[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [h2] ok: [r2] ok: [dut] TASK [Find device readiness script] ******************************************** ok: [h1] ok: [h2] ok: [r2] ok: [dut] TASK [Wait for device to become ready] ***************************************** skipping: [h1] skipping: [h2] skipping: [dut] included: /home/pipi/net101/tools/netsim/ansible/tasks/readiness-check/eos-clab.yml for r2 TASK [Wait for cEOS SSH daemon to start] *************************************** ok: [r2] TASK [Normalize config on bridge-like devices] ********************************* included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for r2, h1, h2, dut TASK [Figure out whether to deploy the module normalize on current device] ***** ok: [h1] ok: [h2] ok: [r2] ok: [dut] TASK [Find configuration template for normalize] ******************************* ok: [h1] ok: [h2] ok: [r2] ok: [dut] TASK [fail] ******************************************************************** skipping: [r2] skipping: [h1] skipping: [h2] skipping: [dut] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] ok: [r2] => msg: |- normalize configuration for r2 ========================================= ! interface Ethernet1 no switchport mac-address 52dc.cafe.0201 ! interface Ethernet2 no switchport mac-address 52dc.cafe.0202 ! interface Ethernet3 no switchport mac-address 52dc.cafe.0203 ok: [dut] => msg: |- normalize configuration for dut ========================================= ! interface GigabitEthernet0/1 no switchport mac-address 52dc.cafe.0101 ! interface GigabitEthernet0/2 no switchport mac-address 52dc.cafe.0102 TASK [Find configuration deployment deploy_script for normalize] *************** skipping: [h1] skipping: [h2] ok: [r2] ok: [dut] TASK [Deploy normalize configuration] ****************************************** skipping: [h1] skipping: [h2] included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for r2 included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/ios.yml for dut TASK [eos_config: deploying normalize from /home/pipi/net101/tools/netsim/ansible/templates/normalize/eos.j2] *** [WARNING]: To ensure idempotency and correct diff the input configuration lines should be similar to how they appear if present in the running configuration on device including the indentation changed: [r2] TASK [ios_config: deploying normalize from /home/pipi/net101/tools/netsim/ansible/templates/normalize/iosvl2.j2] *** changed: [dut] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for r2, h1, h2, dut TASK [Figure out whether to deploy the module initial on current device] ******* ok: [h1] ok: [h2] ok: [r2] ok: [dut] TASK [Find configuration template for initial] ********************************* ok: [h1] ok: [h2] ok: [r2] ok: [dut] TASK [fail] ******************************************************************** skipping: [r2] skipping: [h1] skipping: [h2] skipping: [dut] TASK [Print deployed configuration when running in verbose mode] *************** ok: [h1] => msg: |- initial configuration for h1 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.16.33.3/24 dev eth1 2>/dev/null set -e ip addr add 172.16.33.3/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=0 set +e ip -6 addr del 2001:db8:cafe:33::3/64 dev eth1 2>/dev/null set -e ip -6 addr add 2001:db8:cafe:33::3/64 dev eth1 ip link set dev eth1 mtu 1500 # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # echo Removing existing IPv4 routes while ip route del 172.16.44.0/24 2>/dev/null; do : ; done # set +e echo Removing existing IPv6 routes while ip route del 2001:db8:cafe:44::/64 2>/dev/null; do : ; done # echo Adding direct static routes ip route add 172.16.44.0/24 via 172.16.33.42 dev eth1 protocol static ip route add 2001:db8:cafe:44::/64 via 2001:db8:cafe:33::2a dev eth1 protocol static # # Print the final routing table ip route ok: [h2] => msg: |- initial configuration for h2 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.16.44.4/24 dev eth1 2>/dev/null set -e ip addr add 172.16.44.4/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=0 set +e ip -6 addr del 2001:db8:cafe:44::4/64 dev eth1 2>/dev/null set -e ip -6 addr add 2001:db8:cafe:44::4/64 dev eth1 ip link set dev eth1 mtu 1500 # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # echo Removing existing IPv4 routes while ip route del 172.16.33.0/24 2>/dev/null; do : ; done # set +e echo Removing existing IPv6 routes while ip route del 2001:db8:cafe:33::/64 2>/dev/null; do : ; done # echo Adding direct static routes ip route add 172.16.33.0/24 via 172.16.44.1 dev eth1 protocol static ip route add 2001:db8:cafe:33::/64 via 2001:db8:cafe:44::1 dev eth1 protocol static # # Print the final routing table ip route ok: [r2] => msg: |- initial configuration for r2 ========================================= hostname r2 ! logging monitor debugging aaa authorization exec default local ! lldp run ip routing ipv6 unicast-routing ! ! ip host dut 10.0.0.1 172.16.44.1 172.16.33.1 ip host h1 172.16.33.3 ip host h2 172.16.44.4 ipv6 host dut 2001:db8:cafe:44::1 ipv6 host h1 2001:db8:cafe:33::3 ipv6 host h2 2001:db8:cafe:44::4 ! interface Management0 no lldp transmit no lldp receive ! interface Loopback0 ip address 10.0.0.2/32 ! interface Ethernet1 no switchport description r2 -> dut ! mac-address 52dc.cafe.0201 no shutdown ! interface Ethernet2 no switchport description r2 -> [dut,h2] ip address 172.16.44.2/24 ipv6 nd ra interval 5 ipv6 address 2001:db8:cafe:44::2/64 ! mac-address 52dc.cafe.0202 no shutdown ! interface Ethernet3 no switchport description [Access VLAN access] r2 -> h1 ! mac-address 52dc.cafe.0203 no shutdown ! interface Vlan1000 description VLAN access (1000) -> [dut,h1] ip address 172.16.33.2/24 ipv6 nd ra interval 5 ipv6 address 2001:db8:cafe:33::2/64 ! ok: [dut] => msg: |- initial configuration for dut ========================================= hostname dut ! no ip domain lookup ! lldp run ! ip host h1 172.16.33.3 ip host h2 172.16.44.4 ip host r2 10.0.0.2 172.16.44.2 172.16.33.2 ! ip routing ! ipv6 unicast-routing ! vlan 1000 name access ! ! ! interface Loopback0 ip address 10.0.0.1 255.255.255.255 ! interface GigabitEthernet0/0 no lldp transmit no lldp receive ! interface GigabitEthernet0/1 no switchport description dut -> r2 no shutdown ! interface GigabitEthernet0/2 no switchport description dut -> [r2,h2] ip address 172.16.44.1 255.255.255.0 ipv6 address 2001:DB8:CAFE:44::1/64 no shutdown ! interface Vlan1000 description VLAN access (1000) -> [r2,h1] ip address 172.16.33.1 255.255.255.0 ipv6 address 2001:DB8:CAFE:33::1/64 mac-address 4001.cafe.0100 no shutdown ! ! line vty 0 4 exec-timeout 0 0 ! no banner exec no banner login no banner incoming TASK [Find configuration deployment deploy_script for initial] ***************** ok: [h1] ok: [h2] ok: [r2] ok: [dut] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for r2 included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/linux-clab.yml for h1, h2 included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/ios.yml for dut TASK [eos_config: deploying initial from /home/pipi/net101/tools/netsim/ansible/templates/initial/eos.j2] *** changed: [r2] TASK [Define script filename and determine whether to execute in netns] ******** ok: [h1] ok: [h2] TASK [Create a temporary file for the rendered script] ************************* changed: [h1 -> localhost] changed: [h2 -> localhost] TASK [Create container setup script from /home/pipi/net101/tools/netsim/ansible/templates/initial/linux-clab.j2] *** changed: [h1 -> localhost] changed: [h2 -> localhost] TASK [Copy script into running container at /tmp/config-h1_initial.sh] ********* skipping: [h1] skipping: [h2] TASK [Execute /tmp/config-h1_initial.sh to deploy initial config based on /home/pipi/net101/tools/netsim/ansible/templates/initial/linux-clab.j2] *** skipping: [h1] skipping: [h2] TASK [Container configuration for initial based on /home/pipi/net101/tools/netsim/ansible/templates/initial/linux-clab.j2 executed in netns] *** changed: [h2 -> localhost] changed: [h1 -> localhost] TASK [Remove temporary file /tmp/h1_initial-kd_2hp3a.sh] *********************** changed: [h2 -> localhost] changed: [h1 -> localhost] TASK [ios_config: deploying initial from /home/pipi/net101/tools/netsim/ansible/templates/initial/ios.j2] *** changed: [dut] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [h2] ok: [dut] ok: [r2] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, h1, h2, r2 => (item=routing) included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, h1, h2, r2 => (item=vlan) included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, h1, h2, r2 => (item=gateway) TASK [Figure out whether to deploy the module routing on current device] ******* ok: [h1] ok: [h2] ok: [dut] ok: [r2] TASK [Find configuration template for routing] ********************************* skipping: [dut] skipping: [r2] ok: [h1] ok: [h2] TASK [fail] ******************************************************************** skipping: [dut] skipping: [h1] skipping: [h2] skipping: [r2] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [dut] skipping: [r2] ok: [h1] => msg: |- routing configuration for h1 ========================================= #!/bin/bash # echo "Static routes are configured as part of the initial configuration template" echo # ip route ok: [h2] => msg: |- routing configuration for h2 ========================================= #!