[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned [WARNING]: Found variable using reserved name: hosts PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [r1] ok: [r2] ok: [r3] ok: [r4] ok: [dut] TASK [Generic readiness tests] ************************************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/readiness-check/ssh.yml for r1, r2, r3, r4, dut => (item=ssh) TASK [Check if 'sshpass' is installed] ***************************************** ok: [r1 -> localhost] TASK [Check for 'timeout' command] ********************************************* ok: [r1 -> localhost] ok: [r2 -> localhost] ok: [r3 -> localhost] ok: [r4 -> localhost] ok: [dut -> localhost] TASK [Execute local ssh command to check ssh readiness] ************************ FAILED - RETRYING: [r1 -> localhost]: Execute local ssh command to check ssh readiness (20 retries left). FAILED - RETRYING: [r2 -> localhost]: Execute local ssh command to check ssh readiness (20 retries left). FAILED - RETRYING: [r3 -> localhost]: Execute local ssh command to check ssh readiness (20 retries left). FAILED - RETRYING: [r4 -> localhost]: Execute local ssh command to check ssh readiness (20 retries left). FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (50 retries left). ok: [r1 -> localhost] ok: [r2 -> localhost] ok: [r3 -> localhost] ok: [r4 -> localhost] FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (49 retries left). FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (48 retries left). FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (47 retries left). FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (46 retries left). FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (45 retries left). FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (44 retries left). FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (43 retries left). FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (42 retries left). FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (41 retries left). FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (40 retries left). FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (39 retries left). FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (38 retries left). FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (37 retries left). FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (36 retries left). FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (35 retries left). FAILED - RETRYING: [dut -> localhost]: Execute local ssh command to check ssh readiness (34 retries left). ok: [dut -> localhost] TASK [Confirm r1 SSH server works] ********************************************* ok: [r1] => msg: Node r1 is ready. ok: [r2] => msg: Node r2 is ready. ok: [r3] => msg: Node r3 is ready. ok: [r4] => msg: Node r4 is ready. ok: [dut] => msg: Node dut is ready. TASK [Find device readiness script] ******************************************** ok: [r1] ok: [r2] ok: [r3] ok: [r4] ok: [dut] TASK [Wait for device to become ready] ***************************************** skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] skipping: [dut] TASK [Normalize config on bridge-like devices] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1, r2, r3, r4, dut TASK [Figure out whether to deploy the module normalize on current device] ***** ok: [r1] ok: [r2] ok: [r3] ok: [r4] ok: [dut] TASK [Find configuration template for normalize] ******************************* ok: [r1] ok: [r2] ok: [r3] ok: [r4] ok: [dut] TASK [fail] ******************************************************************** skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] skipping: [dut] TASK [Find configuration deployment deploy_script for normalize] *************** ok: [r1] ok: [r2] ok: [r3] ok: [dut] ok: [r4] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [dut] ok: [r1] => msg: |- normalize configuration for r1 ========================================= ! interface Ethernet1 shutdown ok: [r2] => msg: |- normalize configuration for r2 ========================================= ! interface Ethernet1 