Warning in ansible: You're using Ansible version 12.x or higher; netlab might not work correctly
... Ansible core version 2.19 introduced breaking changes in templates and playbooks
... We tested netlab core with Ansible version 12.x but not every device template
... You might want to downgrade Ansible to version 11.10 or lower.
... Use 'netlab install ansible' on Ubuntu to do that
... Finally, please open a GitHub issue if you experience errors/crashes
... Set defaults.ansible.warnings.ver12 to False to hide this warning
 [INFO] Checking for updates in configuration templates
 [INFO] Creating configuration snippets
[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned
[WARNING]: Found variable using reserved name 'hosts'.
Origin: /work/netlab_cicd/hogs/group_vars/all/topology.yml:157:1

155     ipv4: 10.2.0.0/24
156     prefix: 32
157 hosts:
    ^ column 1


PLAY [Deploy initial device configuration] *************************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [r1]
ok: [r2]
ok: [r3]
ok: [r4]
ok: [dut]

TASK [Generic readiness tests] *************************************************
skipping: [r1]
skipping: [r2]
skipping: [r3]
skipping: [r4]
included: /home/pipi/netlab_gh/netsim/ansible/tasks/readiness-check/ssh.yml for dut => (item=ssh)

TASK [Check if 'sshpass' is installed] *****************************************
ok: [dut -> localhost]

TASK [Check for 'timeout' command] *********************************************
ok: [dut -> localhost]

TASK [Execute local ssh command to check ssh readiness] ************************
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (40 retries left).
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (39 retries left).
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (38 retries left).
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (37 retries left).
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (36 retries left).
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (35 retries left).
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (34 retries left).
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (33 retries left).
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (32 retries left).
ok: [dut -> localhost]

TASK [Confirm dut SSH server works] ********************************************
ok: [dut] => {
    "msg": "Node dut is ready."
}

TASK [Find device readiness script] ********************************************
ok: [r1]
ok: [r2]
ok: [r3]
ok: [r4]
ok: [dut]

TASK [Wait for device to become ready] *****************************************
skipping: [r1]
skipping: [r2]
skipping: [r3]
skipping: [r4]
included: /home/pipi/netlab_gh/netsim/ansible/tasks/readiness-check/junos.yml for dut

TASK [set_fact] ****************************************************************
ok: [dut]

TASK [Wait for first interface (ge-0/0/0)] *************************************
ok: [dut]

TASK [Normalize config on bridge-like devices] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r3
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r4

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [dut]

TASK [Find configuration template for normalize] *******************************
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [dut]

TASK [Deploy normalize configuration] ******************************************
skipping: [dut]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [r1]

TASK [Find configuration template for normalize] *******************************
ok: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r1]

TASK [Deploy normalize configuration] ******************************************
skipping: [r1]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [r2]

TASK [Find configuration template for normalize] *******************************
ok: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r2]

TASK [Deploy normalize configuration] ******************************************
skipping: [r2]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [r3]

TASK [Find configuration template for normalize] *******************************
ok: [r3]

TASK [fail] ********************************************************************
skipping: [r3]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [r3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r3]

TASK [Deploy normalize configuration] ******************************************
skipping: [r3]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [r4]

TASK [Find configuration template for normalize] *******************************
ok: [r4]

TASK [fail] ********************************************************************
skipping: [r4]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [r4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r4]

TASK [Deploy normalize configuration] ******************************************
skipping: [r4]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r3
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r4

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [dut]