/bin/bash # echo "Static routes are configured as part of the initial configuration template" echo # ip route TASK [Find configuration deployment deploy_script for routing] ***************** skipping: [dut] skipping: [r2] ok: [h1] ok: [h2] TASK [Deploy routing configuration] ******************************************** skipping: [dut] skipping: [r2] included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/linux-clab.yml for h1, h2 TASK [Define script filename and determine whether to execute in netns] ******** ok: [h1] ok: [h2] TASK [Create a temporary file for the rendered script] ************************* changed: [h1 -> localhost] changed: [h2 -> localhost] TASK [Create container setup script from /home/pipi/net101/tools/netsim/ansible/templates/routing/linux.j2] *** changed: [h1 -> localhost] changed: [h2 -> localhost] TASK [Copy script into running container at /tmp/config-h1_routing.sh] ********* changed: [h2 -> localhost] changed: [h1 -> localhost] TASK [Execute /tmp/config-h1_routing.sh to deploy routing config based on /home/pipi/net101/tools/netsim/ansible/templates/routing/linux.j2] *** changed: [h1] changed: [h2] TASK [Container configuration for routing based on /home/pipi/net101/tools/netsim/ansible/templates/routing/linux.j2 executed in netns] *** skipping: [h1] skipping: [h2] TASK [Remove temporary file /tmp/h1_routing-3s9evxmi.sh] *********************** changed: [h1 -> localhost] changed: [h2 -> localhost] TASK [Figure out whether to deploy the module vlan on current device] ********** ok: [h1] ok: [h2] ok: [dut] ok: [r2] TASK [Find configuration template for vlan] ************************************ skipping: [h1] skipping: [h2] ok: [dut] ok: [r2] TASK [fail] ******************************************************************** skipping: [dut] skipping: [h1] skipping: [h2] skipping: [r2] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] ok: [dut] => msg: |- vlan configuration for dut ========================================= vlan 1000 name access ! ! interface GigabitEthernet0/1 switchport switchport trunk encapsulation dot1q switchport mode trunk switchport trunk allowed vlan 1000 ok: [r2] => msg: |- vlan configuration for r2 ========================================= vlan 1000 name access ! ! interface Ethernet1 switchport switchport mode trunk switchport trunk allowed vlan 1000 ! interface Ethernet3 switchport switchport access vlan 1000 ! interface Vlan1000 TASK [Find configuration deployment deploy_script for vlan] ******************** skipping: [h1] skipping: [h2] ok: [dut] ok: [r2] TASK [Deploy vlan configuration] *********************************************** skipping: [h1] skipping: [h2] included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/ios.yml for dut included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for r2 TASK [ios_config: deploying vlan from /home/pipi/net101/tools/netsim/ansible/templates/vlan/iosvl2.j2] *** changed: [dut] TASK [eos_config: deploying vlan from /home/pipi/net101/tools/netsim/ansible/templates/vlan/eos.j2] *** changed: [r2] TASK [Figure out whether to deploy the module gateway on current device] ******* ok: [h1] ok: [h2] ok: [dut] ok: [r2] TASK [Find configuration template for gateway] ********************************* skipping: [h1] skipping: [h2] ok: [dut] ok: [r2] TASK [fail] ******************************************************************** skipping: [dut] skipping: [h1] skipping: [h2] skipping: [r2] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] ok: [dut] => msg: |- gateway configuration for dut ========================================= fhrp version vrrp v3 ! interface Vlan1000 vrrp 217 address-family ipv4 address 172.16.33.42 priority 30 preempt vrrp 217 address-family ipv6 address fe80::200:5eff:fe00:02d9 primary address 2001:db8:cafe:33::2a/64 priority 30 preempt ok: [r2] => msg: |- gateway configuration for r2 ========================================= no ip icmp redirect ! interface Vlan1000 vrrp 217 ipv4 version 3 vrrp 217 ipv4 checksum pseudo-header exclude vrrp 217 ipv4 172.16.33.42 vrrp 217 ipv6 2001:db8:cafe:33::2a vrrp 217 priority-level 20 vrrp 217 preempt TASK [Find configuration deployment deploy_script for gateway] ***************** skipping: [h1] skipping: [h2] ok: [dut] ok: [r2] TASK [Deploy gateway configuration] ******************************************** skipping: [h1] skipping: [h2] included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/ios.yml for dut included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for r2 TASK [ios_config: deploying gateway from /home/pipi/net101/tools/netsim/ansible/templates/gateway/ios.j2] *** changed: [dut] TASK [eos_config: deploying gateway from /home/pipi/net101/tools/netsim/ansible/templates/gateway/eos.j2] *** changed: [r2] PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* dut : ok=33 changed=4 unreachable=0 failed=0 skipped=10 rescued=0 ignored=0 h1 : ok=33 changed=9 unreachable=0 failed=0 skipped=20 rescued=0 ignored=0 h2 : ok=33 changed=9 unreachable=0 failed=0 skipped=20 rescued=0 ignored=0 r2 : ok=35 changed=4 unreachable=0 failed=0 skipped=9 rescued=0 ignored=0 This lab tests IPv4/6 VRRP configuration on an access VLAN. It checks whether the device-under-test (DUT) forwards traffic sent to the VRRP IP/MAC address, whether it has correct VRRP priority, and whether the preemption mechanism works.