[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned [WARNING]: Found variable using reserved name: hosts PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [dut] ok: [x1] ok: [x2] TASK [Find device readiness script] ******************************************** ok: [dut] ok: [x1] ok: [x2] TASK [Wait for device to become ready] ***************************************** skipping: [dut] skipping: [x1] skipping: [x2] TASK [Normalize config on bridge-like devices] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut, x1, x2 TASK [Figure out whether to deploy the module normalize on current device] ***** ok: [dut] ok: [x1] ok: [x2] TASK [Find configuration template for normalize] ******************************* ok: [dut] ok: [x1] ok: [x2] TASK [fail] ******************************************************************** skipping: [dut] skipping: [x1] skipping: [x2] TASK [Find configuration deployment deploy_script for normalize] *************** ok: [dut] ok: [x1] ok: [x2] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [dut] ok: [x1] => msg: |- normalize configuration for x1 ========================================= ! interface Ethernet1 shutdown mac-address 52dc.cafe.0201 ! interface Ethernet2 shutdown mac-address 52dc.cafe.0202 ok: [x2] => msg: |- normalize configuration for x2 ========================================= ! interface Ethernet1 shutdown mac-address 52dc.cafe.0301 ! interface Ethernet2 shutdown mac-address 52dc.cafe.0302 TASK [Deploy normalize configuration] ****************************************** skipping: [dut] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for x1, x2 TASK [eos_config: deploying normalize from /home/pipi/netlab_gh/netsim/ansible/templates/normalize/eos.j2] *** [WARNING]: To ensure idempotency and correct diff the input configuration lines should be similar to how they appear if present in the running configuration on device including the indentation changed: [x2] changed: [x1] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut, x1, x2 TASK [Figure out whether to deploy the module initial on current device] ******* ok: [dut] ok: [x1] ok: [x2] TASK [Find configuration template for initial] ********************************* ok: [dut] ok: [x1] ok: [x2] TASK [fail] ******************************************************************** skipping: [dut] skipping: [x1] skipping: [x2] TASK [Find configuration deployment deploy_script for initial] ***************** ok: [dut] ok: [x1] ok: [x2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => msg: |- initial configuration for dut ========================================= hostname dut ! lldp enable ! ! ip host x1 10.0.0.2 ip host x2 10.0.0.3 ! ! default mtu 1532 ! interface mgmt1/1/1 no lldp transmit no lldp receive ! interface loopback0 no shutdown ip address 10.0.0.1/32 no ipv6 enable ! interface port-channel1 no shutdown description "[Access VLAN red] dut -> x1" ! interface port-channel2 no shutdown description "[Access VLAN blue] dut -> x2" ! interface ethernet1/1/1 no shutdown no switchport description "dut -> x1" ! interface ethernet1/1/2 no shutdown no switchport description "dut -> x1" ! interface ethernet1/1/3 no shutdown no switchport description "dut -> x2" ! interface ethernet1/1/4 no shutdown no switchport description "dut -> x2" ! interface vlan1000 no shutdown description "VLAN red (1000) -> [x1]" ip address 172.16.0.1/24 no ipv6 enable ! interface vlan1001 no shutdown description "VLAN blue (1001) -> [x2]" ip address 172.16.1.1/24 no ipv6 enable ! ok: [x1] => msg: |- initial configuration for x1 ========================================= hostname x1 ! logging monitor debugging aaa authorization exec default local ! lldp run ip routing no ipv6 unicast-routing ! ! ip host dut 10.0.0.1 172.16.0.1 172.16.1.1 ip host x2 10.0.0.3 172.16.1.3 ! interface Management1 no lldp transmit no lldp receive ! interface Loopback0 ip address 10.0.0.2/32 ! interface port-channel1 no switchport description [Access VLAN red] x1 -> dut ! interface Ethernet1 no switchport description x1 -> dut ! mac-address 52dc.cafe.0201 no shutdown ! interface Ethernet2 no switchport description x1 -> dut ! mac-address 52dc.cafe.0202 no shutdown ! interface Vlan1000 description VLAN red (1000) -> [dut] ip address 172.16.0.2/24 ! ok: [x2] => msg: |- initial configuration for x2 ========================================= hostname x2 ! logging monitor debugging aaa