[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned

PLAY [Deploy initial device configuration] *************************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [dut]
ok: [xs]
ok: [h1]
ok: [h3]
ok: [h2]
ok: [h4]

TASK [Find device readiness script] ********************************************
ok: [dut]
ok: [xs]
ok: [h1]
ok: [h2]
ok: [h3]
ok: [h4]

TASK [Wait for device to become ready] *****************************************
skipping: [dut]
skipping: [xs]
skipping: [h1]
skipping: [h2]
skipping: [h3]
skipping: [h4]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, xs, h1, h2, h3, h4

TASK [Figure out whether to deploy the module initial on current device] *******
ok: [dut]
ok: [xs]
ok: [h1]
ok: [h2]
ok: [h3]
ok: [h4]

TASK [Find configuration template for initial] *********************************
ok: [dut]
ok: [xs]
ok: [h1]
ok: [h2]
ok: [h3]
ok: [h4]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => 
  msg: |-
    initial configuration for dut
    =========================================
  
    - set:
        system:
          hostname: dut
        interface:
          eth0:
            ip:
              vrf: mgmt
              address:
                dhcp: {}
            type: eth
          bond1:
            type: bond
            link:
              mtu: 1500
              state:
                up: {}
            description: "dut -> xs"
            bridge:
              domain:
                br_default: {}
  
          swp1:
            type: swp
            link:
              mtu: 1500
              state:
                up: {}
            description: "dut -> xs"
  
          swp2:
            type: swp
            link:
              mtu: 1500
              state:
                up: {}
            description: "dut -> xs"
  
          swp3:
            type: swp
            link:
              mtu: 1500
              state:
                up: {}
            description: "[Access VLAN v1] dut -> h1"
  
          swp4:
            type: swp
            link:
              mtu: 1500
              state:
                up: {}
            description: "[Access VLAN v2] dut -> h3"
  
          vlan1000:
            type: svi
            link:
              state:
                up: {}
            description: "VLAN v1 (1000) -> [h1,xs,h2]"
            ip:
              address:
                172.16.0.5/24: {}
              ipv6:
                enable: off
  
  
          vlan1001:
            type: svi
            link:
              state:
                up: {}
            description: "VLAN v2 (1001) -> [h3,xs,h4]"
            ip:
              address:
                172.16.1.5/24: {}
              ipv6:
                enable: off
  
  
  
