Warning in ansible: You're using Ansible version 12.x or higher; netlab might not work correctly
... Ansible core version 2.19 introduced breaking changes in templates and playbooks
... We tested netlab core with Ansible version 12.x but not every device template
... You might want to downgrade Ansible to version 11.10 or lower.
... Use 'netlab install ansible' on Ubuntu to do that
... Finally, please open a GitHub issue if you experience errors/crashes
... Set defaults.ansible.warnings.ver12 to False to hide this warning
 [INFO] Checking for updates in configuration templates
 [INFO] Creating configuration snippets
[CREATED] h1: initial,routing
[CREATED] h2: initial,routing
[CREATED] h3: initial,routing
[CREATED] h4: initial,routing
[CREATED] s1: initial,vlan,ospf
[CREATED] s2: initial,vlan,ospf
 [INFO] Executing initial configuration for node h1 (namespace clab-
          ml_23-h1)
 [INFO] Executing routing configuration for node h1 (namespace clab-
          ml_23-h1)
 [INFO] Executing initial configuration for node h2 (namespace clab-
          ml_23-h2)
 [INFO] Executing routing configuration for node h2 (namespace clab-
          ml_23-h2)
 [INFO] Executing initial configuration for node h3 (namespace clab-
          ml_23-h3)
 [INFO] Executing routing configuration for node h3 (namespace clab-
          ml_23-h3)
 [INFO] Executing initial configuration for node h4 (namespace clab-
          ml_23-h4)
 [INFO] Executing routing configuration for node h4 (namespace clab-
          ml_23-h4)

 [INFO] Starting Ansible playbook to deploy the rest of the
          configurations
[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned
[WARNING]: Found variable using reserved name 'hosts'.
Origin: /work/netlab_cicd/hogs/group_vars/all/topology.yml:157:1

155     ipv4: 10.2.0.0/24
156     prefix: 32
157 hosts:
    ^ column 1


PLAY [Deploy initial device configuration] *************************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [h1]
ok: [h2]
ok: [h3]
ok: [h4]
ok: [s2]
ok: [s1]

TASK [Generic readiness tests] *************************************************
skipping: [h1]
skipping: [h2]
skipping: [h3]
skipping: [h4]
skipping: [s2]
included: /home/pipi/netlab_gh/netsim/ansible/tasks/readiness-check/ssh.yml for s1 => (item=ssh)

TASK [Check if 'sshpass' is installed] *****************************************
ok: [s1 -> localhost]

TASK [Check for 'timeout' command] *********************************************
ok: [s1 -> localhost]

TASK [Execute local ssh command to check ssh readiness] ************************
FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (60 retries left).
FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (59 retries left).
FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (58 retries left).
FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (57 retries left).
FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (56 retries left).
FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (55 retries left).
FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (54 retries left).
FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (53 retries left).
FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (52 retries left).
ok: [s1 -> localhost]

TASK [Confirm s1 SSH server works] *********************************************
ok: [s1] => {
    "msg": "Node s1 is ready."
}

TASK [Find device readiness script] ********************************************
ok: [h1]
ok: [h2]
ok: [h3]
ok: [h4]
ok: [s2]
ok: [s1]

TASK [Wait for device to become ready] *****************************************
skipping: [h1]
skipping: [h2]
skipping: [h3]
skipping: [h4]
skipping: [s2]
included: /home/pipi/netlab_gh/netsim/ansible/tasks/readiness-check/junos.yml for s1

TASK [set_fact] ****************************************************************
ok: [s1]

TASK [Wait for first interface (ge-0/0/0)] *************************************
ok: [s1]

TASK [Normalize config on bridge-like devices] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h3
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h4
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s2

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [h1]

TASK [Find configuration template for normalize] *******************************
ok: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy normalize configuration] ******************************************
skipping: [h1]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [h2]

TASK [Find configuration template for normalize] *******************************
ok: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy normalize configuration] ******************************************
skipping: [h2]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [h3]

TASK [Find configuration template for normalize] *******************************
ok: [h3]

