[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned [WARNING]: Found variable using reserved name: hosts PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [s1] ok: [h2] ok: [s2] ok: [h4] ok: [h3] TASK [Find device readiness script] ******************************************** ok: [h1] ok: [h2] ok: [s1] ok: [h4] ok: [h3] ok: [s2] TASK [Wait for device to become ready] ***************************************** skipping: [s1] skipping: [s2] skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Normalize config on bridge-like devices] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1, s2, h1, h2, h3, h4 TASK [Figure out whether to deploy the module normalize on current device] ***** ok: [h1] ok: [h2] ok: [h3] ok: [s1] ok: [s2] ok: [h4] TASK [Find configuration template for normalize] ******************************* ok: [h1] ok: [s1] ok: [h2] ok: [s2] ok: [h4] ok: [h3] TASK [fail] ******************************************************************** skipping: [s1] skipping: [s2] skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Find configuration deployment deploy_script for normalize] *************** ok: [h1] ok: [s1] ok: [h4] ok: [h2] ok: [h3] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [s1] skipping: [s2] skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Deploy normalize configuration] ****************************************** skipping: [s1] skipping: [s2] skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1, s2, h1, h2, h3, h4 TASK [Figure out whether to deploy the module initial on current device] ******* ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Find configuration template for initial] ********************************* ok: [h1] ok: [h2] ok: [h4] ok: [h3] ok: [s1] ok: [s2] TASK [fail] ******************************************************************** skipping: [s1] skipping: [s2] skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Find configuration deployment deploy_script for initial] ***************** ok: [h1] ok: [h3] ok: [h2] ok: [h4] ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [h1] => msg: |- initial configuration for h1 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Send ARP requests from a sane source IP address sysctl -w net.ipv4.conf.all.arp_announce=2 # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.16.0.3/24 dev eth1 2>/dev/null set -e ip addr add 172.16.0.3/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=1 ip link set dev eth1 mtu 1500 ok: [h4] => msg: |- initial configuration for h4 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Send ARP requests from a sane source IP address sysctl -w net.ipv4.conf.all.arp_announce=2 # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.16.3.6/24 dev eth1 2>/dev/null set -e ip addr add 172.16.3.6/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=1 ip link set dev eth1 mtu 1500 ok: [h2] => msg: |- initial configuration for h2 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Send ARP requests from a sane source IP address sysctl -w net.ipv4.conf.all.arp_announce=2 # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.16.1.4/24 dev eth1 2>/dev/null set -e ip addr add 172.16.1.4/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=1 ip link set dev eth1 mtu 1500 ok: [h3] => msg: |- initial configuration for h3 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Send ARP requests from a sane source IP address sysctl -w net.ipv4.conf.all.arp_announce=2 # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.16.2.5/24 dev eth1 2>/dev/null set -e ip addr add 172.16.2.5/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=1 ip link set dev eth1 mtu 1500 ok: [s1] => msg: |- initial configuration for s1 ========================================= hostname s1 ! lldp enable ! ip vrf tenant exit ! ip host s2 10.0.0.2 ! ! default mtu 1532 ! interface mgmt1/1/1 no lldp transmit no lldp receive ! interface loopback0 no shutdown ip address 10.0.0.1/32 no ipv6 enable ! interface ethernet1/1/1 no shutdown no switchport mtu 1632 description "s1 -> s2" ip address 10.1.0.1/30 ip unreachables no ipv6 enable ! interface ethernet1/1/2 no shutdown no switchport description "[Access VLAN red] s1 -> h1" no ipv6 enable ! interface ethernet1/1/3 no shutdown no switchport description "[Access VLAN green] s1 -> h3" no ipv6 enable ! interface virtual-network1000 no shutdown ip vrf forwarding tenant