[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned

PLAY [Deploy initial device configuration] *************************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [x1]
ok: [x2]
ok: [x3]
ok: [dut]

TASK [Find device readiness script] ********************************************
ok: [x1]
ok: [x3]
ok: [x2]
ok: [dut]

TASK [Wait for device to become ready] *****************************************
skipping: [x1]
skipping: [x2]
skipping: [x3]
included: /home/pipi/net101/tools/netsim/ansible/tasks/readiness-check/eos-clab.yml for dut

TASK [Wait for cEOS SSH daemon to start] ***************************************
ok: [dut]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, x1, x2, x3

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [x1]
ok: [x2]
ok: [x3]
ok: [dut]

TASK [Find configuration template for initial] *********************************
ok: [x1]
ok: [x2]
ok: [x3]
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [x1] => 
  msg: |-
    initial configuration for x1
    =========================================
    #!/bin/bash
    #
    set -e
    set -x
    #
    # Create bash profile script
    #
    cat <<SCRIPT >/root/.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)#"
    echo "Use vtysh to connect to FRR daemon"
    echo
    SCRIPT
    #
    # Get the current next hop for the default route
    #
    def_nh=$(ip route list default|awk '{ print $3 }')
    #
    # Create the management VRF and add eth0 to it
    #
    if [ ! -e /sys/devices/virtual/net/mgmt ]; then
      ip link add mgmt type vrf table 42
    fi
    ip link set mgmt up
    sysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1
    ip link set eth0 master mgmt
    #
    # Reinstall the default route if we had it before
    #
    if [[ -n "$def_nh" ]]; then
      ip route add 0.0.0.0/0 vrf mgmt via $def_nh
    fi
    #
    # Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)
    #
  
    #
    # Create loopbacks and stub devices
    #
    if [ ! -e /sys/class/net/lo ]; then
      if [ ! -e /sys/devices/virtual/net/lo ]; then
        ip link add lo type dummy
        ip link set dev lo up
      fi
    fi
    if [ ! -e /sys/class/net/eth2 ]; then
      if [ ! -e /sys/devices/virtual/net/eth2 ]; then
        ip link add eth2 type dummy
        ip link set dev eth2 up
      fi
    fi
  
    # Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)
    #
    sysctl -qw net.ipv6.conf.eth1.autoconf=0
    sysctl -qw net.ipv6.conf.eth1.accept_ra=0
    ip link set eth1 down
    ip link set eth1 up
    sysctl -qw net.ipv6.conf.eth2.autoconf=0
    sysctl -qw net.ipv6.conf.eth2.accept_ra=0
    ip link set eth2 down
    ip link set eth2 up
  
    #
    # Add vtysh.conf file
    echo "service integrated-vtysh-config" >/etc/frr/vtysh.conf
    #
    # Set Ethernet interface MTU
    ip link set eth1 mtu 1500
    ip link set eth2 mtu 1500
    #
    # Rest of initial configuration done through VTYSH
    #
    cat >/tmp/config <<CONFIG
    hostname x1
    !
    vrf mgmt
     exit-vrf
    !
    ipv6 forwarding
    frr defaults datacenter
    !
    interface lo
     no shutdown
     ip address 10.0.0.2/32
     ipv6 address 2001:db8:1:2::1/64
    !
    interface eth1
     no shutdown
     description x1 -> dut [external]
     ip address 10.1.0.2/30
     ipv6 address 2001:db8:3::2/64
     ipv6 nd ra-interval 5
     no ipv6 nd suppress-ra
    !
    interface eth2
     no shutdown
     description x1 -> stub [stub]
     ! no ip address
     ipv6 address 2001:db8:dead:beef::2/64
     ipv6 nd ra-interval 5
     no ipv6 nd suppress-ra
    !
    do write
    CONFIG
    vtysh -f /tmp/config
    exit 0
ok: [x2] => 
  msg: |-
    initial configuration for x2
    =========================================
    #!/bin/bash
    #
    set -e
    set -x
    #
    # Create bash profile script
    #
    cat <<SCRIPT >/root/.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)#"
    echo "Use vtysh to connect to FRR daemon"
    echo
    SCRIPT
    #
    # Get the current next hop for the default route
    #
    def_nh=$(ip route list default|awk '{ print $3 }')
    #
    # Create the management VRF and add eth0 to it
    #
    if [ ! -e /sys/devices/virtual/net/mgmt ]; then
      ip link add mgmt type vrf table 42
    fi
    ip link set mgmt up
    sysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1
    ip link set eth0 master mgmt
    #
    # Reinstall the default route if we had it before
    #
    if [[ -n "$def_nh" ]]; then
      ip route add 0.0.0.0/0 vrf mgmt via $def_nh
    fi
    #
    # Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)
    #
  