    - set:
        interface:
          lo:
            type: loopback
            ip:
              address:
                10.0.0.5/32: {}
              ipv6:
                enable: off
ok: [h1] => 
  msg: |-
    initial configuration for h1
    =========================================
    #!/bin/bash
    #
    # This script contains the 'ip' commands needed to set up container
    # interfaces and route table. It's executed within the container
    # network namespace on the container host.
    #
    #  /etc/hosts file is generated as a clab bind.
    #
    set -e
    ### One-Shot configuration (non-Ubuntu VM or container)
    #
    # Disable IPv4 and IPv6 forwarding
    #
    sysctl -w net.ipv4.ip_forward=0
    sysctl -w net.ipv6.conf.all.forwarding=0
    #
    # Interface addressing
    #
    ip link set dev eth1 up
    set +e
    ip addr del 172.16.0.1/24 dev eth1 2>/dev/null
    set -e
    ip addr add 172.16.0.1/24 dev eth1
    ip link set eth1 mtu 1500
    #
    # Add routes to IPv4 address pools pointing to the first neighbor on the first link
    #
    # If you need anything better, use FRR instead of Linux and start routing (or use IPv6)
    #
    # lan prefix: 172.16.0.0/16 local subnet: 172.16.0.0/24
    set +e
    ip route del 172.16.0.0/16 2>/dev/null
    set -e
    ip route add 172.16.0.0/16 via 172.16.0.5
    # loopback prefix: 10.0.0.0/24 local subnet: 172.16.0.0/24
    set +e
    ip route del 10.0.0.0/24 2>/dev/null
    set -e
    ip route add 10.0.0.0/24 via 172.16.0.5
    # mgmt prefix: 192.168.17.0/24 local subnet: 172.16.0.0/24
    # p2p prefix: 10.1.0.0/16 local subnet: 172.16.0.0/24
    set +e
    ip route del 10.1.0.0/16 2>/dev/null
    set -e
    ip route add 10.1.0.0/16 via 172.16.0.5
    # router_id prefix: 10.0.0.0/24 local subnet: 172.16.0.0/24
    # vrf_loopback prefix: 10.2.0.0/24 local subnet: 172.16.0.0/24
    set +e
    ip route del 10.2.0.0/24 2>/dev/null
    set -e
    ip route add 10.2.0.0/24 via 172.16.0.5
    #
    # Print the final routing table
    ip route
ok: [xs] => 
  msg: |-
    initial configuration for xs
    =========================================
    #!/bin/bash
    #
    set -e
    set -x
    #
    # Create bash profile script
    #
    cat <<SCRIPT >/root/.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)#"
    echo "Use vtysh to connect to FRR daemon"
    echo
    SCRIPT
    cat <<SCRIPT >.bash_profile
    #!/bin/bash
    #
    export PS1="\h(bash)#"
    echo "Use sudo vtysh to connect to FRR daemon"
    echo
    SCRIPT
    #
    # Build hosts file
    #
    #
    cat <<SCRIPT >/tmp/hosts
    #
    # Created by netlab initial
    #
    10.0.0.5 dut
    172.16.0.5 vlan1000.dut
    172.16.1.5 vlan1001.dut
    10.0.0.6 xs
    172.16.0.6 vlan1000.xs
    172.16.1.6 vlan1001.xs
    172.16.0.1 h1 eth1.h1
    172.16.0.2 h2 eth1.h2
    172.16.1.3 h3 eth1.h3
    172.16.1.4 h4 eth1.h4
    SCRIPT
    grep "Created by netlab" /etc/hosts || uniq /tmp/hosts >>/etc/hosts
    #
    # Configure system defaults on Ubuntu
    #
    hostnamectl set-hostname xs
    sysctl -w net.ipv4.ip_forward=1
    sysctl -w net.ipv6.conf.all.forwarding=1
    #
    # Install FRR on a Ubuntu VM if needed
    #
    if which /usr/lib/frr/frrinit.sh; then
      echo "FRR already installed, skipping installation"
    else
      curl -s https://deb.frrouting.org/frr/keys.asc | apt-key add -
      FRRVER="frr-stable"
      echo deb https://deb.frrouting.org/frr $(lsb_release -s -c) $FRRVER > /etc/apt/sources.list.d/frr.list
      apt-get update -qq && apt-get install -qq frr frr-pythontools bridge-utils
    fi
    #
    # Enable FRR modules (if not using containerlab bind-mounted /etc/frr/daemons)
    #
    #
    # Enable FRR daemons
    #
  
    /usr/lib/frr/frrinit.sh restart
  
    #
    # Create loopbacks and stub devices
    #
    if [ ! -e /sys/class/net/lo ]; then
      if [ ! -e /sys/devices/virtual/net/lo ]; then
        ip link add lo type dummy
        ip link set dev lo up
      fi
    fi
  
    # Disable IPv6 (for IPv4-only interfaces) or SLAAC (if the device is a router)
    #
    sysctl -qw net.ipv6.conf.eth1.disable_ipv6=1
    sysctl -qw net.ipv6.conf.eth2.disable_ipv6=1
    sysctl -qw net.ipv6.conf.eth3.disable_ipv6=1
    sysctl -qw net.ipv6.conf.eth4.disable_ipv6=1
  
    #
    # Add vtysh.conf file
    echo "service integrated-vtysh-config" >/etc/frr/vtysh.conf
    #
    # Set Ethernet interface MTU
  