shutdown ok: [r4] => msg: |- normalize configuration for r4 ========================================= ! interface Ethernet1 shutdown ok: [r3] => msg: |- normalize configuration for r3 ========================================= ! interface Ethernet1 shutdown TASK [Deploy normalize configuration] ****************************************** skipping: [dut] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for r1, r2, r3, r4 TASK [eos_config: deploying normalize from /home/pipi/netlab_gh/netsim/ansible/templates/normalize/eos.j2] *** [WARNING]: To ensure idempotency and correct diff the input configuration lines should be similar to how they appear if present in the running configuration on device including the indentation changed: [r1] changed: [r3] changed: [r4] changed: [r2] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1, r2, r3, r4, dut TASK [Figure out whether to deploy the module initial on current device] ******* ok: [r1] ok: [r2] ok: [r3] ok: [r4] ok: [dut] TASK [Find configuration template for initial] ********************************* ok: [r1] ok: [r2] ok: [r3] ok: [r4] ok: [dut] TASK [fail] ******************************************************************** skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] skipping: [dut] TASK [Find configuration deployment deploy_script for initial] ***************** ok: [r1] ok: [r3] ok: [r4] ok: [r2] ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** ok: [r1] => msg: |- initial configuration for r1 ========================================= hostname r1 ! logging monitor debugging aaa authorization exec default local ! lldp run ip routing ipv6 unicast-routing ! ! ip host r2 10.0.0.12 10.1.0.6 ip host r3 10.0.0.23 10.1.0.10 ip host r4 10.0.0.24 10.1.0.14 ip host dut 10.0.0.1 ip host dut-red 10.1.0.1 10.1.0.5 ip host dut-blue 10.1.0.9 10.1.0.13 ipv6 host r2 2001:db8:1:c::1 ipv6 host r3 2001:db8:1:17::1 ipv6 host r4 2001:db8:1:18::1 ipv6 host dut 2001:db8:1:1::1 ! interface Management0 no lldp transmit no lldp receive ! interface Loopback0 ip address 10.0.0.11/32 ipv6 nd ra interval 5 ipv6 address 2001:db8:1:b::1/64 ! interface Ethernet1 no switchport platform tfa phy control-frame disabled description r1 -> dut [external] ip address 10.1.0.2/30 mac-address caf0.000b.0001 ! no shutdown ! ok: [r3] => msg: |- initial configuration for r3 ========================================= hostname r3 ! logging monitor debugging aaa authorization exec default local ! lldp run ip routing ipv6 unicast-routing ! ! ip host r1 10.0.0.11 10.1.0.2 ip host r2 10.0.0.12 10.1.0.6 ip host r4 10.0.0.24 10.1.0.14 ip host dut 10.0.0.1 ip host dut-red 10.1.0.1 10.1.0.5 ip host dut-blue 10.1.0.9 10.1.0.13 ipv6 host r1 2001:db8:1:b::1 ipv6 host r2 2001:db8:1:c::1 ipv6 host r4 2001:db8:1:18::1 ipv6 host dut 2001:db8:1:1::1 ! interface Management0 no lldp transmit no lldp receive ! interface Loopback0 ip address 10.0.0.23/32 ipv6 nd ra interval 5 ipv6 address 2001:db8:1:17::1/64 ! interface Ethernet1 no switchport platform tfa phy control-frame disabled description r3 -> dut [external] ip address 10.1.0.10/30 mac-address caf0.0017.0001 ! no shutdown ! ok: [r4] => msg: |- initial configuration for r4 ========================================= hostname r4 ! logging monitor debugging aaa authorization exec default local ! lldp run ip routing ipv6 unicast-routing ! ! ip host r1 10.0.0.11 10.1.0.2 ip host r2 10.0.0.12 10.1.0.6 ip host r3 10.0.0.23 10.1.0.10 ip host dut 10.0.0.1 ip host dut-red 10.1.0.1 10.1.0.5 ip host dut-blue 10.1.0.9 10.1.0.13 ipv6 host r1 2001:db8:1:b::1 ipv6 host r2 2001:db8:1:c::1 ipv6 host r3 2001:db8:1:17::1 ipv6 host dut 2001:db8:1:1::1 ! interface Management0 no lldp transmit no lldp receive ! interface Loopback0 ip address 10.0.0.24/32 ipv6 nd ra interval 5 ipv6 address 2001:db8:1:18::1/64 ! interface Ethernet1 no switchport platform tfa phy control-frame disabled description r4 -> dut [external] ip address 10.1.0.14/30 mac-address caf0.0018.0001 ! no shutdown ! ok: [r2] => msg: |- initial configuration for r2 ========================================= hostname