description "VLAN red (1000) -> [h1\\,s2]" ip address 172.16.0.1/24 no ipv6 enable ! interface vlan1002 no shutdown ip vrf forwarding tenant description "VLAN green (1002) -> [h3] [stub]" ip address 172.16.2.1/24 no ipv6 enable ! interface virtual-network1001 no shutdown ip vrf forwarding tenant description "VLAN blue (1001) -> [h2\\,s2]" ip address 172.16.1.1/24 no ipv6 enable ! ok: [s2] => msg: |- initial configuration for s2 ========================================= hostname s2 ! lldp enable ! ip vrf tenant exit ! ip host s1 10.0.0.1 ! ! default mtu 1532 ! interface mgmt1/1/1 no lldp transmit no lldp receive ! interface loopback0 no shutdown ip address 10.0.0.2/32 no ipv6 enable ! interface ethernet1/1/1 no shutdown no switchport mtu 1632 description "s2 -> s1" ip address 10.1.0.2/30 ip unreachables no ipv6 enable ! interface ethernet1/1/2 no shutdown no switchport description "[Access VLAN blue] s2 -> h2" no ipv6 enable ! interface ethernet1/1/3 no shutdown no switchport description "[Access VLAN purple] s2 -> h4" no ipv6 enable ! interface virtual-network1001 no shutdown ip vrf forwarding tenant description "VLAN blue (1001) -> [s1\\,h2]" ip address 172.16.1.2/24 no ipv6 enable ! interface vlan1003 no shutdown ip vrf forwarding tenant description "VLAN purple (1003) -> [h4] [stub]" ip address 172.16.3.2/24 no ipv6 enable ! interface virtual-network1000 no shutdown ip vrf forwarding tenant description "VLAN red (1000) -> [h1\\,s1]" ip address 172.16.0.2/24 no ipv6 enable ! TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/dellos10.yml for s1, s2 included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/linux-clab.yml for h1, h2, h3, h4 TASK [wait_for_connection] ***************************************************** skipping: [s1] skipping: [s2] TASK [dellos10_config: deploying initial from /home/pipi/netlab_gh/netsim/ansible/templates/initial/dellos10.j2, save to startup=yes] *** changed: [s1] changed: [s2] TASK [Define script filename and determine whether to execute in netns] ******** ok: [h1] ok: [h2] ok: [h3] ok: [h4] TASK [Create a temporary file for the rendered script] ************************* changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] TASK [Create container setup script from /home/pipi/netlab_gh/netsim/ansible/templates/initial/linux-clab.j2] *** changed: [h3 -> localhost] changed: [h1 -> localhost] changed: [h4 -> localhost] changed: [h2 -> localhost] TASK [Copy script into running container at /tmp/config-h1_initial.sh] ********* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Execute /tmp/config-h1_initial.sh to deploy initial config based on /home/pipi/netlab_gh/netsim/ansible/templates/initial/linux-clab.j2] *** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Container configuration for initial based on /home/pipi/netlab_gh/netsim/ansible/templates/initial/linux-clab.j2 executed in netns] *** changed: [h4 -> localhost] changed: [h3 -> localhost] changed: [h1 -> localhost] changed: [h2 -> localhost] TASK [Remove temporary file /tmp/h1_initial-yo0xerf3.sh] *********************** changed: [h1 -> localhost] changed: [h4 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, s1, s2 => (item=vlan) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, s1, s2 => (item=routing) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, s1, s2 => (item=ospf) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, s1, s2 => (item=bgp) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, s1, s2 => (item=vrf) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, s1, s2 => (item=vxlan) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, s1, s2 => (item=evpn) TASK [Figure out whether to deploy the module vlan on current device] ********** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Find configuration template for vlan] ************************************ skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [s1] skipping: [s2] TASK [Find configuration deployment deploy_script for vlan] ******************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] => msg: |- vlan configuration for s1 ========================================= interface vlan 1001 description "VLAN blue" exit ! interface vlan 1002 description "VLAN green" exit ! interface vlan 1000 description "VLAN red" exit ! ! interface ethernet1/1/2 switchport mode access switchport access vlan 1000 ! interface ethernet1/1/3 switchport mode access switchport access vlan 1002 ! interface virtual-network1000 ! interface vlan1002 ! interface virtual-network1001 ok: [s2] => msg: |- vlan configuration for s2 ========================================= interface vlan 1001 description "VLAN blue" exit ! interface vlan 1003 description "VLAN purple" exit ! interface vlan 1000 description "VLAN red" exit ! ! interface ethernet1/1/2 switchport mode access switchport access vlan 1001 ! interface ethernet1/1/3 switchport mode access switchport access vlan 1003 ! interface virtual-network1001 ! interface vlan1003 ! interface virtual-network1000 TASK [Deploy vlan configuration] *********************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/dellos10.yml for s1, s2 TASK [wait_for_connection] ***************************************************** skipping: [s1] skipping: [s2] TASK [dellos10_config: deploying vlan from /home/pipi/netlab_gh/netsim/ansible/templates/vlan/dellos10.j2, save to startup=yes] *** changed: [s1] changed: [s2] TASK [Figure out whether to deploy the module routing on current device] ******* ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Find configuration template for routing] ********************************* ok: [h1] ok: [h2] skipping: [s1] ok: [h3] skipping: [s2] ok: [h4] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [s1] skipping: [s2] TASK [Find configuration deployment deploy_script for routing] ***************** skipping: [s1] skipping: [s2] ok: [h1] ok: [h2] ok: [h3] ok: [h4] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [s1] ok: [h1] => msg: |- routing configuration for h1 ========================================= #!/bin/bash # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # # echo Removing existing IPv4 routes while ip route del 172.16.0.0/16 2>/dev/null; do : ; done while ip route del 10.0.0.0/24 2>/dev/null; do : ; done while ip route del 10.1.0.0/16 2>/dev/null; do : ; done while ip route del 10.2.0.0/24 2>/dev/null; do : ; done # # # echo Adding direct static routes ip route add 172.16.0.0/16 via 172.16.0.1 dev eth1 protocol static ip route add 10.0.0.0/24 via 172.16.0.1 dev eth1 protocol static ip route add 10.1.0.0/16 via 172.16.0.1 dev eth1 protocol static ip route add 10.2.0.0/24 via 172.16.0.1 dev eth1 protocol static # # Print the final routing table ip route skipping: [s2] ok: [h2] => msg: |- routing configuration for h2 ========================================= #!/bin/bash # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # # echo Removing existing IPv4 routes while ip route del 172.16.0.0/16 2>/dev/null; do : ; done while ip route del 10.0.0.0/24 2>/dev/null; do : ; done while ip route del 10.1.0.0/16 2>/dev/null; do : ; done while ip route del 10.2.0.0/24 2>/dev/null; do : ; done # # # echo Adding direct static routes ip route add 172.16.0.0/16 via 172.16.1.1 dev eth1 protocol static ip route add 10.0.0.0/24 via 172.16.1.1 dev eth1 protocol static ip route add 10.1.0.0/16 via 172.16.1.1 dev eth1 protocol static ip route add 10.2.0.0/24 via 172.16.1.1 dev eth1 protocol static # # Print the final routing table ip route ok: [h3] => msg: |- routing configuration for h3 ========================================= #!/bin/bash # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # # echo Removing existing IPv4 routes while ip route del 172.16.0.0/16 2>/dev/null; do : ; done while ip route del 10.0.0.0/24 2>/dev/null; do : ; done while ip route del 10.1.0.0/16 2>/dev/null; do : ; done while ip route del 10.2.0.0/24 2>/dev/null; do : ; done # # # echo Adding direct static routes ip route add 172.16.0.0/16 via 172.16.2.1 dev eth1 protocol static ip route add 10.0.0.0/24 via 172.16.2.1 dev eth1 protocol static ip route add 10.1.0.0/16 via 172.16.2.1 dev eth1 protocol static ip route add 10.2.0.0/24 via 172.16.2.1 dev eth1 protocol static # # Print the final routing table ip route ok: [h4] => msg: |- routing configuration for h4 ========================================= #!