    #
    # Rest of initial configuration done through VTYSH
    #
    cat >/tmp/config <<CONFIG
    hostname xs
    !
    frr defaults datacenter
    !
    interface lo
     no shutdown
     ip address 10.0.0.6/32
    !
    interface bond1
     no shutdown
     description xs -> dut
     ! no ip address
    !
    interface eth1
     no shutdown
     description xs -> dut
     ! no ip address
    !
    interface eth2
     no shutdown
     description xs -> dut
     ! no ip address
    !
    interface eth3
     no shutdown
     description [Access VLAN v1] xs -> h2
     ! no ip address
    !
    interface eth4
     no shutdown
     description [Access VLAN v2] xs -> h4
     ! no ip address
    !
    interface bond1.1000
     no shutdown
     description [SubIf VLAN v1] xs -> dut
     ! no ip address
    !
    interface bond1.1001
     no shutdown
     description [SubIf VLAN v2] xs -> dut
     ! no ip address
    !
    interface vlan1000
     no shutdown
     description VLAN v1 (1000) -> [h1,dut,h2]
     ip address 172.16.0.6/24
    !
    interface vlan1001
     no shutdown
     description VLAN v2 (1001) -> [h3,dut,h4]
     ip address 172.16.1.6/24
    !
    do write
    CONFIG
    vtysh -f /tmp/config
    exit 0
ok: [h4] => 
  msg: |-
    initial configuration for h4
    =========================================
    #!/bin/bash
    #
    # This script contains the 'ip' commands needed to set up container
    # interfaces and route table. It's executed within the container
    # network namespace on the container host.
    #
    #  /etc/hosts file is generated as a clab bind.
    #
    set -e
    ### One-Shot configuration (non-Ubuntu VM or container)
    #
    # Disable IPv4 and IPv6 forwarding
    #
    sysctl -w net.ipv4.ip_forward=0
    sysctl -w net.ipv6.conf.all.forwarding=0
    #
    # Interface addressing
    #
    ip link set dev eth1 up
    set +e
    ip addr del 172.16.1.4/24 dev eth1 2>/dev/null
    set -e
    ip addr add 172.16.1.4/24 dev eth1
    ip link set eth1 mtu 1500
    #
    # Add routes to IPv4 address pools pointing to the first neighbor on the first link
    #
    # If you need anything better, use FRR instead of Linux and start routing (or use IPv6)
    #
    # lan prefix: 172.16.0.0/16 local subnet: 172.16.1.0/24
    set +e
    ip route del 172.16.0.0/16 2>/dev/null
    set -e
    ip route add 172.16.0.0/16 via 172.16.1.6
    # loopback prefix: 10.0.0.0/24 local subnet: 172.16.1.0/24
    set +e
    ip route del 10.0.0.0/24 2>/dev/null
    set -e
    ip route add 10.0.0.0/24 via 172.16.1.6
    # mgmt prefix: 192.168.17.0/24 local subnet: 172.16.1.0/24
    # p2p prefix: 10.1.0.0/16 local subnet: 172.16.1.0/24
    set +e
    ip route del 10.1.0.0/16 2>/dev/null
    set -e
    ip route add 10.1.0.0/16 via 172.16.1.6
    # router_id prefix: 10.0.0.0/24 local subnet: 172.16.1.0/24
    # vrf_loopback prefix: 10.2.0.0/24 local subnet: 172.16.1.0/24
    set +e
    ip route del 10.2.0.0/24 2>/dev/null
    set -e
    ip route add 10.2.0.0/24 via 172.16.1.6
    #
    # Print the final routing table
    ip route
ok: [h3] => 
  msg: |-
    initial configuration for h3
    =========================================
    #!/bin/bash
    #
    # This script contains the 'ip' commands needed to set up container
    # interfaces and route table. It's executed within the container
    # network namespace on the container host.