authorization exec default local ! lldp run ip routing no ipv6 unicast-routing ! ! ip host dut 10.0.0.1 172.16.0.1 172.16.1.1 ip host x1 10.0.0.2 172.16.0.2 ! interface Management1 no lldp transmit no lldp receive ! interface Loopback0 ip address 10.0.0.3/32 ! interface port-channel1 no switchport description [Access VLAN blue] x2 -> dut ! interface Ethernet1 no switchport description x2 -> dut ! mac-address 52dc.cafe.0301 no shutdown ! interface Ethernet2 no switchport description x2 -> dut ! mac-address 52dc.cafe.0302 no shutdown ! interface Vlan1001 description VLAN blue (1001) -> [dut] ip address 172.16.1.3/24 ! TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/dellos10.yml for dut included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for x1, x2 TASK [wait_for_connection] ***************************************************** skipping: [dut] TASK [dellos10_config: deploying initial from /home/pipi/netlab_gh/netsim/ansible/templates/initial/dellos10.j2, save to startup=yes] *** changed: [dut] TASK [eos_config: deploying initial from /home/pipi/netlab_gh/netsim/ansible/templates/initial/eos.j2] *** changed: [x1] changed: [x2] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [dut] ok: [x1] ok: [x2] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut, x1, x2 => (item=lag) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut, x1, x2 => (item=vlan) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut, x1, x2 => (item=ospf) TASK [Figure out whether to deploy the module lag on current device] *********** ok: [dut] ok: [x1] ok: [x2] TASK [Find configuration template for lag] ************************************* ok: [dut] ok: [x1] ok: [x2] TASK [fail] ******************************************************************** skipping: [dut] skipping: [x1] skipping: [x2] TASK [Find configuration deployment deploy_script for lag] ********************* ok: [dut] ok: [x1] ok: [x2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [x1] => msg: |- lag configuration for x1 ========================================= interface port-channel1 description [Access VLAN red] x1 -> dut ! ! interface Ethernet1 description x1 -> dut in channel-group 1 channel-group 1 mode active lacp timer fast ! interface Ethernet2 description x1 -> dut in channel-group 1 channel-group 1 mode active lacp timer fast ok: [x2] => msg: |- lag configuration for x2 ========================================= interface port-channel1 description [Access VLAN blue] x2 -> dut ! ! interface Ethernet1 description x2 -> dut in channel-group 1 channel-group 1 mode passive lacp timer fast ! interface Ethernet2 description x2 -> dut in channel-group 1 channel-group 1 mode passive lacp timer fast ok: [dut] => msg: |- lag configuration for dut ========================================= ! OS10 internally uses port-channel 1000 and VLAN 4094 for VLT interface port-channel1 description "[Access VLAN red] dut -> x1" ! interface ethernet1/1/1 description "dut -> x1 in channel-group 1" channel-group 1 mode passive lacp rate fast ! interface ethernet1/1/2 description "dut -> x1 in channel-group 1" channel-group 1 mode passive lacp rate fast ! interface port-channel2 description "[Access VLAN blue] dut -> x2" ! interface ethernet1/1/3 description "dut -> x2 in channel-group 2" channel-group 2 mode passive lacp rate fast ! interface ethernet1/1/4 description "dut -> x2 in channel-group 2" channel-group 2 mode passive lacp rate fast ! TASK [Deploy lag configuration] ************************************************ included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/dellos10.yml for dut included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for x1, x2 TASK [wait_for_connection] ***************************************************** skipping: [dut] TASK [dellos10_config: deploying lag from /home/pipi/netlab_gh/netsim/ansible/templates/lag/dellos10.j2, save to startup=yes] *** changed: [dut] TASK [eos_config: deploying lag from /home/pipi/netlab_gh/netsim/ansible/templates/lag/eos.j2] *** changed: [x2] changed: [x1] TASK [Figure out whether to deploy the module vlan on current device] ********** ok: [dut] ok: [x1] ok: [x2] TASK [Find configuration template for vlan] ************************************ ok: [dut] ok: [x1] ok: [x2] TASK [fail] ******************************************************************** skipping: [dut] skipping: [x1] skipping: [x2] TASK [Find