/bin/bash # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # # echo Removing existing IPv4 routes while ip route del 172.16.0.0/16 2>/dev/null; do : ; done while ip route del 10.0.0.0/24 2>/dev/null; do : ; done while ip route del 10.1.0.0/16 2>/dev/null; do : ; done while ip route del 10.2.0.0/24 2>/dev/null; do : ; done # # # echo Adding direct static routes ip route add 172.16.0.0/16 via 172.16.3.2 dev eth1 protocol static ip route add 10.0.0.0/24 via 172.16.3.2 dev eth1 protocol static ip route add 10.1.0.0/16 via 172.16.3.2 dev eth1 protocol static ip route add 10.2.0.0/24 via 172.16.3.2 dev eth1 protocol static # # Print the final routing table ip route TASK [Deploy routing configuration] ******************************************** skipping: [s1] skipping: [s2] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/linux-clab.yml for h1, h2, h3, h4 TASK [Define script filename and determine whether to execute in netns] ******** ok: [h1] ok: [h2] ok: [h3] ok: [h4] TASK [Create a temporary file for the rendered script] ************************* changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] TASK [Create container setup script from /home/pipi/netlab_gh/netsim/ansible/templates/routing/linux-clab.j2] *** changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h4 -> localhost] changed: [h3 -> localhost] TASK [Copy script into running container at /tmp/config-h1_routing.sh] ********* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Execute /tmp/config-h1_routing.sh to deploy routing config based on /home/pipi/netlab_gh/netsim/ansible/templates/routing/linux-clab.j2] *** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Container configuration for routing based on /home/pipi/netlab_gh/netsim/ansible/templates/routing/linux-clab.j2 executed in netns] *** changed: [h1 -> localhost] changed: [h3 -> localhost] changed: [h2 -> localhost] changed: [h4 -> localhost] TASK [Remove temporary file /tmp/h1_routing-c79qxukz.sh] *********************** changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] TASK [Figure out whether to deploy the module ospf on current device] ********** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Find configuration template for ospf] ************************************ skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [s1] skipping: [s2] TASK [Find configuration deployment deploy_script for ospf] ******************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] => msg: |- ospf configuration for s1 ========================================= router ospf 1 router-id 10.0.0.1 timers lsa arrival 100 timers spf 10 50 500 timers throttle lsa all 100 ! interface loopback0 ip ospf 1 area 0.0.0.0 ip ospf passive ! interface ethernet1/1/1 ! s1 -> s2 ip ospf 1 area 0.0.0.0 ip ospf network point-to-point ! ok: [s2] => msg: |- ospf configuration for s2 ========================================= router ospf 1 router-id 10.0.0.2 timers lsa arrival 100 timers spf 10 50 500 timers throttle lsa all 100 ! interface loopback0 ip ospf 1 area 0.0.0.0 ip ospf passive ! interface ethernet1/1/1 ! s2 -> s1 ip ospf 1 area 0.0.0.0 ip ospf network point-to-point ! TASK [Deploy ospf configuration] *********************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/dellos10.yml for s1, s2 TASK [wait_for_connection] ***************************************************** skipping: [s1] skipping: [s2] TASK [dellos10_config: deploying ospf from /home/pipi/netlab_gh/netsim/ansible/templates/ospf/dellos10.j2, save to startup=yes] *** changed: [s2] changed: [s1] TASK [Figure out whether to deploy the module bgp on current device] *********** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Find configuration template for bgp] ************************************* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [s1] skipping: [s2] TASK [Find configuration deployment deploy_script for bgp] ********************* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] => msg: |- bgp configuration for s1 ========================================= ! router bgp 65000 log-neighbor-changes ! define a generic unnumbered template to be used for eBGP unnumbered... ! additionally, need to define link-local-only-nexthop as per Dell suggested "Cumulus workaround" ! WTF Dell... template unnumbered_ebgp link-local-only-nexthop exit router-id 10.0.0.1 ! neighbor 10.0.0.2 remote-as 65000 description "s2" update-source loopback0 ! address-family ipv4 unicast next-hop-self exit send-community standard send-community extended ! address-family ipv4 unicast soft-reconfiguration inbound activate exit address-family ipv6 unicast no activate exit timers 3 9 advertisement-interval 1 no shutdown exit ! ! address-family ipv4 unicast ! network 10.0.0.1/32 ! ! ! ! ok: [s2] => msg: |- bgp