[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [server] ok: [c1] ok: [c2] ok: [relay] TASK [Find device readiness script] ******************************************** ok: [server] ok: [c1] ok: [c2] ok: [relay] TASK [Wait for device to become ready] ***************************************** skipping: [c1] skipping: [c2] skipping: [server] included: /home/pipi/net101/tools/netsim/ansible/tasks/readiness-check/eos-clab.yml for relay TASK [Wait for cEOS SSH daemon to start] *************************************** ok: [relay] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for c1, c2, server, relay TASK [Figure out whether to deploy the module initial on current device] ******* ok: [server] ok: [c1] ok: [c2] ok: [relay] TASK [Find configuration template for initial] ********************************* ok: [server] ok: [c1] ok: [c2] ok: [relay] TASK [Print deployed configuration when running in verbose mode] *************** ok: [server] => msg: |- initial configuration for server ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing # ip link set dev eth1 up sysctl -w net.ipv6.conf.eth1.disable_ipv6=0 set +e ip -6 addr del 2001:db8:cafe:1::4/64 dev eth1 2>/dev/null set -e ip -6 addr add 2001:db8:cafe:1::4/64 dev eth1 ip link set eth1 mtu 1500 # # Add routes to IPv4 address pools pointing to the first neighbor on the first link # # If you need anything better, use FRR instead of Linux and start routing (or use IPv6) # # # Print the final routing table ip route ok: [c1] => msg: |- initial configuration for c1 ========================================= hostname c1 ! no ip domain lookup ! lldp run ! ip host c2 10.0.0.3 ip host relay 10.0.0.1 ! ip routing ! ipv6 unicast-routing ! ! interface Loopback0 ip address 10.0.0.2 255.255.255.255 ! interface GigabitEthernet0/0 no lldp transmit no lldp receive ! interface GigabitEthernet0/1 no shutdown no switchport description c1 -> [c2,relay] ! no banner exec no banner login no banner incoming ok: [c2] => msg: |- initial configuration for c2 ========================================= hostname c2 ! no ip domain lookup ! lldp run ! ip host c1 10.0.0.2 ip host relay 10.0.0.1 ! ip routing ! ipv6 unicast-routing ! ! interface Loopback0 ip address 10.0.0.3 255.255.255.255 ! interface GigabitEthernet0/0 no lldp transmit no lldp receive ! interface GigabitEthernet0/1 no shutdown no switchport description c2 -> [c1,relay] ! no banner exec no banner login no banner incoming ok: [relay] => msg: |- initial configuration for relay ========================================= hostname relay ! logging monitor debugging ! lldp run ip routing ipv6 unicast-routing ! ! ip host c1 10.0.0.2 ip host c2 10.0.0.3 ipv6 host server 2001:db8:cafe:1::4 ! interface Management0 no lldp transmit no lldp receive ! interface Loopback0 no shutdown ip address 10.0.0.1/32 ! interface Ethernet1 no shutdown no switchport description relay -> [c1,c2] ipv6 nd ra interval 5 ipv6 address 2001:db8:cafe::1/64 ! mac-address 52dc.cafe.0101 ! interface Ethernet2 no shutdown no switchport description relay -> server ipv6 nd ra interval 5 ipv6 address 2001:db8:cafe:1::1/64 ! mac-address 52dc.cafe.0102 ! TASK [Find configuration deployment deploy_script for initial] ***************** ok: [server] ok: [c1] ok: [c2] ok: [relay] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/ios.yml for c1, c2 included: /home/pipi/net101/tools/netsim/ansible/tasks/linux/initial-clab.yml for server included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for relay TASK [ios_config: deploying initial from /home/pipi/net101/tools/netsim/ansible/templates/initial/ios.j2] *** [WARNING]: To ensure idempotency and correct diff the input configuration lines should be similar to how they appear if present in the running configuration on device including the indentation changed: [c2] changed: [c1] TASK [set_fact] **************************************************************** ok: [server] TASK [Create initial container setup from /home/pipi/net101/tools/netsim/ansible/templates/initial/linux-clab.j2] *** changed: [server -> localhost] TASK [Initial container configuration via /tmp/config-lhFHEzvI-server.sh] ****** changed: [server -> localhost] TASK [file] ******************************************************************** changed: [server -> localhost] TASK [eos_config: deploying initial from /home/pipi/net101/tools/netsim/ansible/templates/initial/eos.j2] *** changed: [relay] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [server] ok: [c1] ok: [c2] ok: [relay] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for c1, c2, relay, server => (item=dhcp) included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for c1, c2, relay, server => (item=ospf) TASK [Figure out whether to deploy the module dhcp on current device] ********** ok: [server] ok: [c1] ok: [c2] ok: [relay] TASK [Find configuration template for dhcp] ************************************ skipping: [server] ok: [c1] ok: [c2] ok: [relay] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [server] ok: [c1] => msg: |- dhcp configuration for c1 ========================================= interface GigabitEthernet0/1 ipv6 enable ipv6 address dhcp ok: [c2] => msg: |- dhcp configuration for c2 ========================================= interface GigabitEthernet0/1 ipv6 enable ipv6 address dhcp ok: [relay] => msg: |- dhcp configuration for relay ========================================= interface Ethernet1 ipv6 dhcp relay destination 2001:db8:cafe:1::4 TASK [Find configuration deployment deploy_script for dhcp] ******************** skipping: [server] ok: [c1] ok: [c2] ok: [relay] TASK [Deploy dhcp configuration] *********************************************** skipping: [server] included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/ios.yml for c1, c2 included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for relay TASK [ios_config: deploying dhcp from /home/pipi/net101/tools/netsim/ansible/templates/dhcp/ios.j2] *** changed: [c2] changed: [c1] TASK [eos_config: deploying dhcp from /home/pipi/net101/tools/netsim/ansible/templates/dhcp/eos.j2] *** changed: [relay] TASK [Figure out whether to deploy the module ospf on current device] ********** ok: [server] ok: [c1] ok: [c2] ok: [relay] TASK [Find configuration template for ospf] ************************************ skipping: [server] ok: [c1] ok: [c2] ok: [relay] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [server] ok: [c1] => msg: |- ospf configuration for c1 ========================================= router ospf 1 router-id 10.0.0.2 ! interface Loopback0 ! ip ospf 1 area 0.0.0.0 ! router ospfv3 1 router-id 10.0.0.2 address-family ipv6 unicast ! interface GigabitEthernet0/1 ! c1 -> [c2,relay] ospfv3 1 ipv6 area 0.0.0.0 ! ok: [c2] => msg: |- ospf configuration for c2 ========================================= router ospf 1 router-id 10.0.0.3 ! interface Loopback0 ! ip ospf 1 area 0.0.0.0 ! router ospfv3 1 router-id 10.0.0.3 address-family ipv6 unicast ! interface GigabitEthernet0/1 ! c2 -> [c1,relay] ospfv3 1 ipv6 area 0.0.0.0 ! ok: [relay] => msg: |- ospf configuration for relay ========================================= ! ! OSPFv2 configuration ! router ospf 1 router-id 10.0.0.1 interface unnumbered hello mask tx 0.0.0.0 timers spf delay initial 100 200 500 timers lsa rx min interval 100 timers lsa tx delay initial 100 200 500 ! interface Loopback0 ! ip ospf area 0.0.0.0 ! ! ! OSPFv3 configuration ! interface Ethernet1 ! relay -> [c1,c2] ipv6 ospf 1 area 0.0.0.0 ! interface Ethernet2 ! relay -> server ipv6 ospf 1 area 0.0.0.0 ipv6 ospf network point-to-point ! ! ipv6 router ospf 1 router-id 10.0.0.1 timers spf delay initial 100 200 500 timers lsa rx min interval 100 timers lsa tx delay initial 100 200 500 TASK [Find configuration deployment deploy_script for ospf] ******************** skipping: [server] ok: [c1] ok: [c2] ok: [relay] TASK [Deploy ospf configuration] *********************************************** skipping: [server] included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/ios.yml for c1, c2 included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for relay TASK [ios_config: deploying ospf from /home/pipi/net101/tools/netsim/ansible/templates/ospf/ios.j2] *** changed: [c2] changed: [c1] TASK [eos_config: deploying ospf from /home/pipi/net101/tools/netsim/ansible/templates/ospf/eos.j2] *** changed: [relay] PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* c1 : ok=24 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 c2 : ok=24 changed=3 unreachable=0 failed=0 skipped=1 rescued=0 ignored=0 relay : ok=26 changed=3 unreachable=0 failed=0 skipped=0 rescued=0 ignored=0 server : ok=17 changed=3 unreachable=0 failed=0 skipped=9 rescued=0 ignored=0 Use this topology to test the OSPF over interfaces using dynamic DHCPv6 addresses. Use 'netlab validate' to check whether your devices acquired dynamic IPv6 addresses and whether they established OSPFv3 adjacency with the DHCP relay.