Warning in ansible: You're using Ansible version 12.x or higher; netlab might not work correctly
... Ansible core version 2.19 introduced breaking changes in templates and playbooks
... We tested netlab core with Ansible version 12.x but not every device template
... You might want to downgrade Ansible to version 11.10 or lower.
... Use 'netlab install ansible' on Ubuntu to do that
... Finally, please open a GitHub issue if you experience errors/crashes
... Set defaults.ansible.warnings.ver12 to False to hide this warning
 [INFO] Checking for updates in configuration templates
 [INFO] Creating configuration snippets
[CREATED] dut: normalize,initial,vlan,gateway
[CREATED] x1: initial,vlan,gateway
[CREATED] h1: initial,routing
[CREATED] h2: initial,routing
[CREATED] h3: initial,routing
[CREATED] th: initial,routing
 [INFO] Executing initial configuration for node th (namespace clab-
          ml_17-th)
 [INFO] Executing routing configuration for node th (namespace clab-
          ml_17-th)

 [INFO] Starting Ansible playbook to deploy the rest of the
          configurations
[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned
[WARNING]: Found variable using reserved name 'hosts'.
Origin: /work/netlab_cicd/group_vars/all/topology.yml:165:1

163     ipv4: 10.2.0.0/24
164     prefix: 32
165 hosts:
    ^ column 1


PLAY [Deploy initial device configuration] *************************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [x1]
ok: [h1]
ok: [h2]
ok: [h3]
ok: [th]
ok: [dut]

TASK [Generic readiness tests] *************************************************
skipping: [x1]
skipping: [h1]
skipping: [h2]
skipping: [h3]
skipping: [th]
included: /home/pipi/netlab_gh/netsim/ansible/tasks/readiness-check/ssh.yml for dut => (item=ssh)

TASK [Check if 'sshpass' is installed] *****************************************
ok: [dut -> localhost]

TASK [Check for 'timeout' command] *********************************************
ok: [dut -> localhost]

TASK [Execute local ssh command to check ssh readiness] ************************
FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (20 retries left).
ok: [dut -> localhost]

TASK [Confirm dut SSH server works] ********************************************
ok: [dut] => {
    "msg": "Node dut is ready."
}

TASK [Find device readiness script] ********************************************
ok: [x1]
ok: [h1]
ok: [h2]
ok: [h3]
ok: [th]
ok: [dut]

TASK [Wait for device to become ready] *****************************************
skipping: [dut]
skipping: [x1]
skipping: [h1]
skipping: [h2]
skipping: [h3]
skipping: [th]

TASK [Normalize config on bridge-like devices] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for x1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h3
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for th

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [dut]

TASK [Find configuration template for normalize] *******************************
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => {
    "msg": "normalize configuration for dut\n=========================================\n!\ninterface Ethernet1\n shutdown\n!\ninterface Ethernet2\n shutdown\n!\ninterface Ethernet3\n shutdown\n!\ninterface Ethernet4\n shutdown\n"
}

TASK [Deploy normalize configuration] ******************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for dut

TASK [eos_config: deploying normalize from /work/netlab_cicd/node_files/dut/normalize] ***
[WARNING]: To ensure idempotency and correct diff the input configuration lines should be similar to how they appear if present in the running configuration on device including the indentation
[WARNING]: Task result `warnings` was <class 'str'> instead of <class 'list'>.
changed: [dut]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [x1]

TASK [Find configuration template for normalize] *******************************
ok: [x1]

TASK [fail] ********************************************************************
skipping: [x1]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [x1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [x1]

TASK [Deploy normalize configuration] ******************************************
skipping: [x1]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [h1]

TASK [Find configuration template for normalize] *******************************
ok: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy normalize configuration] ******************************************
skipping: [h1]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [h2]

TASK [Find configuration template for normalize] *******************************
ok: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy normalize configuration] ******************************************
skipping: [h2]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [h3]

TASK [Find configuration template for normalize] *******************************
ok: [h3]

