[WARNING]: Invalid characters were found in group names but not replaced, use -vvvv to see details [WARNING]: Could not match supplied host pattern, ignoring: unprovisioned PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [h2] ok: [s2] ok: [r1] ok: [s1] TASK [Find device readiness script] ******************************************** ok: [h1] ok: [h2] ok: [s1] ok: [s2] ok: [r1] TASK [Wait for device to become ready] ***************************************** skipping: [h1] skipping: [h2] included: /home/pipi/net101/tools/netsim/ansible/tasks/readiness-check/vjunos-router-clab.yml for s1, s2, r1 TASK [Wait for SSH server] ***************************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/readiness-check/vm-clab-ssh-check.yml for s1, s2, r1 TASK [Check if 'sshpass' is installed] ***************************************** ok: [s1 -> localhost] TASK [Check for 'timeout' command] ********************************************* ok: [s1 -> localhost] ok: [s2 -> localhost] ok: [r1 -> localhost] TASK [Execute local ssh command to check vjunos-router readiness] ************** FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check vjunos-router readiness (60 retries left). FAILED - RETRYING: [s2 -> localhost]: Execute local ssh command to check vjunos-router readiness (60 retries left). FAILED - RETRYING: [r1 -> localhost]: Execute local ssh command to check vjunos-router readiness (60 retries left). FAILED - RETRYING: [s2 -> localhost]: Execute local ssh command to check vjunos-router readiness (59 retries left). FAILED - RETRYING: [r1 -> localhost]: Execute local ssh command to check vjunos-router readiness (59 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check vjunos-router readiness (59 retries left). FAILED - RETRYING: [s2 -> localhost]: Execute local ssh command to check vjunos-router readiness (58 retries left). FAILED - RETRYING: [r1 -> localhost]: Execute local ssh command to check vjunos-router readiness (58 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check vjunos-router readiness (58 retries left). FAILED - RETRYING: [s2 -> localhost]: Execute local ssh command to check vjunos-router readiness (57 retries left). FAILED - RETRYING: [r1 -> localhost]: Execute local ssh command to check vjunos-router readiness (57 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check vjunos-router readiness (57 retries left). FAILED - RETRYING: [s2 -> localhost]: Execute local ssh command to check vjunos-router readiness (56 retries left). FAILED - RETRYING: [r1 -> localhost]: Execute local ssh command to check vjunos-router readiness (56 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check vjunos-router readiness (56 retries left). FAILED - RETRYING: [s2 -> localhost]: Execute local ssh command to check vjunos-router readiness (55 retries left). FAILED - RETRYING: [r1 -> localhost]: Execute local ssh command to check vjunos-router readiness (55 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check vjunos-router readiness (55 retries left). FAILED - RETRYING: [s2 -> localhost]: Execute local ssh command to check vjunos-router readiness (54 retries left). FAILED - RETRYING: [r1 -> localhost]: Execute local ssh command to check vjunos-router readiness (54 retries left). ok: [s1 -> localhost] ok: [s2 -> localhost] ok: [r1 -> localhost] TASK [Confirm s1 SSH server works] ********************************************* ok: [s1] => msg: Node s1 is ready. ok: [s2] => msg: Node s2 is ready. ok: [r1] => msg: Node r1 is ready. TASK [Wait for ge-0/0/0 interface] ********************************************* included: /home/pipi/net101/tools/netsim/ansible/tasks/readiness-check/vjunos-switch.yml for s1, s2, r1 TASK [Wait for ge-0/0/0 to appear] ********************************************* ok: [r1] ok: [s2] ok: [s1] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for h1, h2, s1, s2, r1 TASK [Figure out whether to deploy the module initial on current device] ******* ok: [h1] ok: [h2] ok: [s1] ok: [s2] ok: [r1] TASK [Find configuration template for initial] ********************************* ok: [h1] ok: [h2] ok: [r1] ok: [s1] ok: [s2] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [s1] skipping: [s2] skipping: [r1] TASK [Print deployed configuration when running in verbose mode] *************** ok: [h1] => msg: |- initial configuration for h1 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.16.0.1/24 dev eth1 2>/dev/null set -e ip addr add 172.16.0.1/24 dev eth1 