TASK [Find configuration template for initial] *********************************
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => {
    "msg": "initial configuration for dut\n=========================================\nsystem {\n  host-name dut;\n  static-host-mapping {\n    r1 inet 10.0.0.2;\n    r2 inet 10.0.0.3;\n    r3 inet 10.0.0.4;\n    r4 inet 10.0.0.5;\n  }\n}\n\n\n\n\npolicy-options {\n  community tg_65000_1 members target:65000:1;\n  community tg_65000_2 members target:65000:2;\n}\n\n\n\npolicy-options {\n  policy-statement vrf-red-rt-export {\n    term 1 {\n      then {\n        community add tg_65000_1;\n        accept;\n      }\n    }\n  }\n\n\n  policy-statement vrf-red-rt-import {\n    term 1 {\n      from community [ tg_65000_1 ];\n      then accept;\n    }\n    term default {\n      then reject;\n    }\n  }\n  policy-statement vrf-blue-rt-export {\n    term 1 {\n      then {\n        community add tg_65000_2;\n        accept;\n      }\n    }\n  }\n\n\n  policy-statement vrf-blue-rt-import {\n    term 1 {\n      from community [ tg_65000_2 ];\n      then accept;\n    }\n    term default {\n      then reject;\n    }\n  }\n}\n\nrouting-instances {\n\n  red {\n    instance-type vrf;\n    route-distinguisher 65000:1;\n\n    vrf-import vrf-red-rt-import;\n    vrf-export vrf-red-rt-export;\n\n    routing-options {\n      auto-export;\n    }\n\n    interface ge-0/0/0.0;\n    interface ge-0/0/1.0;\n\n  }\n\n\n  blue {\n    instance-type vrf;\n    route-distinguisher 65000:2;\n\n    vrf-import vrf-blue-rt-import;\n    vrf-export vrf-blue-rt-export;\n\n    routing-options {\n      auto-export;\n    }\n\n    interface ge-0/0/2.0;\n    interface ge-0/0/3.0;\n\n  }\n\n}\ninterfaces {\n  ge-0/0/0 {\n    mtu 1514;\n  }\n  ge-0/0/1 {\n    mtu 1514;\n  }\n  ge-0/0/2 {\n    mtu 1514;\n  }\n  ge-0/0/3 {\n    mtu 1514;\n  }\n\n  lo0.0 {\n    \n      family inet {\n        address 10.0.0.1/32;\n      }\n    \n  }\n  ge-0/0/0.0 {\n    description \"dut -> r1\";\n    \n      family inet {\n        address 10.1.0.1/30;\n      }\n    \n  }\n  ge-0/0/1.0 {\n    description \"dut -> r2 [external]\";\n    \n      family inet {\n        address 10.1.0.5/30;\n      }\n    \n  }\n  ge-0/0/2.0 {\n    description \"dut -> r3\";\n    \n      family inet {\n        address 10.1.0.9/30;\n      }\n    \n  }\n  ge-0/0/3.0 {\n    description \"dut -> r4 [external]\";\n    \n      family inet {\n        address 10.1.0.13/30;\n      }\n    \n  }\n}\nprotocols {\n  lldp {\n    interface fxp0 {\n      disable;\n    }\n    interface all;\n  }\n}\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/junos.yml for dut

TASK [junos_config: deploying initial from /work/netlab_cicd/hogs/node_files/dut/initial] ***
changed: [dut]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [r1]

TASK [Find configuration template for initial] *********************************
ok: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r1] => {
    "msg": "initial configuration for r1\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=1\nsysctl -w net.ipv6.conf.all.forwarding=0\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.disable_ipv6=1\nip link set dev eth1 mtu 1500\nip link set eth1 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname r1\n!\nlog file /tmp/logging\n\n!\nip forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ip address 10.0.0.2/32\n!\ninterface eth1\n no shutdown\n description r1 -> dut\n ip address 10.1.0.2/30\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for r1

TASK [Attempt to load VRF kernel module] ***************************************
changed: [r1 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [r1]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for r1

TASK [template] ****************************************************************
changed: [r1]

TASK [set_fact] ****************************************************************
ok: [r1]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/hogs/node_files/r1/initial] ***
changed: [r1]

TASK [run vtysh to import initial config from /work/netlab_cicd/hogs/node_files/r1/initial] ***
skipping: [r1]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [r2]

TASK [Find configuration template for initial] *********************************
ok: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r2] => {
    "msg": "initial configuration for r2\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=1\nsysctl -w net.ipv6.conf.all.forwarding=0\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.disable_ipv6=1\nip link set dev eth1 mtu 1500\nip link set eth1 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname r2\n!\nlog file /tmp/logging\n\n!\nip forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ip address 10.0.0.3/32\n!\ninterface eth1\n no shutdown\n description r2 -> dut [external]\n ip address 10.1.0.6/30\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for r2