TASK [fail] ********************************************************************
skipping: [h3]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [h3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h3]

TASK [Deploy normalize configuration] ******************************************
skipping: [h3]

TASK [Figure out whether to deploy the module normalize on current device] *****
ok: [th]

TASK [Find configuration template for normalize] *******************************
ok: [th]

TASK [fail] ********************************************************************
skipping: [th]

TASK [Find configuration deployment deploy_script for normalize] ***************
ok: [th]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [th]

TASK [Deploy normalize configuration] ******************************************
skipping: [th]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for x1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h3
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for th

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [dut]

TASK [Find configuration template for initial] *********************************
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => {
    "msg": "initial configuration for dut\n=========================================\nhostname dut\n!\nlogging monitor debugging\naaa authorization exec default local\n!\nlldp run\nip routing\nipv6 unicast-routing\n!\n!\nip host h1 172.16.33.3\nip host h2 172.16.33.4\nip host h3 172.16.33.5\nip host th 172.16.44.6\nip host x1 10.0.0.2 172.16.44.2 172.16.33.2\nipv6 host h1 2001:db8:cafe:33::3\nipv6 host h2 2001:db8:cafe:33::4\nipv6 host h3 2001:db8:cafe:33::5\nipv6 host th 2001:db8:cafe:44::6\nipv6 host x1 2001:db8:cafe:44::2\n!\ninterface defaults\n mtu 1500\n!\ninterface Management0\n no lldp transmit\n no lldp receive\n!\ninterface Loopback0\n ip address 10.0.0.1/32\n!\ninterface Ethernet1\n no switchport\n description dut -> [x1,th]\n ip address 172.16.44.1/24\n ipv6 nd ra interval 5\n ipv6 address 2001:db8:cafe:44::1/64\n mac-address caf0.0001.0001\n!\n no shutdown\n!\ninterface Ethernet2\n no switchport\n description [Access VLAN edge] dut -> h1\n!\n no shutdown\n!\ninterface Ethernet3\n no switchport\n description [Access VLAN edge] dut -> h3\n!\n no shutdown\n!\ninterface Ethernet4\n no switchport\n description [Access VLAN edge] dut -> x1\n!\n no shutdown\n!\ninterface Vlan1000\n description VLAN edge (1000) -> [h1,h3,h2,x1]\n ip address 172.16.33.1/24\n ipv6 nd ra interval 5\n ipv6 address 2001:db8:cafe:33::1/64\n!\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for dut

TASK [eos_config: deploying initial from /work/netlab_cicd/node_files/dut/initial] ***
changed: [dut]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [x1]

TASK [Find configuration template for initial] *********************************
ok: [x1]

TASK [fail] ********************************************************************
skipping: [x1]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [x1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [x1] => {
    "msg": "initial configuration for x1\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=1\nsysctl -w net.ipv6.conf.all.forwarding=1\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\nif [ ! -e /sys/class/net/lo ]; then\n  if [ ! -e /sys/devices/virtual/net/lo ]; then\n    ip link add lo type dummy\n    ip link set dev lo up\n  fi\nfi\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.autoconf=0\nsysctl -qw net.ipv6.conf.eth1.accept_ra=0\nip link set dev eth1 mtu 1500\nip link set eth1 up\nip link set eth2 down\nsysctl -qw net.ipv6.conf.eth2.disable_ipv6=1\nip link set dev eth2 mtu 1500\nip link set eth2 up\nip link set eth3 down\nsysctl -qw net.ipv6.conf.eth3.disable_ipv6=1\nip link set dev eth3 mtu 1500\nip link set eth3 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname x1\n!\nlog file /tmp/logging\n\n!\nip forwarding\nipv6 forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface lo\n no shutdown\n ip address 10.0.0.2/32\n!\ninterface eth1\n no shutdown\n description x1 -> [dut,th]\n ip address 172.16.44.2/24\n ipv6 address 2001:db8:cafe:44::2/64\n ipv6 nd ra-interval 5\n no ipv6 nd suppress-ra\n!\ninterface eth2\n no shutdown\n description [Access VLAN edge] x1 -> dut\n ! no ip address\n!\ninterface eth3\n no shutdown\n description [Access VLAN edge] x1 -> h2\n ! no ip address\n!\ninterface vlan1000\n no shutdown\n description VLAN edge (1000) -> [h1,h3,dut,h2]\n ip address 172.16.33.2/24\n ipv6 address 2001:db8:cafe:33::2/64\n ipv6 nd ra-interval 5\n no ipv6 nd suppress-ra\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for x1