TASK [fail] ********************************************************************
skipping: [h3]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [h3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h3]

TASK [Deploy normalize configuration] ******************************************
skipping: [h3]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [h4]

TASK [Find configuration template for normalize] *******************************
ok: [h4]

TASK [fail] ********************************************************************
skipping: [h4]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [h4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h4]

TASK [Deploy normalize configuration] ******************************************
skipping: [h4]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [s1]

TASK [Find configuration template for normalize] *******************************
ok: [s1]

TASK [fail] ********************************************************************
skipping: [s1]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [s1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [s1]

TASK [Deploy normalize configuration] ******************************************
skipping: [s1]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [s2]

TASK [Find configuration template for normalize] *******************************
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s2]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [s2]

TASK [Deploy normalize configuration] ******************************************
skipping: [s2]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h3
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h4
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s2

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [h1]

TASK [Find configuration template for initial] *********************************
skipping: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy initial configuration] ********************************************
skipping: [h1]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [h2]

TASK [Find configuration template for initial] *********************************
skipping: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy initial configuration] ********************************************
skipping: [h2]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [h3]

TASK [Find configuration template for initial] *********************************
skipping: [h3]

TASK [fail] ********************************************************************
skipping: [h3]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [h3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h3]

TASK [Deploy initial configuration] ********************************************
skipping: [h3]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [h4]

TASK [Find configuration template for initial] *********************************
skipping: [h4]

TASK [fail] ********************************************************************
skipping: [h4]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [h4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h4]

TASK [Deploy initial configuration] ********************************************
skipping: [h4]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [s1]

TASK [Find configuration template for initial] *********************************
ok: [s1]

TASK [fail] ********************************************************************
skipping: [s1]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [s1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s1] => {
    "msg": "initial configuration for s1\n=========================================\nsystem {\n  host-name s1;\n  static-host-mapping {\n    h1 inet 172.16.0.1;\n    h2 inet 172.16.0.2;\n    h3 inet 172.16.1.3;\n    h4 inet 172.16.2.4;\n    s2 inet 10.0.0.6;\n  }\n}\n\n\ninterfaces {\n\n\n\n\n\n  ge-0/0/0 {\n    flexible-vlan-tagging;\n    native-vlan-id 701;\n  }\n\n  ge-0/0/0.0 {\n    vlan-id 701;\n  }\n\n\n\n\n\n\n\n\n\n\n  ge-0/0/1 {\n    flexible-vlan-tagging;\n    native-vlan-id 700;\n  }\n\n  ge-0/0/1.0 {\n    vlan-id 700;\n  }\n\n\n\n\n\n\n\n  ge-0/0/2 {\n    flexible-vlan-tagging;\n    native-vlan-id 1;\n  }\n\n  ge-0/0/2.0 {\n    vlan-id 1;\n  }\n\n\n\n\n\n\n\n\n  ge-0/0/0 {\n    flexible-vlan-tagging;\n  }\n\n  ge-0/0/0.700 {\n    vlan-id 700;\n  }\n\n\n\n\n\n\n\n\n\n\n\n\n\n}\ninterfaces {\n  ge-0/0/0 {\n    mtu 1522;\n  }\n  ge-0/0/1 {\n    mtu 1522;\n  }\n  ge-0/0/2 {\n    mtu 1522;\n  }\n\n  lo0.0 {\n    \n      family inet {\n        address 10.0.0.5/32;\n      }\n    \n  }\n  ge-0/0/0.0 {\n    description \"s1 -> s2\";\n    \n      family inet {\n        address 10.1.0.1/30;\n      }\n    \n  }\n  ge-0/0/1.0 {\n    description \"[Access VLAN red] s1 -> h1\";\n    \n    \n  }\n  ge-0/0/2.0 {\n    description \"s1 -> h3 [stub]\";\n    \n      family inet {\n        address 172.16.1.5/24;\n      }\n    \n  }\n  ge-0/0/0.700 {\n    description \"[SubIf VLAN red] s1 -> s2\";\n    \n    \n  }\n  irb.700 {\n    description \"VLAN red (700) -> [h1,h2,s2]\";\n    \n    \n  }\n}\nprotocols {\n  lldp {\n    interface fxp0 {\n      disable;\n    }\n    interface all;\n  }\n}\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/junos.yml for s1