    #
    # Create loopbacks and stub devices
    #
    if [ ! -e /sys/class/net/lo ]; then
      if [ ! -e /sys/devices/virtual/net/lo ]; then
        ip link add lo type dummy
        ip link set dev lo up
      fi
    fi
  
    # Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)
    #
    sysctl -qw net.ipv6.conf.eth1.autoconf=0
    sysctl -qw net.ipv6.conf.eth1.accept_ra=0
    ip link set eth1 down
    ip link set eth1 up
  
    #
    # Add vtysh.conf file
    echo "service integrated-vtysh-config" >/etc/frr/vtysh.conf
    #
    # Set Ethernet interface MTU
    ip link set eth1 mtu 1500
    #
    # Rest of initial configuration done through VTYSH
    #
    cat >/tmp/config <<CONFIG
    hostname x2
    !
    vrf mgmt
     exit-vrf
    !
    ipv6 forwarding
    frr defaults datacenter
    !
    interface lo
     no shutdown
     ip address 10.0.0.3/32
     ipv6 address 2001:db8:1:3::1/64
    !
    interface eth1
     no shutdown
     description x2 -> dut [external]
     ip address 10.1.0.6/30
     ipv6 address 2001:db8:3:1::2/64
     ipv6 nd ra-interval 5
     no ipv6 nd suppress-ra
    !
    do write
    CONFIG
    vtysh -f /tmp/config
    exit 0
ok: [x3] => 
  msg: |-
    initial configuration for x3
    =========================================
    #!/bin/bash
    #
    set -e
    set -x
    #
    # Create bash profile script
    #
    cat <<SCRIPT >/root/.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)#"
    echo "Use vtysh to connect to FRR daemon"
    echo
    SCRIPT
    #
    # Get the current next hop for the default route
    #
    def_nh=$(ip route list default|awk '{ print $3 }')
    #
    # Create the management VRF and add eth0 to it
    #
    if [ ! -e /sys/devices/virtual/net/mgmt ]; then
      ip link add mgmt type vrf table 42
    fi
    ip link set mgmt up
    sysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1
    ip link set eth0 master mgmt
    #
    # Reinstall the default route if we had it before
    #
    if [[ -n "$def_nh" ]]; then
      ip route add 0.0.0.0/0 vrf mgmt via $def_nh
    fi
    #
    # Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)
    #
  
    #
    # Create loopbacks and stub devices
    #
    if [ ! -e /sys/class/net/lo ]; then
      if [ ! -e /sys/devices/virtual/net/lo ]; then
        ip link add lo type dummy
        ip link set dev lo up
      fi
    fi
  
    # Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)
    #
    sysctl -qw net.ipv6.conf.eth1.autoconf=0
    sysctl -qw net.ipv6.conf.eth1.accept_ra=0
    ip link set eth1 down
    ip link set eth1 up
  
    #
    # Add vtysh.conf file
    echo "service integrated-vtysh-config" >/etc/frr/vtysh.conf
    #
    # Set Ethernet interface MTU
    ip link set eth1 mtu 1500
    #
    # Rest of initial configuration done through VTYSH
    #
    cat >/tmp/config <<CONFIG
    hostname x3
    !
    vrf mgmt
     exit-vrf
    !
    ipv6 forwarding
    frr defaults datacenter
    !
    interface lo
     no shutdown
     ip address 10.0.0.4/32
     ipv6 address 2001:db8:1:4::1/64
    !
    interface eth1
     no shutdown
     description x3 -> dut [external]
     ip address 10.1.0.10/30
     ipv6 address 2001:db8:3:2::2/64
     ipv6 nd ra-interval 5
     no ipv6 nd suppress-ra
    !
    do write
    CONFIG
    vtysh -f /tmp/config
    exit 0
ok: [dut] => 
  msg: |-
    initial configuration for dut
    =========================================
    hostname dut
    !
    logging monitor debugging
    aaa authorization exec default local
    !
    lldp run
    ip routing
    ipv6 unicast-routing
    !
    !
    ip host x1 10.0.0.2 10.1.0.2
    ip host x2 10.0.0.3 10.1.0.6
    ip host x3 10.0.0.4 10.1.0.10
    ipv6 host x1 2001:db8:1:2::1
    ipv6 host x2 2001:db8:1:3::1
    ipv6 host x3 2001:db8:1:4::1
    !
    interface Management0
     no lldp transmit
     no lldp receive
    !
    interface Loopback0
     no shutdown
     ip address 10.0.0.1/32
     ipv6 nd ra interval 5
     ipv6 address 2001:db8:1:1::1/64
    !
    interface Ethernet1
     no shutdown
     no switchport
     description dut -> x1 [external]
     ip address 10.1.0.1/30
     ipv6 nd ra interval 5
     ipv6 address 2001:db8:3::1/64
    !
     mac-address 52dc.cafe.0101
    !
    interface Ethernet2
     no shutdown
     no switchport
     description dut -> x2 [external]
     ip address 10.1.0.5/30
     ipv6 nd ra interval 5
     ipv6 address 2001:db8:3:1::1/64
    !
     mac-address 52dc.cafe.0102
    !
    interface Ethernet3
     no shutdown
     no switchport
     description dut -> x3 [external]
     ip address 10.1.0.9/30
     ipv6 nd ra interval 5
     ipv6 address 2001:db8:3:2::1/64
    !
     mac-address 52dc.cafe.0103
    !