TASK [Attempt to load VRF kernel module] ***************************************
changed: [x1 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [x1]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for x1

TASK [template] ****************************************************************
changed: [x1]

TASK [set_fact] ****************************************************************
ok: [x1]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/node_files/x1/initial] ***
changed: [x1]

TASK [run vtysh to import initial config from /work/netlab_cicd/node_files/x1/initial] ***
skipping: [x1]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [h1]

TASK [Find configuration template for initial] *********************************
ok: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [h1] => {
    "msg": "initial configuration for h1\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=0\nsysctl -w net.ipv6.conf.all.forwarding=0\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.autoconf=1\nsysctl -qw net.ipv6.conf.eth1.accept_ra=1\nip link set dev eth1 mtu 1500\nip link set eth1 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname h1\n!\nlog file /tmp/logging\n\n!\nno ip forwarding\nno ipv6 forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface eth1\n no shutdown\n description h1 -> [h3,dut,h2,x1]\n ip address 172.16.33.3/24\n ipv6 address 2001:db8:cafe:33::3/64\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for h1

TASK [Attempt to load VRF kernel module] ***************************************
changed: [h1 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [h1]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for h1

TASK [template] ****************************************************************
changed: [h1]

TASK [set_fact] ****************************************************************
ok: [h1]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/node_files/h1/initial] ***
changed: [h1]

TASK [run vtysh to import initial config from /work/netlab_cicd/node_files/h1/initial] ***
skipping: [h1]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [h2]

TASK [Find configuration template for initial] *********************************
ok: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [h2] => {
    "msg": "initial configuration for h2\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=0\nsysctl -w net.ipv6.conf.all.forwarding=0\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.autoconf=1\nsysctl -qw net.ipv6.conf.eth1.accept_ra=1\nip link set dev eth1 mtu 1500\nip link set eth1 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname h2\n!\nlog file /tmp/logging\n\n!\nno ip forwarding\nno ipv6 forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface eth1\n no shutdown\n description h2 -> [h1,h3,dut,x1]\n ip address 172.16.33.4/24\n ipv6 address 2001:db8:cafe:33::4/64\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for h2

TASK [Attempt to load VRF kernel module] ***************************************
changed: [h2 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [h2]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for h2

TASK [template] ****************************************************************
changed: [h2]

TASK [set_fact] ****************************************************************
ok: [h2]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/node_files/h2/initial] ***
changed: [h2]

TASK [run vtysh to import initial config from /work/netlab_cicd/node_files/h2/initial] ***
skipping: [h2]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [h3]

TASK [Find configuration template for initial] *********************************
ok: [h3]

TASK [fail] ********************************************************************
skipping: [h3]