TASK [Attempt to load VRF kernel module] ***************************************
changed: [r2 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [r2]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for r2

TASK [template] ****************************************************************
changed: [r2]

TASK [set_fact] ****************************************************************
ok: [r2]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/hogs/node_files/r2/initial] ***
changed: [r2]

TASK [run vtysh to import initial config from /work/netlab_cicd/hogs/node_files/r2/initial] ***
skipping: [r2]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [r3]

TASK [Find configuration template for initial] *********************************
ok: [r3]

TASK [fail] ********************************************************************
skipping: [r3]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [r3]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r3] => {
    "msg": "initial configuration for r3\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=1\nsysctl -w net.ipv6.conf.all.forwarding=0\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.disable_ipv6=1\nip link set dev eth1 mtu 1500\nip link set eth1 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname r3\n!\nlog file /tmp/logging\n\n!\nip forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ip address 10.0.0.4/32\n!\ninterface eth1\n no shutdown\n description r3 -> dut\n ip address 10.1.0.10/30\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for r3

TASK [Attempt to load VRF kernel module] ***************************************
changed: [r3 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [r3]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for r3

TASK [template] ****************************************************************
changed: [r3]

TASK [set_fact] ****************************************************************
ok: [r3]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/hogs/node_files/r3/initial] ***
changed: [r3]

TASK [run vtysh to import initial config from /work/netlab_cicd/hogs/node_files/r3/initial] ***
skipping: [r3]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [r4]

TASK [Find configuration template for initial] *********************************
ok: [r4]

TASK [fail] ********************************************************************
skipping: [r4]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [r4]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r4] => {
    "msg": "initial configuration for r4\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=1\nsysctl -w net.ipv6.conf.all.forwarding=0\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.disable_ipv6=1\nip link set dev eth1 mtu 1500\nip link set eth1 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname r4\n!\nlog file /tmp/logging\n\n!\nip forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ip address 10.0.0.5/32\n!\ninterface eth1\n no shutdown\n description r4 -> dut [external]\n ip address 10.1.0.14/30\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for r4

TASK [Attempt to load VRF kernel module] ***************************************
changed: [r4 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [r4]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for r4

TASK [template] ****************************************************************
changed: [r4]

TASK [set_fact] ****************************************************************
ok: [r4]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/hogs/node_files/r4/initial] ***
changed: [r4]

TASK [run vtysh to import initial config from /work/netlab_cicd/hogs/node_files/r4/initial] ***
skipping: [r4]

PLAY [Deploy module-specific configurations] ***********************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [r1]
ok: [r2]
ok: [r3]
ok: [r4]
ok: [dut]

TASK [Deploy individual configuration modules] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut => (item=vrf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1 => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1 => (item=vrf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2 => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r2 => (item=vrf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r3 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r3 => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r3 => (item=vrf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r4 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r4 => (item=bgp)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r4 => (item=vrf)

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [dut]

TASK [Find configuration template for ospf] ************************************
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Find configuration deployment deploy_script for ospf] ********************
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => {
    "msg": "ospf configuration for dut\n=========================================\n"
}

TASK [Deploy ospf configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/junos.yml for dut

TASK [junos_config: deploying ospf from /work/netlab_cicd/hogs/node_files/dut/ospf] ***
ok: [dut]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [dut]