TASK [junos_config: deploying initial from /work/netlab_cicd/hogs/node_files/s1/initial] ***
changed: [s1]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [s2]

TASK [Find configuration template for initial] *********************************
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s2]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s2] => {
    "msg": "initial configuration for s2\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=1\nsysctl -w net.ipv6.conf.all.forwarding=0\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.disable_ipv6=1\nip link set dev eth1 mtu 1500\nip link set eth1 up\nip link set eth2 down\nsysctl -qw net.ipv6.conf.eth2.disable_ipv6=1\nip link set dev eth2 mtu 1500\nip link set eth2 up\nip link set eth3 down\nsysctl -qw net.ipv6.conf.eth3.disable_ipv6=1\nip link set dev eth3 mtu 1500\nip link set eth3 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname s2\n!\nlog file /tmp/logging\n\n!\nip forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ip address 10.0.0.6/32\n!\ninterface eth1\n no shutdown\n description s2 -> s1\n ip address 10.1.0.2/30\n!\ninterface eth2\n no shutdown\n description [Access VLAN red] s2 -> h2\n ! no ip address\n!\ninterface eth3\n no shutdown\n description s2 -> h4 [stub]\n ip address 172.16.2.6/24\n!\ninterface eth1.700\n no shutdown\n description [SubIf VLAN red] s2 -> s1\n ! no ip address\n!\ninterface vlan700\n no shutdown\n description VLAN red (700) -> [h1,s1,h2]\n ! no ip address\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for s2

TASK [Attempt to load VRF kernel module] ***************************************
changed: [s2 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [s2]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for s2

TASK [template] ****************************************************************
changed: [s2]

TASK [set_fact] ****************************************************************
ok: [s2]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/hogs/node_files/s2/initial] ***
changed: [s2]

TASK [run vtysh to import initial config from /work/netlab_cicd/hogs/node_files/s2/initial] ***
skipping: [s2]

PLAY [Deploy module-specific configurations] ***********************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [h1]
ok: [h2]
ok: [h3]
ok: [h4]
ok: [s2]
ok: [s1]

TASK [Deploy individual configuration modules] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h3 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h3 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h3 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h4 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h4 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h4 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1 => (item=ospf)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s2 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s2 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s2 => (item=ospf)

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [h1]

TASK [Find configuration template for vlan] ************************************
skipping: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for vlan] ********************
skipping: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy vlan configuration] ***********************************************
skipping: [h1]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [h1]

TASK [Find configuration template for routing] *********************************
skipping: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy routing configuration] ********************************************
skipping: [h1]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [h1]

TASK [Find configuration template for ospf] ************************************
skipping: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for ospf] ********************
skipping: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy ospf configuration] ***********************************************
skipping: [h1]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [h2]

TASK [Find configuration template for vlan] ************************************
skipping: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for vlan] ********************
skipping: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy vlan configuration] ***********************************************
skipping: [h2]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [h2]

TASK [Find configuration template for routing] *********************************
skipping: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy routing configuration] ********************************************
skipping: [h2]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [h2]

TASK [Find configuration template for ospf] ************************************
skipping: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for ospf] ********************
skipping: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy ospf configuration] ***********************************************
skipping: [h2]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [h3]

TASK [Find configuration template for vlan] ************************************
skipping: [h3]

TASK [fail] ********************************************************************
skipping: [h3]

TASK [Find configuration deployment deploy_script for vlan] ********************
skipping: [h3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h3]

TASK [Deploy vlan configuration] ***********************************************
skipping: [h3]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [h3]

TASK [Find configuration template for routing] *********************************
skipping: [h3]

TASK [fail] ********************************************************************
skipping: [h3]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [h3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h3]

TASK [Deploy routing configuration] ********************************************
skipping: [h3]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [h3]

TASK [Find configuration template for ospf] ************************************
skipping: [h3]