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [h3]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [h3] => {
    "msg": "initial configuration for h3\n=========================================\n#!/bin/bash\n#\nset -e\nset -x\n#\n# Create bash profile script\n#\ncat <<SCRIPT >/root/.bash_profile\n#!/bin/bash\n#\nexport PS1=\"\\h(bash)# \"\necho\necho \"Use vtysh to connect to FRR daemon\"\necho\nSCRIPT\n#\n# This is an artifact of unknown provenance that should be removed in a year or two (= 2026/2027)\n#\n# FRR controls these parameters with 'ip forwarding' and 'ipv6 forwarding' commands\n#\nsysctl -w net.ipv4.ip_forward=0\nsysctl -w net.ipv6.conf.all.forwarding=0\n#\n#\n# Get the current next hop for the default route\n#\ndef_nh=$(ip route list default|awk '{ print $3 }')\n#\n# Create the management VRF and add eth0 to it\n#\nif [ ! -e /sys/devices/virtual/net/mgmt ]; then\n  ip link add mgmt type vrf table 42\nfi\nip link set mgmt up\nsysctl -qw net.ipv6.conf.eth0.keep_addr_on_down=1\nip link set eth0 master mgmt\n#\n# Reinstall the default route if we had it before\n#\nif [[ -n \"$def_nh\" ]]; then\n  ip route add 0.0.0.0/0 vrf mgmt via $def_nh\nfi\n#\n# Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)\n#\n\n# Set system defaults\n#\n# Send ARP requests from a sane source IP address\n#\nsysctl -w net.ipv4.conf.all.arp_announce=2\n\n#\n# Create loopbacks, stub and lag/bond devices\n#\n\n# Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)\n#\nip link set eth1 down\nsysctl -qw net.ipv6.conf.eth1.autoconf=1\nsysctl -qw net.ipv6.conf.eth1.accept_ra=1\nip link set dev eth1 mtu 1500\nip link set eth1 up\n\n#\n# Add vtysh.conf file\necho \"service integrated-vtysh-config\" >/etc/frr/vtysh.conf\n\n#\n# Rest of initial configuration done through VTYSH\n#\ncat >/tmp/config <<CONFIG\nhostname h3\n!\nlog file /tmp/logging\n\n!\nno ip forwarding\nno ipv6 forwarding\nvrf mgmt\n exit-vrf\n!\nfrr defaults datacenter\n!\ninterface eth1\n no shutdown\n description h3 -> [h1,dut,h2,x1]\n ip address 172.16.33.5/24\n ipv6 address 2001:db8:cafe:33::5/64\n!\ndo write\nCONFIG\nvtysh -f /tmp/config\n!\nexit 0\n"
}

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/initial-clab.yml for h3

TASK [Attempt to load VRF kernel module] ***************************************
changed: [h3 -> localhost]

TASK [Disable FRR management VRF when modprobe fails] **************************
skipping: [h3]

TASK [include_tasks] ***********************************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/frr/deploy-config.yml for h3

TASK [template] ****************************************************************
changed: [h3]

TASK [set_fact] ****************************************************************
ok: [h3]

TASK [run /tmp/config.sh to deploy initial config from /work/netlab_cicd/node_files/h3/initial] ***
changed: [h3]

TASK [run vtysh to import initial config from /work/netlab_cicd/node_files/h3/initial] ***
skipping: [h3]

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [th]

TASK [Find configuration template for initial] *********************************
skipping: [th]

TASK [fail] ********************************************************************
skipping: [th]

TASK [Find configuration deployment deploy_script for initial] *****************
skipping: [th]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [th]

TASK [Deploy initial configuration] ********************************************
skipping: [th]

PLAY [Deploy module-specific configurations] ***********************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [x1]
ok: [h1]
ok: [h2]
ok: [h3]
ok: [th]
ok: [dut]

TASK [Deploy individual configuration modules] *********************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut => (item=gateway)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for x1 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for x1 => (item=gateway)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for x1 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1 => (item=gateway)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2 => (item=gateway)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h2 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h3 => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h3 => (item=gateway)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h3 => (item=routing)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for th => (item=vlan)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for th => (item=gateway)
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for th => (item=routing)

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [dut]

TASK [Find configuration template for vlan] ************************************
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Find configuration deployment deploy_script for vlan] ********************
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => {
    "msg": "vlan configuration for dut\n=========================================\nvlan 1000\n name edge\n!\n\n!\ninterface Ethernet2\n switchport\n switchport access vlan 1000\n!\ninterface Ethernet3\n switchport\n switchport access vlan 1000\n!\ninterface Ethernet4\n switchport\n switchport access vlan 1000\n!\ninterface Vlan1000\n"
}