    #
    #  /etc/hosts file is generated as a clab bind.
    #
    set -e
    ### One-Shot configuration (non-Ubuntu VM or container)
    #
    # Disable IPv4 and IPv6 forwarding
    #
    sysctl -w net.ipv4.ip_forward=0
    sysctl -w net.ipv6.conf.all.forwarding=0
    #
    # Interface addressing
    #
    ip link set dev eth1 up
    set +e
    ip addr del 172.16.1.3/24 dev eth1 2>/dev/null
    set -e
    ip addr add 172.16.1.3/24 dev eth1
    ip link set eth1 mtu 1500
    #
    # Add routes to IPv4 address pools pointing to the first neighbor on the first link
    #
    # If you need anything better, use FRR instead of Linux and start routing (or use IPv6)
    #
    # lan prefix: 172.16.0.0/16 local subnet: 172.16.1.0/24
    set +e
    ip route del 172.16.0.0/16 2>/dev/null
    set -e
    ip route add 172.16.0.0/16 via 172.16.1.5
    # loopback prefix: 10.0.0.0/24 local subnet: 172.16.1.0/24
    set +e
    ip route del 10.0.0.0/24 2>/dev/null
    set -e
    ip route add 10.0.0.0/24 via 172.16.1.5
    # mgmt prefix: 192.168.17.0/24 local subnet: 172.16.1.0/24
    # p2p prefix: 10.1.0.0/16 local subnet: 172.16.1.0/24
    set +e
    ip route del 10.1.0.0/16 2>/dev/null
    set -e
    ip route add 10.1.0.0/16 via 172.16.1.5
    # router_id prefix: 10.0.0.0/24 local subnet: 172.16.1.0/24
    # vrf_loopback prefix: 10.2.0.0/24 local subnet: 172.16.1.0/24
    set +e
    ip route del 10.2.0.0/24 2>/dev/null
    set -e
    ip route add 10.2.0.0/24 via 172.16.1.5
    #
    # Print the final routing table
    ip route
ok: [h2] => 
  msg: |-
    initial configuration for h2
    =========================================
    #!/bin/bash
    #
    # This script contains the 'ip' commands needed to set up container
    # interfaces and route table. It's executed within the container
    # network namespace on the container host.
    #
    #  /etc/hosts file is generated as a clab bind.
    #
    set -e
    ### One-Shot configuration (non-Ubuntu VM or container)
    #
    # Disable IPv4 and IPv6 forwarding
    #
    sysctl -w net.ipv4.ip_forward=0
    sysctl -w net.ipv6.conf.all.forwarding=0
    #
    # Interface addressing
    #
    ip link set dev eth1 up
    set +e
    ip addr del 172.16.0.2/24 dev eth1 2>/dev/null
    set -e
    ip addr add 172.16.0.2/24 dev eth1
    ip link set eth1 mtu 1500
    #
    # Add routes to IPv4 address pools pointing to the first neighbor on the first link
    #
    # If you need anything better, use FRR instead of Linux and start routing (or use IPv6)
    #
    # lan prefix: 172.16.0.0/16 local subnet: 172.16.0.0/24
    set +e
    ip route del 172.16.0.0/16 2>/dev/null
    set -e
    ip route add 172.16.0.0/16 via 172.16.0.6
    # loopback prefix: 10.0.0.0/24 local subnet: 172.16.0.0/24
    set +e
    ip route del 10.0.0.0/24 2>/dev/null
    set -e
    ip route add 10.0.0.0/24 via 172.16.0.6
    # mgmt prefix: 192.168.17.0/24 local subnet: 172.16.0.0/24
    # p2p prefix: 10.1.0.0/16 local subnet: 172.16.0.0/24
    set +e
    ip route del 10.1.0.0/16 2>/dev/null
    set -e
    ip route add 10.1.0.0/16 via 172.16.0.6
    # router_id prefix: 10.0.0.0/24 local subnet: 172.16.0.0/24
    # vrf_loopback prefix: 10.2.0.0/24 local subnet: 172.16.0.0/24
    set +e
    ip route del 10.2.0.0/24 2>/dev/null
    set -e
    ip route add 10.2.0.0/24 via 172.16.0.6
    #
    # Print the final routing table
    ip route