TASK [fail] ********************************************************************
skipping: [h3]

TASK [Find configuration deployment deploy_script for ospf] ********************
skipping: [h3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h3]

TASK [Deploy ospf configuration] ***********************************************
skipping: [h3]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [h4]

TASK [Find configuration template for vlan] ************************************
skipping: [h4]

TASK [fail] ********************************************************************
skipping: [h4]

TASK [Find configuration deployment deploy_script for vlan] ********************
skipping: [h4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h4]

TASK [Deploy vlan configuration] ***********************************************
skipping: [h4]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [h4]

TASK [Find configuration template for routing] *********************************
skipping: [h4]

TASK [fail] ********************************************************************
skipping: [h4]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [h4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h4]

TASK [Deploy routing configuration] ********************************************
skipping: [h4]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [h4]

TASK [Find configuration template for ospf] ************************************
skipping: [h4]

TASK [fail] ********************************************************************
skipping: [h4]

TASK [Find configuration deployment deploy_script for ospf] ********************
skipping: [h4]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h4]

TASK [Deploy ospf configuration] ***********************************************
skipping: [h4]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [s1]

TASK [Find configuration template for vlan] ************************************
ok: [s1]

TASK [fail] ********************************************************************
skipping: [s1]

TASK [Find configuration deployment deploy_script for vlan] ********************
ok: [s1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s1] => {
    "msg": "vlan configuration for s1\n=========================================\n\ninterfaces {\n\n  ge-0/0/1 {\n    encapsulation flexible-ethernet-services;\n  }\n\n  ge-0/0/1.0 {\n    encapsulation vlan-bridge;\n  }\n\n\n  ge-0/0/0 {\n    encapsulation flexible-ethernet-services;\n  }\n\n  ge-0/0/0.700 {\n    encapsulation vlan-bridge;\n  }\n\n}\n\n\nbridge-domains {\n\n  vlan-700 {\n    domain-type bridge;\n    vlan-id 700;\n    routing-interface irb.700;\n\n    interface ge-0/0/1.0;\n    interface ge-0/0/0.700;\n  }\n\n}\n"
}

TASK [Deploy vlan configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/junos.yml for s1

TASK [junos_config: deploying vlan from /work/netlab_cicd/hogs/node_files/s1/vlan] ***
changed: [s1]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [s1]

TASK [Find configuration template for routing] *********************************
skipping: [s1]

TASK [fail] ********************************************************************
skipping: [s1]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [s1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [s1]

TASK [Deploy routing configuration] ********************************************
skipping: [s1]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [s1]

TASK [Find configuration template for ospf] ************************************
ok: [s1]

TASK [fail] ********************************************************************
skipping: [s1]

TASK [Find configuration deployment deploy_script for ospf] ********************
ok: [s1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s1] => {
    "msg": "ospf configuration for s1\n=========================================\nrouting-options {\n  router-id 10.0.0.5\n}\nprotocols {\n  delete: ospf;\n}\n\nprotocols {\n  ospf {\n    area 0.0.0.0 {\n      interface lo0.0 {\n      }\n    }\n    area 0.0.0.0 {\n      interface ge-0/0/0.0 {\n        interface-type p2p;\n      }\n    }\n    area 0.0.0.0 {\n      interface ge-0/0/2.0 {\n        interface-type p2p;\n        passive;\n      }\n    }\n  }\n}\n\n"
}

TASK [Deploy ospf configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/junos.yml for s1

TASK [junos_config: deploying ospf from /work/netlab_cicd/hogs/node_files/s1/ospf] ***
[WARNING]: statement not found
changed: [s1]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [s2]

TASK [Find configuration template for vlan] ************************************
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s2]