TASK [Find configuration template for bgp] *************************************
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Find configuration deployment deploy_script for bgp] *********************
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => {
    "msg": "bgp configuration for dut\n=========================================\n\nrouting-options {\n  autonomous-system 65000;\n  router-id 10.0.0.1\n}\n\n\npolicy-options community x-route-permit-mark members large:65535:0:65536;\n\npolicy-options {\n  delete: policy-statement bgp-advertise;\n  delete: policy-statement bgp-redistribute;\n  delete: policy-statement next-hop-ebgp-ipv4;\n  delete: policy-statement next-hop-all-ipv4;\n  delete: policy-statement next-hop-ebgp-ipv6;\n  delete: policy-statement next-hop-all-ipv6;\n  delete: route-filter-list bgp-announce;\n}\n\npolicy-options {\n\n  route-filter-list bgp-announce {\n  }\n\n  policy-statement next-hop-ebgp-ipv4 {\n    term next-hop-self-ipv4 {\n      from {\n        family inet;\n        route-type external;\n      }\n      then {\n        next-hop self;\n      }\n    }\n  }\n\n  policy-statement next-hop-all-ipv4 {\n    term next-hop-self-ipv4 {\n      from {\n        family inet;\n      }\n      then {\n        next-hop self;\n      }\n    }\n  }\n\n  policy-statement next-hop-ebgp-ipv6 {\n    term next-hop-self-ipv6 {\n      from {\n        family inet6;\n        route-type external;\n      }\n      then {\n        next-hop self;\n      }\n    }\n  }\n\n  policy-statement next-hop-all-ipv6 {\n    term next-hop-self-ipv6 {\n      from {\n        family inet6;\n      }\n      then {\n        next-hop self;\n      }\n    }\n  }\n\n\n  policy-statement bgp-advertise {\n    term advertise {\n      from {\n        protocol direct;\n        interface [ \n lo0.0  ];\n      }\n      then {\n        community add x-route-permit-mark;\n        next policy;\n      }\n    }\n\n    term originate {\n      from {\n        protocol static;\n        route-filter-list bgp-announce;\n      }\n      then {\n        community add x-route-permit-mark;\n        next policy;\n      }\n    }\n\n  }\n\n  policy-statement bgp-redistribute {\n    term redis_bgp {\n      from protocol bgp;\n      then {\n        community add x-route-permit-mark;\n        next policy;\n      }\n    }\n  }\n\n  policy-statement bgp-final {\n    term final-option {\n      from community x-route-permit-mark;\n      then {\n        community delete x-route-permit-mark;\n        accept;\n      }\n    }\n    term default-reject {\n      then reject;\n    }\n  }\n\n  policy-statement bgp-initial {\n    term initial-cleanup {\n      from community x-route-permit-mark;\n      then {\n        community delete x-route-permit-mark;\n        next policy;\n      }\n    }\n  }\n\n}\nprotocols {\n  delete: bgp;\n}\nprotocols {\n  bgp {\n    group ibgp-peers-ipv4 {\n      type internal;\n      export [ \n          next-hop-ebgp-ipv4 bgp-advertise bgp-redistribute bgp-final\n        ];\n      advertise-inactive;\n    }\n    group ebgp-peers {\n      export [ \n          bgp-advertise bgp-redistribute bgp-final\n        ];\n      advertise-inactive;\n    }\n  }\n}\n"
}

TASK [Deploy bgp configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/junos.yml for dut

TASK [junos_config: deploying bgp from /work/netlab_cicd/hogs/node_files/dut/bgp] ***
[WARNING]: statement not found
changed: [dut]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [dut]