TASK [Find configuration deployment deploy_script for initial] *****************
ok: [dut]
ok: [xs]
ok: [h1]
ok: [h2]
ok: [h4]
ok: [h3]

TASK [Deploy initial configuration] ********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/cumulus_nvue.yml for dut
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/frr.yml for xs
included: /home/pipi/net101/tools/netsim/ansible/tasks/linux/initial-clab.yml for h1, h2, h3, h4

TASK [set_fact] ****************************************************************
ok: [dut]

TASK [copy the cumulus nvue YAML initial config file to switch (generated from /home/pipi/net101/tools/netsim/ansible/templates/initial/cumulus_nvue.j2)] ***
changed: [dut]

TASK [Wait for nvued to start] *************************************************
ok: [dut]

TASK [set_fact] ****************************************************************
ok: [dut]

TASK [execute on cumulus: 'nv config patch' for initial config] ****************
changed: [dut]

TASK [execute on cumulus: 'nv config apply -y' for initial config] *************
changed: [dut]

TASK [template] ****************************************************************
changed: [xs]

TASK [set_fact] ****************************************************************
ok: [xs]

TASK [run /tmp/config.sh to deploy initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/frr.j2] ***
changed: [xs]

TASK [run vtysh to import initial config from /home/pipi/net101/tools/netsim/ansible/templates/initial/frr.j2] ***
skipping: [xs]

TASK [set_fact] ****************************************************************
ok: [h1]
ok: [h2]
ok: [h3]
ok: [h4]

TASK [Create initial container setup from /home/pipi/net101/tools/netsim/ansible/templates/initial/linux-clab.j2] ***
changed: [h1 -> localhost]
changed: [h3 -> localhost]
changed: [h2 -> localhost]
changed: [h4 -> localhost]

TASK [Initial container configuration via /tmp/config-PTSMPitr-h1.sh] **********
changed: [h1 -> localhost]
changed: [h2 -> localhost]
changed: [h3 -> localhost]
changed: [h4 -> localhost]

TASK [file] ********************************************************************
changed: [h2 -> localhost]
changed: [h3 -> localhost]
changed: [h4 -> localhost]
changed: [h1 -> localhost]

PLAY [Deploy module-specific configurations] ***********************************

TASK [Set variables that cannot be set with VARS] ******************************
ok: [dut]
ok: [xs]

TASK [Deploy individual configuration modules] *********************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, xs => (item=lag)
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-module.yml for dut, xs => (item=vlan)

TASK [Figure out whether to deploy the module lag on current device] ***********
ok: [dut]
ok: [xs]

TASK [Find configuration template for lag] *************************************
ok: [dut]
ok: [xs]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [dut] => 
  msg: |-
    lag configuration for dut
    =========================================
    - set:
        interface:
          bond1:
            bond:
              lacp-rate: slow
              member:
                swp1: {}
                swp2: {}
ok: [xs] => 
  msg: |-
    lag configuration for xs
    =========================================
    #!/bin/bash
    #
    set -e # Exit immediately when any command fails
    #
    modprobe bonding miimon=100 mode=802.3ad lacp_rate=fast
    #
    # Create bonds for LAGs, if any. Requires kernel bonding module loaded
    #
    ip link add dev bond1 type bond mode 802.3ad xmit_hash_policy encap3+4 lacp_rate slow
    ip link set dev bond1 down
    ip link set dev eth1 down
    ip link set dev eth2 down
  
    ethtool -s eth1 autoneg off speed 1000 duplex full
    ip link set dev eth1 master bond1
    ip link set dev eth1 up
    ethtool -s eth2 autoneg off speed 1000 duplex full
    ip link set dev eth2 master bond1
    ip link set dev eth2 up
    ip link set dev bond1 up
    exit 0

TASK [Find configuration deployment deploy_script for lag] *********************
ok: [dut]
ok: [xs]

TASK [Deploy lag configuration] ************************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/cumulus_nvue.yml for dut
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/frr.yml for xs

TASK [set_fact] ****************************************************************
ok: [dut]

TASK [copy the cumulus nvue YAML lag config file to switch (generated from /home/pipi/net101/tools/netsim/ansible/templates/lag/cumulus_nvue.j2)] ***
changed: [dut]

TASK [Wait for nvued to start] *************************************************
skipping: [dut]

TASK [set_fact] ****************************************************************
ok: [dut]

TASK [execute on cumulus: 'nv config patch' for lag config] ********************
changed: [dut]

TASK [execute on cumulus: 'nv config apply -y' for lag config] *****************
changed: [dut]

TASK [template] ****************************************************************
changed: [xs]

TASK [set_fact] ****************************************************************
ok: [xs]

TASK [run /tmp/config.sh to deploy lag config from /home/pipi/net101/tools/netsim/ansible/templates/lag/frr.j2] ***
changed: [xs]

TASK [run vtysh to import lag config from /home/pipi/net101/tools/netsim/ansible/templates/lag/frr.j2] ***
skipping: [xs]

TASK [Figure out whether to deploy the module vlan on current device] **********
ok: [dut]
ok: [xs]

TASK [Find configuration template for vlan] ************************************
ok: [dut]
ok: [xs]