TASK [Find configuration deployment deploy_script for vlan] ********************
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s2] => {
    "msg": "vlan configuration for s2\n=========================================\n#!/bin/bash\n#\nset -e # Exit immediately when any command fails\n#\nif [ ! -e /sys/devices/virtual/net/eth1.700 ]; then\n  ip link add link eth1 name eth1.700 type vlan id 700\n  ip link set dev eth1.700 up\nfi\nif [ ! -e /sys/devices/virtual/net/vlan700 ]; then\n  ip link add vlan700 type bridge\n  ip link set dev vlan700 address ca:f4:00:06:00:00\n\n  ip addr flush dev vlan700\nfi\n\nip link set dev eth2 master vlan700\nip link set dev eth1.700 master vlan700\n\nip link set dev vlan700 up\n"
}

TASK [Deploy vlan configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for s2

TASK [template] ****************************************************************
changed: [s2]

TASK [set_fact] ****************************************************************
ok: [s2]

TASK [run /tmp/config.sh to deploy vlan config from /work/netlab_cicd/hogs/node_files/s2/vlan] ***
changed: [s2]

TASK [run vtysh to import vlan config from /work/netlab_cicd/hogs/node_files/s2/vlan] ***
skipping: [s2]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [s2]

TASK [Find configuration template for routing] *********************************
skipping: [s2]

TASK [fail] ********************************************************************
skipping: [s2]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [s2]

TASK [Deploy routing configuration] ********************************************
skipping: [s2]

TASK [Figure out whether to deploy the module ospf on current device] **********
ok: [s2]

TASK [Find configuration template for ospf] ************************************
ok: [s2]

TASK [fail] ********************************************************************
skipping: [s2]

TASK [Find configuration deployment deploy_script for ospf] ********************
ok: [s2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [s2] => {
    "msg": "ospf configuration for s2\n=========================================\n!\n! OSPFv2 FRR configuration\n!\nrouter ospf\n ospf router-id 10.0.0.6\n timers throttle spf 10 50 500\n timers throttle lsa all 100\n timers lsa min-arrival 100\n\n\nexit\n!\ninterface lo\n! \n ip ospf area 0.0.0.0\n!\ninterface eth1\n! s2 -> s1\n ip ospf area 0.0.0.0\n ip ospf network point-to-point\n!\ninterface eth3\n! s2 -> h4\n ip ospf area 0.0.0.0\n ip ospf network point-to-point\n ip ospf passive\n!\n\n!\ndo write\n"
}

TASK [Deploy ospf configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for s2

TASK [template] ****************************************************************
changed: [s2]

TASK [set_fact] ****************************************************************
ok: [s2]

TASK [run /tmp/config.sh to deploy ospf config from /work/netlab_cicd/hogs/node_files/s2/ospf] ***
skipping: [s2]

TASK [run vtysh to import ospf config from /work/netlab_cicd/hogs/node_files/s2/ospf] ***
changed: [s2]

PLAY [Deploy custom deployment templates] **************************************
skipping: no hosts matched

PLAY RECAP *********************************************************************
h1                         : ok=15   changed=0    unreachable=0    failed=0    skipped=25   rescued=0    ignored=0   
h2                         : ok=15   changed=0    unreachable=0    failed=0    skipped=25   rescued=0    ignored=0   
h3                         : ok=15   changed=0    unreachable=0    failed=0    skipped=25   rescued=0    ignored=0   
h4                         : ok=15   changed=0    unreachable=0    failed=0    skipped=25   rescued=0    ignored=0   
s1                         : ok=38   changed=3    unreachable=0    failed=0    skipped=11   rescued=0    ignored=0   
s2                         : ok=38   changed=7    unreachable=0    failed=0    skipped=17   rescued=0    ignored=0   


Warning: The following warnings were generated during the 'netlab initial' processing
Warning: ansible: You're using Ansible version 12.x or higher; netlab might not work correctly
Results of configuration script deployments
================================================================================
h1                           OK: 2   
h2                           OK: 2   
h3                           OK: 2   
h4                           OK: 2   


The VLAN trunk between layer-3 switches has a combination
of bridged and routed VLANs. The routed VLAN is native VLAN.

If this test case does not produce a usable network, remove
the 'vlan.native_routed' device feature flag.

* h1 and h2 should be able to ping each other, but not h3 or h4
* h3 and h4 should be able to ping each other, but not h1 or h2