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [x1]
ok: [x2]
ok: [x3]
ok: [dut]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for dut
included: /home/pipi/net101/tools/netsim/ansible/tasks/frr/initial-clab.yml for x1, x2, x3

TASK [eos_config: deploying initial from /home/pipi/net101/tools/netsim/ansible/templates/initial/eos.j2] ***
[WARNING]: To ensure idempotency and correct diff the input configuration lines
should be similar to how they appear if present in the running configuration on
device including the indentation
changed: [dut]

TASK [Attempt to load VRF kernel module] ***************************************
changed: [x3 -> localhost]
changed: [x2 -> localhost]
changed: [x1 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [x1]
skipping: [x2]
skipping: [x3]

TASK [include_tasks] ***********************************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/frr/deploy-config.yml for x1, x2, x3

TASK [template] ****************************************************************
changed: [x3]
changed: [x2]
changed: [x1]

TASK [set_fact] ****************************************************************
ok: [x1]
ok: [x2]
ok: [x3]

TASK [run /tmp/config.sh to deploy initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/frr.j2] ***
changed: [x3]
changed: [x2]
changed: [x1]

TASK [run vtysh to import initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/frr.j2] ***
skipping: [x1]
skipping: [x2]
skipping: [x3]

PLAY [Deploy module-specific configurations] ***********************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [x1]
ok: [x2]
ok: [x3]
ok: [dut]

TASK [Deploy individual configuration modules] *********************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, x1, x2, x3 => (item=routing)
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, x1, x2, x3 => (item=bgp)

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [x1]
ok: [x2]
ok: [x3]
ok: [dut]

TASK [Find configuration template for routing] *********************************
ok: [x1]
ok: [x2]
ok: [x3]
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [x1] => 
  msg: |-
    routing configuration for x1
    =========================================
    !
ok: [x2] => 
  msg: |-
    routing configuration for x2
    =========================================
    !
ok: [x3] => 
  msg: |-
    routing configuration for x3
    =========================================
    !
ok: [dut] => 
  msg: |-
    routing configuration for dut
    =========================================
    !
    !
    route-map in_x1-ipv4 deny 10
      match ip address prefix-list orig_1-ipv4
    !
    route-map in_x1-ipv4 permit 20
    !
    route-map in_x1-ipv6 deny 10
      match ipv6 address prefix-list orig_1-ipv6
    !
    route-map in_x1-ipv6 permit 20
    !
    route-map out_x2-ipv4 permit 10
      match ip address prefix-list lb_only-ipv4
    !
    route-map out_x2-ipv6 permit 10
      match ipv6 address prefix-list lb_only-ipv6
    !
    ! IPv4 prefix lists
    !
    !
    ip prefix-list lb_only-ipv4 seq 10 permit 10.0.0.0/24 ge 32 le 32
    !
    ip prefix-list orig_1-ipv4 seq 10 permit 172.42.42.0/24
    !
    ! IPv6 prefix lists
    !
    !
    ipv6 prefix-list lb_only-ipv6
      seq 10 permit 2001:db8:1::/48 ge 64 le 64
    !
    ipv6 prefix-list orig_1-ipv6
      seq 10 deny ::/0
    !
    ! AS-path access lists
    !