TASK [Deploy vlan configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for dut

TASK [eos_config: deploying vlan from /work/netlab_cicd/node_files/dut/vlan] ***
changed: [dut]

TASK [Figure out whether to deploy the module gateway on current device] *******
ok: [dut]

TASK [Find configuration template for gateway] *********************************
ok: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Find configuration deployment deploy_script for gateway] *****************
ok: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => {
    "msg": "gateway configuration for dut\n=========================================\nno ip icmp redirect\n!\nip virtual-router mac-address 0200.cafe.c001\n!\ninterface Vlan1000\n  ip virtual-router address 172.16.33.42/24\n  ipv6 virtual-router address 2001:db8:cafe:33::2a\n"
}

TASK [Deploy gateway configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for dut

TASK [eos_config: deploying gateway from /work/netlab_cicd/node_files/dut/gateway] ***
changed: [dut]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [dut]

TASK [Find configuration template for routing] *********************************
skipping: [dut]

TASK [fail] ********************************************************************
skipping: [dut]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [dut]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [dut]

TASK [Deploy routing configuration] ********************************************
skipping: [dut]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [x1]

TASK [Find configuration template for vlan] ************************************
ok: [x1]

TASK [fail] ********************************************************************
skipping: [x1]

TASK [Find configuration deployment deploy_script for vlan] ********************
ok: [x1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [x1] => {
    "msg": "vlan configuration for x1\n=========================================\n#!/bin/bash\n#\nset -e # Exit immediately when any command fails\n#\nif [ ! -e /sys/devices/virtual/net/vlan1000 ]; then\n  ip link add vlan1000 type bridge\n  ip link set dev vlan1000 address ca:f4:00:02:00:00\n\n  ip link set dev vlan1000 mtu 1500\n  ip addr flush dev vlan1000\n  ip addr add 172.16.33.2/24 dev vlan1000\n  sysctl -w net.ipv6.conf.vlan1000.addr_gen_mode=3\n  ip addr add 2001:db8:cafe:33::2/64 dev vlan1000\nfi\n\nip link set dev eth2 master vlan1000\nip link set dev eth3 master vlan1000\n\nip link set dev vlan1000 up\n"
}

TASK [Deploy vlan configuration] ***********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for x1

TASK [template] ****************************************************************
changed: [x1]

TASK [set_fact] ****************************************************************
ok: [x1]

TASK [run /tmp/config.sh to deploy vlan config from /work/netlab_cicd/node_files/x1/vlan] ***
changed: [x1]

TASK [run vtysh to import vlan config from /work/netlab_cicd/node_files/x1/vlan] ***
skipping: [x1]

TASK [Figure out whether to deploy the module gateway on current device] *******
ok: [x1]

TASK [Find configuration template for gateway] *********************************
ok: [x1]

TASK [fail] ********************************************************************
skipping: [x1]

TASK [Find configuration deployment deploy_script for gateway] *****************
ok: [x1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [x1] => {
    "msg": "gateway configuration for x1\n=========================================\n#!/bin/bash\n#\nset -e # Exit immediately when any command fails\n#\nsysctl -w net.ipv6.conf.all.enhanced_dad=0\nsysctl -w net.ipv6.conf.default.enhanced_dad=0\nif [ ! -e /sys/class/net/varp-40000 ]; then\n  ip link add varp-40000 link vlan1000 type macvlan mode private\n  ip link set dev varp-40000 address 02:00:ca:fe:c0:01\n  bridge fdb replace 02:00:ca:fe:c0:01 dev vlan1000 self\n  ip addr add 172.16.33.42/24 dev varp-40000 metric 1024\n  ip addr add 2001:db8:cafe:33::2a/64 dev varp-40000 metric 1024\n  sysctl -w net.ipv4.conf.vlan1000.arp_announce=2\n  sysctl -w net.ipv4.conf.vlan1000.arp_ignore=2\n  sysctl -w net.ipv4.conf.vlan1000.arp_accept=1\n  sysctl -w net.ipv6.conf.varp-40000.enhanced_dad=0\n  sysctl -w net.ipv6.conf.varp-40000.accept_dad=0\n  sysctl -w net.ipv6.conf.varp-40000.dad_transmits=0\n  ip link set dev varp-40000 up\nfi\n#!/bin/bash\ncat >/tmp/vrrp_config <<CONFIG\ndo write\nCONFIG\nvtysh -f /tmp/vrrp_config\n"
}

