 skipped=5 rescued=0 ignored=0 x2 : ok=37 changed=5 unreachable=0 failed=0 skipped=5 rescued=0 ignored=0 The device under test is a L3 switch using passive LACP. It should be able to establish an OSPF-over-VLAN adjacency with an Arista EOS device using active LACP. but not with another Arista EOS device using passive LACP.