TASK [Find configuration deployment deploy_script for routing] *****************
ok: [x1]
ok: [x2]
ok: [x3]
ok: [dut]

TASK [Deploy routing configuration] ********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for dut
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/frr.yml for x1, x2, x3

TASK [eos_config: deploying routing from /home/pipi/net101/tools/netsim/ansible/templates/routing/eos.j2] ***
changed: [dut]

TASK [template] ****************************************************************
changed: [x3]
changed: [x1]
changed: [x2]

TASK [set_fact] ****************************************************************
ok: [x1]
ok: [x2]
ok: [x3]

TASK [run /tmp/config.sh to deploy routing config from /home/pipi/net101/tools/netsim/ansible/templates/routing/frr.j2] ***
skipping: [x1]
skipping: [x2]
skipping: [x3]

TASK [run vtysh to import routing config from /home/pipi/net101/tools/netsim/ansible/templates/routing/frr.j2] ***
changed: [x1]
changed: [x2]
changed: [x3]

TASK [Figure out whether to deploy the module bgp on current device] ***********
ok: [x1]
ok: [x2]
ok: [x3]
ok: [dut]

TASK [Find configuration template for bgp] *************************************
ok: [x1]
ok: [x2]
ok: [x3]
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [x1] => 
  msg: |-
    bgp configuration for x1
    =========================================
    !
    router bgp 65100
      no bgp ebgp-requires-policy
      no bgp default ipv4-unicast
      bgp default show-hostname
      bgp default show-nexthop-hostname
  
      ! Consider AS paths of same length but with different AS as ECMP candidates
      bgp bestpath as-path multipath-relax
  
      bgp router-id 10.0.0.2
    !
      neighbor 10.1.0.1 remote-as 65000
      neighbor 10.1.0.1 description dut
    !
      neighbor 2001:db8:3::1 remote-as 65000
      neighbor 2001:db8:3::1 description dut
    !
     address-family ipv4 unicast
    !
  
    !
      network 10.0.0.2/32
    !
    !
      network 172.42.42.0/24
      network 172.42.43.0/24
    !
      neighbor 10.1.0.1 activate
      no neighbor 10.1.0.1 send-community all
      neighbor 10.1.0.1 send-community standard
      neighbor 10.1.0.1 send-community large
    !
     address-family ipv6 unicast
    !
  
    !
      network 2001:db8:1:2::/64
    !
      network 2001:db8:dead:beef::/64
    !
    !
      neighbor 2001:db8:3::1 activate
      no neighbor 2001:db8:3::1 send-community all
      neighbor 2001:db8:3::1 send-community standard
      neighbor 2001:db8:3::1 send-community large
    !
    !
    ip route 172.42.42.0/24 Null0
    ip route 172.42.43.0/24 Null0
    !
    do write
ok: [x2] => 
  msg: |-
    bgp configuration for x2
    =========================================
    !
    router bgp 65101
      no bgp ebgp-requires-policy
      no bgp default ipv4-unicast
      bgp default show-hostname
      bgp default show-nexthop-hostname
  
      ! Consider AS paths of same length but with different AS as ECMP candidates
      bgp bestpath as-path multipath-relax
  
      bgp router-id 10.0.0.3
    !
      neighbor 10.1.0.5 remote-as 65000
      neighbor 10.1.0.5 description dut
    !
      neighbor 2001:db8:3:1::1 remote-as 65000
      neighbor 2001:db8:3:1::1 description dut
    !
     address-family ipv4 unicast
    !
  
    !
      network 10.0.0.3/32
    !
    !
    !
      neighbor 10.1.0.5 activate
      no neighbor 10.1.0.5 send-community all
      neighbor 10.1.0.5 send-community standard
      neighbor 10.1.0.5 send-community large
    !
     address-family ipv6 unicast
    !
  
    !
      network 2001:db8:1:3::/64
    !
    !
    !
      neighbor 2001:db8:3:1::1 activate
      no neighbor 2001:db8:3:1::1 send-community all
      neighbor 2001:db8:3:1::1 send-community standard
      neighbor 2001:db8:3:1::1 send-community large
    !
    !
    !
    do write
ok: [x3] => 
  msg: |-
    bgp configuration for x3
    =========================================
    !
    router bgp 65102
      no bgp ebgp-requires-policy
      no bgp default ipv4-unicast
      bgp default show-hostname
      bgp default show-nexthop-hostname
  
      ! Consider AS paths of same length but with different AS as ECMP candidates
      bgp bestpath as-path multipath-relax
  
      bgp router-id 10.0.0.4
    !
      neighbor 10.1.0.9 remote-as 65000
      neighbor 10.1.0.9 description dut
    !
      neighbor 2001:db8:3:2::1 remote-as 65000
      neighbor 2001:db8:3:2::1 description dut
    !
     address-family ipv4 unicast
    !
  
    !
      network 10.0.0.4/32
    !
    !
    !
      neighbor 10.1.0.9 activate
      no neighbor 10.1.0.9 send-community all
      neighbor 10.1.0.9 send-community standard
      neighbor 10.1.0.9 send-community large
    !
     address-family ipv6 unicast
    !
  