configuration deployment deploy_script for vlan] ******************** ok: [dut] ok: [x1] ok: [x2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => msg: |- vlan configuration for dut ========================================= interface vlan 1001 description "VLAN blue" exit ! interface vlan 1000 description "VLAN red" exit ! ! interface port-channel1 switchport mode access switchport access vlan 1000 ! interface port-channel2 switchport mode access switchport access vlan 1001 ! interface vlan1000 ! interface vlan1001 ok: [x1] => msg: |- vlan configuration for x1 ========================================= vlan 1000 name red ! ! interface port-channel1 switchport switchport access vlan 1000 ! interface Vlan1000 ok: [x2] => msg: |- vlan configuration for x2 ========================================= vlan 1001 name blue ! ! interface port-channel1 switchport switchport access vlan 1001 ! interface Vlan1001 TASK [Deploy vlan configuration] *********************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/dellos10.yml for dut included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for x1, x2 TASK [wait_for_connection] ***************************************************** skipping: [dut] TASK [dellos10_config: deploying vlan from /home/pipi/netlab_gh/netsim/ansible/templates/vlan/dellos10.j2, save to startup=yes] *** changed: [dut] TASK [eos_config: deploying vlan from /home/pipi/netlab_gh/netsim/ansible/templates/vlan/eos.j2] *** changed: [x1] changed: [x2] TASK [Figure out whether to deploy the module ospf on current device] ********** ok: [dut] ok: [x1] ok: [x2] TASK [Find configuration template for ospf] ************************************ ok: [dut] ok: [x1] ok: [x2] TASK [fail] ******************************************************************** skipping: [dut] skipping: [x1] skipping: [x2] TASK [Find configuration deployment deploy_script for ospf] ******************** ok: [dut] ok: [x1] ok: [x2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => msg: |- ospf configuration for dut ========================================= router ospf 1 router-id 10.0.0.1 timers lsa arrival 100 timers spf 10 50 500 timers throttle lsa all 100 ! interface loopback0 ip ospf 1 area 0.0.0.0 ip ospf passive ! interface vlan1000 ! VLAN red (1000) -> [x1] ip ospf 1 area 0.0.0.0 ip ospf network point-to-point ! interface vlan1001 ! VLAN blue (1001) -> [x2] ip ospf 1 area 0.0.0.0 ip ospf network point-to-point ! ok: [x2] => msg: |- ospf configuration for x2 ========================================= ! ! OSPFv2 configuration ! router ospf 1 router-id 10.0.0.3 interface unnumbered hello mask tx 0.0.0.0 timers spf delay initial 100 200 500 timers lsa rx min interval 100 timers lsa tx delay initial 100 200 500 ! interface Loopback0 ! ip ospf area 0.0.0.0 ! interface Vlan1001 ! VLAN blue (1001) -> [dut] ip ospf area 0.0.0.0 ip ospf network point-to-point ! ok: [x1] => msg: |- ospf configuration for x1 ========================================= ! ! OSPFv2 configuration ! router ospf 1 router-id 10.0.0.2 interface unnumbered hello mask tx 0.0.0.0 timers spf delay initial 100 200 500 timers lsa rx min interval 100 timers lsa tx delay initial 100 200 500 ! interface Loopback0 ! ip ospf area 0.0.0.0 ! interface Vlan1000 ! VLAN red (1000) -> [dut] ip ospf area 0.0.0.0 ip ospf network point-to-point ! TASK [Deploy ospf configuration] *********************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/dellos10.yml for dut included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for x1, x2 TASK [wait_for_connection] ***************************************************** skipping: [dut] TASK [dellos10_config: deploying ospf from /home/pipi/netlab_gh/netsim/ansible/templates/ospf/dellos10.j2, save to startup=yes] *** changed: [dut] TASK [eos_config: deploying ospf from /home/pipi/netlab_gh/netsim/ansible/templates/ospf/eos.j2] *** changed: [x2] changed: [x1] PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* dut : ok=35 changed=4 unreachable=0 failed=0 skipped=12 rescued=0 ignored=0 x1 : ok=38 changed=5 unreachable=0 failed=0 skipped=6 rescued=0 ignored=0 x2 : ok=38 changed=5 unreachable=0 failed=0 skipped=6 rescued=0 ignored=0 The device under test is a L3 switch using passive LACP. It should be able to establish an OSPF-over-VLAN adjacency with an Arista EOS device using active LACP. but not with another Arista EOS device using passive LACP.