TASK [Find configuration template for vrf] *************************************
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Find configuration deployment deploy_script for vrf] *********************
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => {
    "msg": "vrf configuration for dut\n=========================================\n\n\npolicy-options {\n  community x-route-permit-mark members large:65535:0:65536;\n\n  policy-statement vrf-red-bgp-export {\n    term redis_bgp {\n      from {\n        protocol bgp;\n      }\n      then {\n        community add x-route-permit-mark;\n        next policy;\n      }\n    }\n    term redis_direct {\n      from {\n        protocol direct;\n      }\n      then {\n        community add x-route-permit-mark;\n        next policy;\n      }\n    }\n    term redis_ospf {\n      from {\n        protocol ospf;\n      }\n      then {\n        community add x-route-permit-mark;\n        next policy;\n      }\n    }\n    term redis_ospf3 {\n      from {\n        protocol ospf3;\n      }\n      then {\n        community add x-route-permit-mark;\n        next policy;\n      }\n    }\n  }\n\n\n  policy-statement vrf-blue-bgp-export {\n    term redis_bgp {\n      from {\n        protocol bgp;\n      }\n      then {\n        community add x-route-permit-mark;\n        next policy;\n      }\n    }\n    term redis_direct {\n      from {\n        protocol direct;\n      }\n      then {\n        community add x-route-permit-mark;\n        next policy;\n      }\n    }\n    term redis_ospf {\n      from {\n        protocol ospf;\n      }\n      then {\n        community add x-route-permit-mark;\n        next policy;\n      }\n    }\n    term redis_ospf3 {\n      from {\n        protocol ospf3;\n      }\n      then {\n        community add x-route-permit-mark;\n        next policy;\n      }\n    }\n  }\n\n}\n\n\nrouting-instances {\n\n  red {\n    routing-options {\n      autonomous-system 65000;\n      router-id 10.0.0.1\n    }\n\n    protocols {\n      bgp {\n\n        group ebgp-peers {\n          export [ vrf-red-bgp-export bgp-final ];\n          advertise-inactive;\n          neighbor 10.1.0.6 {\n\n            peer-as 65100;\n            description r2;\n          }\n        }\n      }\n    }\n  }\n\n\n  blue {\n    routing-options {\n      autonomous-system 65000;\n      router-id 10.0.0.1\n    }\n\n    protocols {\n      bgp {\n\n        group ebgp-peers {\n          export [ vrf-blue-bgp-export bgp-final ];\n          advertise-inactive;\n          neighbor 10.1.0.14 {\n\n            peer-as 65101;\n            description r4;\n          }\n        }\n      }\n    }\n  }\n\n}\nrouting-instances {\n  red {\n    routing-options {\n      router-id 10.100.0.1\n    }\n  }\n}\n\npolicy-options {\n  policy-statement vrf-red-ospf-export {\n    term redis_direct {\n      from {\n        protocol direct;\n      }\n      then accept;\n    }\n    term redis_bgp {\n      from protocol bgp;\n      then {\n        accept;\n      }\n    }\n    term redis_local_target {\n      from community [ tg_65000_1 ];\n      then accept;\n    }\n  }\n}\nrouting-instances {\n  red {\nprotocols {\n  delete: ospf;\n}\n\nprotocols {\n  ospf {\n    export vrf-red-ospf-export;\n    area 0.0.0.0 {\n      interface ge-0/0/0.0 {\n        interface-type p2p;\n      }\n    }\n  }\n}\n} }\n\nrouting-instances {\n  blue {\n    routing-options {\n      router-id 10.101.0.1\n    }\n  }\n}\n\npolicy-options {\n  policy-statement vrf-blue-ospf-export {\n    term redis_direct {\n      from {\n        protocol direct;\n      }\n      then accept;\n    }\n    term redis_bgp {\n      from protocol bgp;\n      then {\n        accept;\n      }\n    }\n    term redis_local_target {\n      from community [ tg_65000_2 ];\n      then accept;\n    }\n  }\n}\nrouting-instances {\n  blue {\nprotocols {\n  delete: ospf;\n}\n\nprotocols {\n  ospf {\n    export vrf-blue-ospf-export;\n    area 0.0.0.0 {\n      interface ge-0/0/2.0 {\n        interface-type p2p;\n      }\n    }\n  }\n}\n} }\n\n"
}

TASK [Deploy vrf configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/junos.yml for dut

TASK [junos_config: deploying vrf from /work/netlab_cicd/hogs/node_files/dut/vrf] ***
changed: [dut]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [r1]

TASK [Find configuration template for ospf] ************************************
ok: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for ospf] ********************
ok: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r1] => {
    "msg": "ospf configuration for r1\n=========================================\n!\n! OSPFv2 FRR configuration\n!\nrouter ospf\n ospf router-id 10.0.0.2\n timers throttle spf 10 50 500\n timers throttle lsa all 100\n timers lsa min-arrival 100\n\n\nexit\n!\ninterface lo\n! \n ip ospf area 0.0.0.0\n!\ninterface eth1\n! r1 -> dut\n ip ospf area 0.0.0.0\n ip ospf network point-to-point\n!\n\n!\ndo write\n"
}

TASK [Deploy ospf configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for r1

TASK [template] ****************************************************************
changed: [r1]

TASK [set_fact] ****************************************************************
ok: [r1]

TASK [run /tmp/config.sh to deploy ospf config from /work/netlab_cicd/hogs/node_files/r1/ospf] ***
skipping: [r1]