ip link set eth1 mtu 1500 # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # echo Removing existing IPv4 routes while ip route del 172.16.0.0/16 2>/dev/null; do : ; done while ip route del 10.0.0.0/24 2>/dev/null; do : ; done while ip route del 10.1.0.0/16 2>/dev/null; do : ; done while ip route del 10.2.0.0/24 2>/dev/null; do : ; done # # echo Adding direct static routes ip route add 172.16.0.0/16 via 172.16.0.5 dev eth1 protocol static ip route add 10.0.0.0/24 via 172.16.0.5 dev eth1 protocol static ip route add 10.1.0.0/16 via 172.16.0.5 dev eth1 protocol static ip route add 10.2.0.0/24 via 172.16.0.5 dev eth1 protocol static # # Print the final routing table ip route ok: [h2] => msg: |- initial configuration for h2 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.16.1.2/24 dev eth1 2>/dev/null set -e ip addr add 172.16.1.2/24 dev eth1 ip link set eth1 mtu 1500 # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # echo Removing existing IPv4 routes while ip route del 172.16.0.0/16 2>/dev/null; do : ; done while ip route del 10.0.0.0/24 2>/dev/null; do : ; done while ip route del 10.1.0.0/16 2>/dev/null; do : ; done while ip route del 10.2.0.0/24 2>/dev/null; do : ; done # # echo Adding direct static routes ip route add 172.16.0.0/16 via 172.16.1.5 dev eth1 protocol static ip route add 10.0.0.0/24 via 172.16.1.5 dev eth1 protocol static ip route add 10.1.0.0/16 via 172.16.1.5 dev eth1 protocol static ip route add 10.2.0.0/24 via 172.16.1.5 dev eth1 protocol static # # Print the final routing table ip route ok: [r1] => msg: |- initial configuration for r1 ========================================= system { host-name r1; static-host-mapping { h1 inet 172.16.0.1; h2 inet 172.16.1.2; s1 inet 10.0.0.3; s2 inet 10.0.0.4; } } interfaces { ge-0/0/0 { mtu 1514; } ge-0/0/1 { mtu 1514; } lo0.0 { family inet { address 10.0.0.5/32; } } ge-0/0/0.0 { description "r1 -> [h1,s1,s2]"; family inet { address 172.16.0.5/24; } } ge-0/0/1.0 { description "r1 -> [h2,s1,s2]"; family inet { address 172.16.1.5/24; } } } protocols { lldp { interface fxp0 { disable; } interface all; } } ok: [s1] => msg: |- initial configuration for s1 ========================================= system { host-name s1; static-host-mapping { h1 inet 172.16.0.1; h2 inet 172.16.1.2; s2 inet 10.0.0.4; r1 inet 10.0.0.5; } } interfaces { ge-0/0/0.0 { vlan-id 1; } ge-0/0/1 { flexible-vlan-tagging; native-vlan-id 700; } ge-0/0/1.0 { vlan-id 700; } ge-0/0/2 { flexible-vlan-tagging; native-vlan-id 701; } ge-0/0/2.0 { vlan-id 701; } ge-0/0/0 { flexible-vlan-tagging; } ge-0/0/0.701 { vlan-id 701; } ge-0/0/0 { flexible-vlan-tagging; } ge-0/0/0.700 { vlan-id 700; } } interfaces { ge-0/0/0 { mtu 1522; } ge-0/0/1 { mtu 1522; } ge-0/0/2 { mtu 1522; } lo0.0 { family inet { address 10.0.0.3/32; } } ge-0/0/0.0 { description "s1 -> s2"; } ge-0/0/1.0 { description "[Access VLAN red] s1 -> h1"; } ge-0/0/2.0 { description "[Access VLAN blue] s1 -> h2"; } ge-0/0/0.701 { description "[SubIf VLAN blue] s1 -> s2"; } ge-0/0/0.700 { description "[SubIf VLAN red] s1 -> s2"; } irb.700 { description "VLAN red (700) -> [h1,s2,r1]"; } irb.701 { description "VLAN blue (701) -> [h2,s2,r1]"; } } protocols { lldp { interface fxp0 { disable; } interface all; } } ok: [s2] => msg: |- initial configuration for s2 ========================================= system { host-name s2; static-host-mapping { h1 inet 172.16.0.1; h2 inet 172.16.1.2; s1 inet 10.0.0.3; r1 inet 10.0.0.5; } } interfaces { ge-0/0/0.0 { vlan-id 1; } ge-0/0/1 { flexible-vlan-tagging; native-vlan-id 700; } ge-0/0/1.0 { vlan-id 700; } ge-0/0/2 { flexible-vlan-tagging; native-vlan-id 701; } ge-0/0/2.0 { vlan-id 701; } ge-0/0/0 { flexible-vlan-tagging; } ge-0/0/0.701 { vlan-id 701; } ge-0/0/0 { flexible-vlan-tagging; } ge-0/0/0.700 { vlan-id 700; } } interfaces { ge-0/0/0 { mtu 1522; } ge-0/0/1 { mtu 1522; } ge-0/0/2 { mtu 1522; } lo0.0 { family inet { address 10.0.0.4/32; } } ge-0/0/0.0 { description "s2 -> s1"; } ge-0/0/1.0 { description "[Access VLAN red] s2 -> r1"; } ge-0/0/2.0 { description "[Access VLAN blue] s2 -> r1"; } ge-0/0/0.701 { description "[SubIf VLAN blue] s2 -> s1"; } ge-0/0/0.700 { description "[SubIf VLAN red] s2 -> s1"; } irb.700 { description "VLAN red (700) -> [h1,s1,r1]"; } irb.701 { description "VLAN blue (701) -> [h2,s1,r1]"; } } protocols { lldp { interface fxp0 { disable; } interface all; } } TASK [Find configuration deployment deploy_script for initial] ***************** ok: [h1] ok: [h2] ok: [s1] ok: [s2] ok: [r1] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/linux-clab.yml for h1, h2 included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/junos.yml for s1, s2, r1 TASK [Define script filename and determine whether to execute in netns] ******** ok: [h1] ok: [h2] TASK [Create a temporary file for the rendered script] ************************* changed: [h1 -> localhost] changed: [h2 -> localhost] TASK [Create container setup script from /home/pipi/net101/tools/netsim/ansible/templates/initial/linux-clab.j2] *** changed: [h1 -> localhost] changed: [h2 -> localhost] TASK [Copy script into running container at /tmp/config-h1_initial.sh] ********* skipping: [h1] skipping: [h2] TASK [Execute /tmp/config-h1_initial.sh to deploy initial config based on /home/pipi/net101/tools/netsim/ansible/templates/initial/linux-clab.j2] *** skipping: [h1] skipping: [h2] TASK [Container configuration for initial based on /home/pipi/net101/tools/netsim/ansible/templates/initial/linux-clab.j2 executed in netns] *** changed: [h2 -> localhost] changed: [h1 -> localhost] TASK [Remove temporary file /tmp/h1_initial-0kptoxc7.sh] *********************** changed: [h1 -> localhost] changed: [h2 -> localhost] TASK [junos_config: deploying initial from /home/pipi/net101/tools/netsim/ansible/templates/initial/junos.j2] *** changed: [s2] changed: [s1] changed: [r1] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [s1] ok: [s2] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for s1, s2 => (item=vlan) TASK [Figure out whether to deploy the module vlan on current device] ********** ok: [s1] ok: [s2] TASK [Find configuration template for vlan] ************************************ ok: [s1] ok: [s2] TASK [fail] ******************************************************************** skipping: [s1] skipping: [s2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [s1] => msg: |- vlan configuration for s1 ========================================= interfaces { ge-0/0/1 { encapsulation flexible-ethernet-services; } ge-0/0/1.0 { encapsulation vlan-bridge; } ge-0/0/2 { encapsulation flexible-ethernet-services; } ge-0/0/2.0 { encapsulation vlan-bridge; } ge-0/0/0 { encapsulation flexible-ethernet-services; } ge-0/0/0.701 { encapsulation vlan-bridge; } ge-0/0/0 { encapsulation flexible-ethernet-services; } ge-0/0/0.700 { encapsulation vlan-bridge; } } bridge-domains { vlan-701 { domain-type bridge; vlan-id 701; routing-interface irb.701; interface ge-0/0/2.0; interface ge-0/0/0.701; } vlan-700 { domain-type bridge; vlan-id 700; routing-interface irb.700; interface ge-0/0/1.0; interface ge-0/0/0.700; } } ok: [s2] => msg: |- vlan configuration for s2 ========================================= interfaces { ge-0/0/1 { encapsulation flexible-ethernet-services; } ge-0/0/1.0 { encapsulation vlan-bridge; } ge-0/0/2 { encapsulation flexible-ethernet-services; } ge-0/0/2.0 { encapsulation vlan-bridge; } ge-0/0/0 { encapsulation flexible-ethernet-services; } ge-0/0/0.701 { encapsulation vlan-bridge; } ge-0/0/0 { encapsulation flexible-ethernet-services; } ge-0/0/0.700 { encapsulation vlan-bridge; } } bridge-domains { vlan-701 { domain-type bridge; vlan-id 701; routing-interface irb.701; interface ge-0/0/2.0; interface ge-0/0/0.701; } vlan-700 { domain-type bridge; vlan-id 700; routing-interface irb.700; interface ge-0/0/1.0; interface ge-0/0/0.700; } } TASK [Find configuration deployment deploy_script for vlan] ******************** ok: [s1] ok: [s2] TASK [Deploy vlan configuration] *********************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/junos.yml for s1, s2 TASK [junos_config: deploying vlan from /home/pipi/net101/tools/netsim/ansible/templates/vlan/vjunos-router.j2] *** changed: [s2] changed: [s1] PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* h1 : ok=13 changed=4 unreachable=0 failed=0 skipped=4 rescued=0 ignored=0 h2 : ok=13 changed=4 unreachable=0 failed=0 skipped=4 rescued=0 ignored=0 r1 : ok=16 changed=1 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 s1 : ok=25 changed=2 unreachable=0 failed=0 skipped=2 rescued=0 ignored=0 s2 : ok=24 changed=2 unreachable=0 failed=0 skipped=2 rescued=0 ignored=0 The devices under test are simple bridges with a VLAN trunk between them. An external router with two interfaces (one per VLAN) is attached to one of them. * h1 and h2 should be able to ping each other Please note it might take a while for the lab to work due to STP learning phase