configuration for s2 ========================================= ! router bgp 65000 log-neighbor-changes ! define a generic unnumbered template to be used for eBGP unnumbered... ! additionally, need to define link-local-only-nexthop as per Dell suggested "Cumulus workaround" ! WTF Dell... template unnumbered_ebgp link-local-only-nexthop exit router-id 10.0.0.2 ! neighbor 10.0.0.1 remote-as 65000 description "s1" update-source loopback0 ! address-family ipv4 unicast next-hop-self exit send-community standard send-community extended ! address-family ipv4 unicast soft-reconfiguration inbound activate exit address-family ipv6 unicast no activate exit timers 3 9 advertisement-interval 1 no shutdown exit ! ! address-family ipv4 unicast ! network 10.0.0.2/32 ! ! ! ! TASK [Deploy bgp configuration] ************************************************ skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/dellos10.yml for s1, s2 TASK [wait_for_connection] ***************************************************** skipping: [s1] skipping: [s2] TASK [dellos10_config: deploying bgp from /home/pipi/netlab_gh/netsim/ansible/templates/bgp/dellos10.j2, save to startup=yes] *** changed: [s1] changed: [s2] TASK [Figure out whether to deploy the module vrf on current device] *********** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s2] ok: [s1] TASK [Find configuration template for vrf] ************************************* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [s1] skipping: [s2] TASK [Find configuration deployment deploy_script for vrf] ********************* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] => msg: |- vrf configuration for s1 ========================================= router ospf 100 vrf tenant router-id 10.0.0.1 redistribute bgp 65000 redistribute connected redistribute imported-ospf-routes redistribute l2vpn evpn timers lsa arrival 100 timers spf 10 50 500 timers throttle lsa all 100 ! interface vlan1000 ! VLAN red (1000) -> [h1,s2] ip ospf 100 area 0.0.0.0 ! interface vlan1002 ! VLAN green (1002) -> [h3] ip ospf 100 area 0.0.0.0 ip ospf network point-to-point ip ospf passive ! interface vlan1001 ! VLAN blue (1001) -> [h2,s2] ip ospf 100 area 0.0.0.0 ! exit ! ip vrf tenant ! ! ip route-import|export xxx ip route-import 65000:1 ip route-export 65000:1 ! exit ! router bgp 65000 ! vrf tenant router-id 10.0.0.1 ! need to define unnumbered template also at vrf-level template unnumbered_ebgp link-local-only-nexthop exit ! address-family ipv4 unicast redistribute connected redistribute ospf 100 ok: [s2] => msg: |- vrf configuration for s2 ========================================= router ospf 100 vrf tenant router-id 10.0.0.2 redistribute bgp 65000 redistribute connected redistribute imported-ospf-routes redistribute l2vpn evpn timers lsa arrival 100 timers spf 10 50 500 timers throttle lsa all 100 ! interface vlan1001 ! VLAN blue (1001) -> [s1,h2] ip ospf 100 area 0.0.0.0 ! interface vlan1003 ! VLAN purple (1003) -> [h4] ip ospf 100 area 0.0.0.0 ip ospf network point-to-point ip ospf passive ! interface vlan1000 ! VLAN red (1000) -> [h1,s1] ip ospf 100 area 0.0.0.0 ! exit ! ip vrf tenant ! ! ip route-import|export xxx ip route-import 65000:1 ip route-export 65000:1 ! exit ! router bgp 65000 ! vrf tenant router-id 10.0.0.2 ! need to define unnumbered template also at vrf-level template unnumbered_ebgp link-local-only-nexthop exit ! address-family ipv4 unicast redistribute connected redistribute ospf 100 TASK [Deploy vrf configuration] ************************************************ skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/dellos10.yml for s1, s2 TASK [wait_for_connection] ***************************************************** skipping: [s1] skipping: [s2] TASK [dellos10_config: deploying vrf from /home/pipi/netlab_gh/netsim/ansible/templates/vrf/dellos10.j2, save to startup=yes] *** changed: [s2] changed: [s1] TASK [Figure out whether to deploy the module vxlan on current device] ********* ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Find configuration template for vxlan] *********************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [s1] skipping: [s2] TASK [Find configuration deployment deploy_script for vxlan] ******************* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] => msg: |- vxlan configuration for s1 ========================================= ! First