TASK [run vtysh to import ospf config from /work/netlab_cicd/hogs/node_files/r1/ospf] ***
changed: [r1]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [r1]

TASK [Find configuration template for bgp] *************************************
skipping: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for bgp] *********************
skipping: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r1]

TASK [Deploy bgp configuration] ************************************************
skipping: [r1]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [r1]

TASK [Find configuration template for vrf] *************************************
skipping: [r1]

TASK [fail] ********************************************************************
skipping: [r1]

TASK [Find configuration deployment deploy_script for vrf] *********************
skipping: [r1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r1]

TASK [Deploy vrf configuration] ************************************************
skipping: [r1]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [r2]

TASK [Find configuration template for ospf] ************************************
skipping: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for ospf] ********************
skipping: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r2]

TASK [Deploy ospf configuration] ***********************************************
skipping: [r2]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [r2]

TASK [Find configuration template for bgp] *************************************
ok: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for bgp] *********************
ok: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r2] => {
    "msg": "bgp configuration for r2\n=========================================\n!\nrouter bgp 65100\n  no bgp ebgp-requires-policy\n  no bgp default ipv4-unicast\n  bgp default show-hostname\n  bgp default show-nexthop-hostname\n  ! Consider AS paths of same length but with different AS as ECMP candidates\n  bgp bestpath as-path multipath-relax\n\n  bgp router-id 10.0.0.3\n!\n  neighbor 10.1.0.5 remote-as 65000\n  neighbor 10.1.0.5 description dut\n!\n address-family ipv4 unicast\n!\n\n!\n! Originate networks from connected subnets\n!\n  network 10.0.0.3/32\n!\n  neighbor 10.1.0.5 activate\n  no neighbor 10.1.0.5 send-community all\n  neighbor 10.1.0.5 send-community standard\n  neighbor 10.1.0.5 send-community large\n!\n!\n!\ndo write\n"
}

TASK [Deploy bgp configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for r2

TASK [template] ****************************************************************
changed: [r2]

TASK [set_fact] ****************************************************************
ok: [r2]

TASK [run /tmp/config.sh to deploy bgp config from /work/netlab_cicd/hogs/node_files/r2/bgp] ***
skipping: [r2]

TASK [run vtysh to import bgp config from /work/netlab_cicd/hogs/node_files/r2/bgp] ***
changed: [r2]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [r2]

TASK [Find configuration template for vrf] *************************************
skipping: [r2]

TASK [fail] ********************************************************************
skipping: [r2]

TASK [Find configuration deployment deploy_script for vrf] *********************
skipping: [r2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r2]

TASK [Deploy vrf configuration] ************************************************
skipping: [r2]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [r3]

TASK [Find configuration template for ospf] ************************************
ok: [r3]

TASK [fail] ********************************************************************
skipping: [r3]

TASK [Find configuration deployment deploy_script for ospf] ********************
ok: [r3]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r3] => {
    "msg": "ospf configuration for r3\n=========================================\n!\n! OSPFv2 FRR configuration\n!\nrouter ospf\n ospf router-id 10.0.0.4\n timers throttle spf 10 50 500\n timers throttle lsa all 100\n timers lsa min-arrival 100\n\n\nexit\n!\ninterface lo\n! \n ip ospf area 0.0.0.0\n!\ninterface eth1\n! r3 -> dut\n ip ospf area 0.0.0.0\n ip ospf network point-to-point\n!\n\n!\ndo write\n"
}

TASK [Deploy ospf configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for r3

TASK [template] ****************************************************************
changed: [r3]

TASK [set_fact] ****************************************************************
ok: [r3]

TASK [run /tmp/config.sh to deploy ospf config from /work/netlab_cicd/hogs/node_files/r3/ospf] ***
skipping: [r3]

TASK [run vtysh to import ospf config from /work/netlab_cicd/hogs/node_files/r3/ospf] ***
changed: [r3]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [r3]

TASK [Find configuration template for bgp] *************************************
skipping: [r3]

TASK [fail] ********************************************************************
skipping: [r3]

TASK [Find configuration deployment deploy_script for bgp] *********************
skipping: [r3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r3]