TASK [Deploy gateway configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for x1

TASK [template] ****************************************************************
changed: [x1]

TASK [set_fact] ****************************************************************
ok: [x1]

TASK [run /tmp/config.sh to deploy gateway config from /work/netlab_cicd/node_files/x1/gateway] ***
changed: [x1]

TASK [run vtysh to import gateway config from /work/netlab_cicd/node_files/x1/gateway] ***
skipping: [x1]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [x1]

TASK [Find configuration template for routing] *********************************
skipping: [x1]

TASK [fail] ********************************************************************
skipping: [x1]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [x1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [x1]

TASK [Deploy routing configuration] ********************************************
skipping: [x1]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [h1]

TASK [Find configuration template for vlan] ************************************
skipping: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for vlan] ********************
skipping: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy vlan configuration] ***********************************************
skipping: [h1]

TASK [Figure out whether to deploy the module gateway on current device] *******
ok: [h1]

TASK [Find configuration template for gateway] *********************************
skipping: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for gateway] *****************
skipping: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h1]

TASK [Deploy gateway configuration] ********************************************
skipping: [h1]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [h1]

TASK [Find configuration template for routing] *********************************
ok: [h1]

TASK [fail] ********************************************************************
skipping: [h1]

TASK [Find configuration deployment deploy_script for routing] *****************
ok: [h1]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [h1] => {
    "msg": "routing configuration for h1\n=========================================\n!\n!\n!\n!\n! Global static routes\n!\nip route 172.16.44.0/24 172.16.33.42 eth1\nipv6 route 2001:db8:cafe:44::/64 2001:db8:cafe:33::2a eth1\n"
}

TASK [Deploy routing configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for h1

TASK [template] ****************************************************************
changed: [h1]

TASK [set_fact] ****************************************************************
ok: [h1]

TASK [run /tmp/config.sh to deploy routing config from /work/netlab_cicd/node_files/h1/routing] ***
skipping: [h1]

TASK [run vtysh to import routing config from /work/netlab_cicd/node_files/h1/routing] ***
changed: [h1]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [h2]

TASK [Find configuration template for vlan] ************************************
skipping: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for vlan] ********************
skipping: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy vlan configuration] ***********************************************
skipping: [h2]

TASK [Figure out whether to deploy the module gateway on current device] *******
ok: [h2]

TASK [Find configuration template for gateway] *********************************
skipping: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for gateway] *****************
skipping: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h2]

TASK [Deploy gateway configuration] ********************************************
skipping: [h2]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [h2]

TASK [Find configuration template for routing] *********************************
ok: [h2]

TASK [fail] ********************************************************************
skipping: [h2]

TASK [Find configuration deployment deploy_script for routing] *****************
ok: [h2]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [h2] => {
    "msg": "routing configuration for h2\n=========================================\n!\n!\n!\n!\n! Global static routes\n!\nip route 172.16.44.0/24 172.16.33.42 eth1\nipv6 route 2001:db8:cafe:44::/64 2001:db8:cafe:33::2a eth1\n"
}

TASK [Deploy routing configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for h2

TASK [template] ****************************************************************
changed: [h2]

TASK [set_fact] ****************************************************************
ok: [h2]

TASK [run /tmp/config.sh to deploy routing config from /work/netlab_cicd/node_files/h2/routing] ***
skipping: [h2]

TASK [run vtysh to import routing config from /work/netlab_cicd/node_files/h2/routing] ***
changed: [h2]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [h3]

TASK [Find configuration template for vlan] ************************************
skipping: [h3]