    !
      network 2001:db8:1:4::/64
    !
    !
    !
      neighbor 2001:db8:3:2::1 activate
      no neighbor 2001:db8:3:2::1 send-community all
      neighbor 2001:db8:3:2::1 send-community standard
      neighbor 2001:db8:3:2::1 send-community large
    !
    !
    !
    do write
ok: [dut] => 
  msg: |-
    bgp configuration for dut
    =========================================
    !
    !
    router bgp 65000
      bgp advertise-inactive
      bgp log-neighbor-changes
      no bgp default ipv4-unicast
      no bgp default ipv6-unicast
      router-id 10.0.0.1
    !
      neighbor 10.1.0.2 remote-as 65100
      neighbor 10.1.0.2 description x1
      neighbor 10.1.0.2 send-community standard large
    !
      neighbor 2001:db8:3::2 remote-as 65100
      neighbor 2001:db8:3::2 description x1
      neighbor 2001:db8:3::2 send-community standard large
    !
      neighbor 10.1.0.6 remote-as 65101
      neighbor 10.1.0.6 description x2
      neighbor 10.1.0.6 send-community standard large
    !
      neighbor 2001:db8:3:1::2 remote-as 65101
      neighbor 2001:db8:3:1::2 description x2
      neighbor 2001:db8:3:1::2 send-community standard large
    !
      neighbor 10.1.0.10 remote-as 65102
      neighbor 10.1.0.10 description x3
      neighbor 10.1.0.10 send-community standard large
    !
      neighbor 2001:db8:3:2::2 remote-as 65102
      neighbor 2001:db8:3:2::2 description x3
      neighbor 2001:db8:3:2::2 send-community standard large
    !
    !
     address-family ipv4
  
      network 10.0.0.1/32
    !
    !
    !
      neighbor 10.1.0.2 activate
      neighbor 10.1.0.6 activate
      neighbor 10.1.0.10 activate
    !
     address-family ipv6
  
      network 2001:db8:1:1::/64
    !
    !
    !
      neighbor 2001:db8:3::2 activate
      neighbor 2001:db8:3:1::2 activate
      neighbor 2001:db8:3:2::2 activate
    !

TASK [Find configuration deployment deploy_script for bgp] *********************
ok: [x1]
ok: [x2]
ok: [x3]
ok: [dut]

TASK [Deploy bgp configuration] ************************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for dut
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/frr.yml for x1, x2, x3

TASK [eos_config: deploying bgp from /home/pipi/net101/tools/netsim/ansible/templates/bgp/eos.j2] ***
changed: [dut]

TASK [template] ****************************************************************
changed: [x2]
changed: [x3]
changed: [x1]

TASK [set_fact] ****************************************************************
ok: [x1]
ok: [x2]
ok: [x3]

TASK [run /tmp/config.sh to deploy bgp config from /home/pipi/net101/tools/netsim/ansible/templates/bgp/frr.j2] ***
skipping: [x1]
skipping: [x2]
skipping: [x3]

TASK [run vtysh to import bgp config from /home/pipi/net101/tools/netsim/ansible/templates/bgp/frr.j2] ***
changed: [x1]
changed: [x2]
changed: [x3]

PLAY [Deploy custom deployment templates] **************************************

TASK [Run custom configuration deployment scripts] *****************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-custom-config.yml for dut => (item=bgp.policy)

TASK [Find configuration template] *********************************************
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Check is the configuration template is a file] ***************************
ok: [dut -> localhost]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Process template /home/pipi/net101/tools/netsim/extra/bgp.policy/eos.j2 for dut] ***
skipping: [dut]

TASK [Find custom configuration deployment script] *****************************
ok: [dut]

TASK [Run the configuration deployment script] *********************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/eos.yml for dut

TASK [eos_config: deploying bgp.policy from /home/pipi/net101/tools/netsim/extra/bgp.policy/eos.j2] ***
changed: [dut]

PLAY RECAP *********************************************************************
dut                        : ok=32   changed=4    unreachable=0    failed=0    skipped=3    rescued=0    ignored=0   
x1                         : ok=32   changed=7    unreachable=0    failed=0    skipped=5    rescued=0    ignored=0   
x2                         : ok=32   changed=7    unreachable=0    failed=0    skipped=5    rescued=0    ignored=0   
x3                         : ok=32   changed=7    unreachable=0    failed=0    skipped=5    rescued=0    ignored=0   



Use this topology to test route maps with prefix lists for IPv4 and IPv6