TASK [Deploy bgp configuration] ************************************************
skipping: [r3]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [r3]

TASK [Find configuration template for vrf] *************************************
skipping: [r3]

TASK [fail] ********************************************************************
skipping: [r3]

TASK [Find configuration deployment deploy_script for vrf] *********************
skipping: [r3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r3]

TASK [Deploy vrf configuration] ************************************************
skipping: [r3]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [r4]

TASK [Find configuration template for ospf] ************************************
skipping: [r4]

TASK [fail] ********************************************************************
skipping: [r4]

TASK [Find configuration deployment deploy_script for ospf] ********************
skipping: [r4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r4]

TASK [Deploy ospf configuration] ***********************************************
skipping: [r4]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [r4]

TASK [Find configuration template for bgp] *************************************
ok: [r4]

TASK [fail] ********************************************************************
skipping: [r4]

TASK [Find configuration deployment deploy_script for bgp] *********************
ok: [r4]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [r4] => {
    "msg": "bgp configuration for r4\n=========================================\n!\nrouter bgp 65101\n  no bgp ebgp-requires-policy\n  no bgp default ipv4-unicast\n  bgp default show-hostname\n  bgp default show-nexthop-hostname\n  ! Consider AS paths of same length but with different AS as ECMP candidates\n  bgp bestpath as-path multipath-relax\n\n  bgp router-id 10.0.0.5\n!\n  neighbor 10.1.0.13 remote-as 65000\n  neighbor 10.1.0.13 description dut\n!\n address-family ipv4 unicast\n!\n\n!\n! Originate networks from connected subnets\n!\n  network 10.0.0.5/32\n!\n  neighbor 10.1.0.13 activate\n  no neighbor 10.1.0.13 send-community all\n  neighbor 10.1.0.13 send-community standard\n  neighbor 10.1.0.13 send-community large\n!\n!\n!\ndo write\n"
}

TASK [Deploy bgp configuration] ************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for r4

TASK [template] ****************************************************************
changed: [r4]

TASK [set_fact] ****************************************************************
ok: [r4]

TASK [run /tmp/config.sh to deploy bgp config from /work/netlab_cicd/hogs/node_files/r4/bgp] ***
skipping: [r4]

TASK [run vtysh to import bgp config from /work/netlab_cicd/hogs/node_files/r4/bgp] ***
changed: [r4]

TASK [Figure out whether to deploy the module vrf on current device] ***********
ok: [r4]

TASK [Find configuration template for vrf] *************************************
skipping: [r4]

TASK [fail] ********************************************************************
skipping: [r4]

TASK [Find configuration deployment deploy_script for vrf] *********************
skipping: [r4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [r4]

TASK [Deploy vrf configuration] ************************************************
skipping: [r4]

PLAY [Deploy custom deployment templates] **************************************
skipping: no hosts matched

PLAY RECAP *********************************************************************
dut                        : ok=43   changed=3    unreachable=0    failed=0    skipped=7    rescued=0    ignored=0   
r1                         : ok=31   changed=5    unreachable=0    failed=0    skipped=20   rescued=0    ignored=0   
r2                         : ok=31   changed=5    unreachable=0    failed=0    skipped=20   rescued=0    ignored=0   
r3                         : ok=31   changed=5    unreachable=0    failed=0    skipped=20   rescued=0    ignored=0   
r4                         : ok=31   changed=5    unreachable=0    failed=0    skipped=20   rescued=0    ignored=0   


Warning: The following warnings were generated during the 'netlab initial' processing
Warning: ansible: You're using Ansible version 12.x or higher; netlab might not work correctly
[CREATED] dut: initial,ospf,bgp,vrf
[CREATED] r1: initial,ospf
[CREATED] r2: initial,bgp
[CREATED] r3: initial,ospf
[CREATED] r4: initial,bgp


The device under test has two VRFs with two interfaces in each VRF.
Routers are attached to those interfaces and run OSPF and BGP with
device under test. Assuming the OSPF and BGP multi-vrf test cases
succeeded, this one tests OSPF-to-BGP two-way redistribution.

* r1 and r2 should be able to ping each other
* r3 and r4 should be able to ping each other
* r1 should not be able to reach r3