TASK [fail] ********************************************************************
skipping: [h3]

TASK [Find configuration deployment deploy_script for vlan] ********************
skipping: [h3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h3]

TASK [Deploy vlan configuration] ***********************************************
skipping: [h3]

TASK [Figure out whether to deploy the module gateway on current device] *******
ok: [h3]

TASK [Find configuration template for gateway] *********************************
skipping: [h3]

TASK [fail] ********************************************************************
skipping: [h3]

TASK [Find configuration deployment deploy_script for gateway] *****************
skipping: [h3]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [h3]

TASK [Deploy gateway configuration] ********************************************
skipping: [h3]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [h3]

TASK [Find configuration template for routing] *********************************
ok: [h3]

TASK [fail] ********************************************************************
skipping: [h3]

TASK [Find configuration deployment deploy_script for routing] *****************
ok: [h3]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [h3] => {
    "msg": "routing configuration for h3\n=========================================\n!\n!\n!\n!\n! Global static routes\n!\nip route 172.16.44.0/24 172.16.33.42 eth1\nipv6 route 2001:db8:cafe:44::/64 2001:db8:cafe:33::2a eth1\n"
}

TASK [Deploy routing configuration] ********************************************
included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/frr.yml for h3

TASK [template] ****************************************************************
changed: [h3]

TASK [set_fact] ****************************************************************
ok: [h3]

TASK [run /tmp/config.sh to deploy routing config from /work/netlab_cicd/node_files/h3/routing] ***
skipping: [h3]

TASK [run vtysh to import routing config from /work/netlab_cicd/node_files/h3/routing] ***
changed: [h3]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [th]

TASK [Find configuration template for vlan] ************************************
skipping: [th]

TASK [fail] ********************************************************************
skipping: [th]

TASK [Find configuration deployment deploy_script for vlan] ********************
skipping: [th]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [th]

TASK [Deploy vlan configuration] ***********************************************
skipping: [th]

TASK [Figure out whether to deploy the module gateway on current device] *******
ok: [th]

TASK [Find configuration template for gateway] *********************************
skipping: [th]

TASK [fail] ********************************************************************
skipping: [th]

TASK [Find configuration deployment deploy_script for gateway] *****************
skipping: [th]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [th]

TASK [Deploy gateway configuration] ********************************************
skipping: [th]

TASK [Figure out whether to deploy the module routing on current device] *******
ok: [th]

TASK [Find configuration template for routing] *********************************
skipping: [th]

TASK [fail] ********************************************************************
skipping: [th]

TASK [Find configuration deployment deploy_script for routing] *****************
skipping: [th]

TASK [Print deployed configuration when running in verbose mode] ***************
skipping: [th]

TASK [Deploy routing configuration] ********************************************
skipping: [th]

PLAY [Deploy custom deployment templates] **************************************
skipping: no hosts matched

PLAY RECAP *********************************************************************
dut                        : ok=38   changed=4    unreachable=0    failed=0    skipped=10   rescued=0    ignored=0   
h1                         : ok=31   changed=5    unreachable=0    failed=0    skipped=20   rescued=0    ignored=0   
h2                         : ok=31   changed=5    unreachable=0    failed=0    skipped=20   rescued=0    ignored=0   
h3                         : ok=31   changed=5    unreachable=0    failed=0    skipped=20   rescued=0    ignored=0   
th                         : ok=15   changed=0    unreachable=0    failed=0    skipped=25   rescued=0    ignored=0   
x1                         : ok=38   changed=7    unreachable=0    failed=0    skipped=17   rescued=0    ignored=0   


Warning: The following warnings were generated during the 'netlab initial' processing
Warning: ansible: You're using Ansible version 12.x or higher; netlab might not work correctly
Results of configuration script deployments
================================================================================
th                           OK: 2   


This lab tests the anycast gateway functionality. It checks whether the
anycast IP is active, whether it has the correct MAC address, and whether the
first device in the forwarding path intercepts the packets with the shared MAC
address.