of all, create association VLAN<->Virtual-Network virtual-network 1001 exit clear virtual-network 1001 counters ! interface vlan 1001 description "VLAN blue" virtual-network 1001 exit virtual-network 1000 exit clear virtual-network 1000 counters ! interface vlan 1000 description "VLAN red" virtual-network 1000 exit nve source-interface loopback0 virtual-network 1000 vxlan-vni 21000 virtual-network 1001 vxlan-vni 21001 ok: [s2] => msg: |- vxlan configuration for s2 ========================================= ! First of all, create association VLAN<->Virtual-Network virtual-network 1001 exit clear virtual-network 1001 counters ! interface vlan 1001 description "VLAN blue" virtual-network 1001 exit virtual-network 1000 exit clear virtual-network 1000 counters ! interface vlan 1000 description "VLAN red" virtual-network 1000 exit nve source-interface loopback0 virtual-network 1000 vxlan-vni 21000 virtual-network 1001 vxlan-vni 21001 TASK [Deploy vxlan configuration] ********************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/dellos10.yml for s1, s2 TASK [wait_for_connection] ***************************************************** skipping: [s1] skipping: [s2] TASK [dellos10_config: deploying vxlan from /home/pipi/netlab_gh/netsim/ansible/templates/vxlan/dellos10.j2, save to startup=yes] *** changed: [s2] changed: [s1] TASK [Figure out whether to deploy the module evpn on current device] ********** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Find configuration template for evpn] ************************************ skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [s1] skipping: [s2] TASK [Find configuration deployment deploy_script for evpn] ******************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] => msg: |- evpn configuration for s1 ========================================= ! router bgp 65000 ! neighbor 10.0.0.2 address-family l2vpn evpn activate exit evpn evi 1001 vni 21001 rd 10.0.0.1:1001 route-target 65000:1001 import route-target 65000:1001 export route-target 65000:1001 both evi 1000 vni 21000 rd 10.0.0.1:1000 route-target 65000:1000 import route-target 65000:1000 export route-target 65000:1000 both evpn no arp-nd-suppression disable vrf tenant rd 10.0.0.1:100 route-target 65000:1 import route-target 65000:1 export route-target 65000:1 both advertise ipv4 connected advertise ipv4 static advertise ipv4 ospf advertise ipv4 bgp ! router bgp 65000 vrf tenant address-family ipv4 unicast redistribute l2vpn evpn ! ok: [s2] => msg: |- evpn configuration for s2 ========================================= ! router bgp 65000 ! neighbor 10.0.0.1 address-family l2vpn evpn activate exit evpn evi 1001 vni 21001 rd 10.0.0.2:1001 route-target 65000:1001 import route-target 65000:1001 export route-target 65000:1001 both evi 1000 vni 21000 rd 10.0.0.2:1000 route-target 65000:1000 import route-target 65000:1000 export route-target 65000:1000 both evpn no arp-nd-suppression disable vrf tenant rd 10.0.0.2:100 route-target 65000:1 import route-target 65000:1 export route-target 65000:1 both advertise ipv4 connected advertise ipv4 static advertise ipv4 ospf advertise ipv4 bgp ! router bgp 65000 vrf tenant address-family ipv4 unicast redistribute l2vpn evpn ! TASK [Deploy evpn configuration] *********************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/dellos10.yml for s1, s2 TASK [wait_for_connection] ***************************************************** skipping: [s1] skipping: [s2] TASK [dellos10_config: deploying evpn from /home/pipi/netlab_gh/netsim/ansible/templates/evpn/dellos10.j2, save to startup=yes] *** changed: [s2] changed: [s1] PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* h1 : ok=41 changed=8 unreachable=0 failed=0 skipped=40 rescued=0 ignored=0 h2 : ok=41 changed=8 unreachable=0 failed=0 skipped=40 rescued=0 ignored=0 h3 : ok=41 changed=8 unreachable=0 failed=0 skipped=40 rescued=0 ignored=0 h4 : ok=41 changed=8 unreachable=0 failed=0 skipped=40 rescued=0 ignored=0 s1 : ok=58 changed=7 unreachable=0 failed=0 skipped=23 rescued=0 ignored=0 s2 : ok=58 changed=7 unreachable=0 failed=0 skipped=23 rescued=0 ignored=0 The devices under test are VLAN-to-VXLAN routers using asymmetric IRB with EVPN control plane and running OSPF within the VRF (across VXLAN segments) to exchange information about non-EVPN subnets. All hosts should be able to ping each other