TASK [Print deployed configuration when running in verbose mode] ***************
ok: [xs] => 
  msg: |-
    vlan configuration for xs
    =========================================
    #!/bin/bash
    #
    set -e # Exit immediately when any command fails
    #
    if [ ! -e /sys/devices/virtual/net/bond1.1000 ]; then
      ip link add link bond1 name bond1.1000 type vlan id 1000
      ip link set dev bond1.1000 up
    fi
    if [ ! -e /sys/devices/virtual/net/bond1.1001 ]; then
      ip link add link bond1 name bond1.1001 type vlan id 1001
      ip link set dev bond1.1001 up
    fi
    if [ ! -e /sys/devices/virtual/net/vlan1000 ]; then
      brctl addbr vlan1000
  
  
      ip link set dev vlan1000 up
      ip addr flush dev vlan1000
      ip addr add 172.16.0.6/24 dev vlan1000
    fi
    if [ ! -e /sys/devices/virtual/net/vlan1001 ]; then
      brctl addbr vlan1001
  
  
      ip link set dev vlan1001 up
      ip addr flush dev vlan1001
      ip addr add 172.16.1.6/24 dev vlan1001
    fi
  
    brctl addif vlan1000 eth3
    brctl addif vlan1001 eth4
    brctl addif vlan1000 bond1.1000
    brctl addif vlan1001 bond1.1001
    exit 0
ok: [dut] => 
  msg: |-
    vlan configuration for dut
    =========================================
    - set:
        bridge:
          domain:
            br_default:
              mac-address: "08:4f:c2:a9:00:05" # The default 'auto' setting picks the same MAC for multiple instances!
              untagged: 1
              vlan:
                '1000': {}
                '1001': {}
  
        interface:
         bond1:
            bridge:
              domain:
                br_default: {}
         swp3:
            bridge:
              domain:
                br_default:
                  access: 1000
         swp4:
            bridge:
              domain:
                br_default:
                  access: 1001

TASK [Find configuration deployment deploy_script for vlan] ********************
ok: [dut]
ok: [xs]

TASK [Deploy vlan configuration] ***********************************************
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/cumulus_nvue.yml for dut
included: /home/pipi/net101/tools/netsim/ansible/tasks/deploy-config/frr.yml for xs

TASK [set_fact] ****************************************************************
ok: [dut]

TASK [copy the cumulus nvue YAML vlan config file to switch (generated from /home/pipi/net101/tools/netsim/ansible/templates/vlan/cumulus_nvue.j2)] ***
changed: [dut]

TASK [Wait for nvued to start] *************************************************
skipping: [dut]

TASK [set_fact] ****************************************************************
ok: [dut]

TASK [execute on cumulus: 'nv config patch' for vlan config] *******************
changed: [dut]

TASK [execute on cumulus: 'nv config apply -y' for vlan config] ****************
changed: [dut]

TASK [template] ****************************************************************
changed: [xs]

TASK [set_fact] ****************************************************************
ok: [xs]

TASK [run /tmp/config.sh to deploy vlan config from /home/pipi/net101/tools/netsim/ansible/templates/vlan/frr.j2] ***
changed: [xs]

TASK [run vtysh to import vlan config from /home/pipi/net101/tools/netsim/ansible/templates/vlan/frr.j2] ***
skipping: [xs]

PLAY [Deploy custom deployment templates] **************************************
skipping: no hosts matched

PLAY RECAP *********************************************************************
dut                        : ok=37   changed=9    unreachable=0    failed=0    skipped=3    rescued=0    ignored=0   
h1                         : ok=12   changed=3    unreachable=0    failed=0    skipped=1    rescued=0    ignored=0   
h2                         : ok=12   changed=3    unreachable=0    failed=0    skipped=1    rescued=0    ignored=0   
h3                         : ok=12   changed=3    unreachable=0    failed=0    skipped=1    rescued=0    ignored=0   
h4                         : ok=12   changed=3    unreachable=0    failed=0    skipped=1    rescued=0    ignored=0   
xs                         : ok=30   changed=6    unreachable=0    failed=0    skipped=4    rescued=0    ignored=0   



The device under test is a layer-2 switch connected with a LAG VLAN trunk to
another layer-2 switch. Host in the same VLAN should be able to ping each
other.