r2 ! logging monitor debugging aaa authorization exec default local ! lldp run ip routing ipv6 unicast-routing ! ! ip host r1 10.0.0.11 10.1.0.2 ip host r3 10.0.0.23 10.1.0.10 ip host r4 10.0.0.24 10.1.0.14 ip host dut 10.0.0.1 ip host dut-red 10.1.0.1 10.1.0.5 ip host dut-blue 10.1.0.9 10.1.0.13 ipv6 host r1 2001:db8:1:b::1 ipv6 host r3 2001:db8:1:17::1 ipv6 host r4 2001:db8:1:18::1 ipv6 host dut 2001:db8:1:1::1 ! interface Management0 no lldp transmit no lldp receive ! interface Loopback0 ip address 10.0.0.12/32 ipv6 nd ra interval 5 ipv6 address 2001:db8:1:c::1/64 ! interface Ethernet1 no switchport platform tfa phy control-frame disabled description r2 -> dut [external] ip address 10.1.0.6/30 mac-address caf0.000c.0001 ! no shutdown ! ok: [dut] => msg: |- initial configuration for dut ========================================= hostname dut ! domain lookup disable ! lldp no management enable ! domain ipv4 host r1 10.0.0.11 domain ipv4 host r2 10.0.0.12 domain ipv4 host r3 10.0.0.23 domain ipv4 host r4 10.0.0.24 domain ipv6 host r1 2001:db8:1:b::1 domain ipv6 host r2 2001:db8:1:c::1 domain ipv6 host r3 2001:db8:1:17::1 domain ipv6 host r4 2001:db8:1:18::1 ! interface Loopback0 no shutdown ipv4 address 10.0.0.1 255.255.255.255 ipv6 address 2001:db8:1:1::1/64 ! interface FourHundredGigE0/0/0/0 no shutdown description dut -> r1 [external] ipv4 address 10.1.0.1 255.255.255.252 ! interface FourHundredGigE0/0/0/1 no shutdown description dut -> r2 [external] ipv4 address 10.1.0.5 255.255.255.252 ! interface FourHundredGigE0/0/0/2 no shutdown description dut -> r3 [external] ipv4 address 10.1.0.9 255.255.255.252 ! interface FourHundredGigE0/0/0/3 no shutdown description dut -> r4 [external] ipv4 address 10.1.0.13 255.255.255.252 ! TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for r1, r2, r3, r4 included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/iosxr.yml for dut TASK [eos_config: deploying initial from /home/pipi/netlab_gh/netsim/ansible/templates/initial/eos.j2] *** changed: [r3] changed: [r4] changed: [r2] changed: [r1] TASK [iosxr_config: deploying initial from /home/pipi/netlab_gh/netsim/ansible/templates/initial/iosxr.j2] *** changed: [dut] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [r1] ok: [r2] ok: [r3] ok: [r4] ok: [dut] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1, r2, r3, r4, dut => (item=bgp) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for r1, r2, r3, r4, dut => (item=vrf) TASK [Figure out whether to deploy the module bgp on current device] *********** ok: [r1] ok: [r2] ok: [r3] ok: [r4] ok: [dut] TASK [Find configuration template for bgp] ************************************* ok: [r1] ok: [r3] ok: [r2] ok: [r4] ok: [dut] TASK [fail] ******************************************************************** skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] skipping: [dut] TASK [Find configuration deployment deploy_script for bgp] ********************* ok: [r1] ok: [r2] ok: [r4] ok: [r3] ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** ok: [r3] => msg: |- bgp configuration for r3 ========================================= ! ! router bgp 65103 bgp advertise-inactive bgp log-neighbor-changes no bgp default ipv4-unicast no bgp default ipv6-unicast router-id 10.0.0.23 ! neighbor 10.1.0.9 remote-as 65000 neighbor 10.1.0.9 description dut neighbor 10.1.0.9 send-community standard large ! ! address-family ipv4 ! ! ! Originate networks from connected subnets ! network 10.0.0.23/32 ! ! neighbor 10.1.0.9 activate neighbor 10.1.0.9 next-hop-self ! address-family ipv6 ! ! ! Originate networks from connected subnets ! network 2001:db8:1:17::/64 ! ! ! ok: [r1] => msg: |- bgp configuration for r1 ========================================= ! ! router bgp 65101 bgp advertise-inactive bgp log-neighbor-changes no bgp default ipv4-unicast no bgp default ipv6-unicast router-id 10.0.0.11 ! neighbor 10.1.0.1 remote-as 65000 neighbor 10.1.0.1 description dut neighbor 10.1.0.1 send-community standard large ! ! address-family ipv4 ! ! ! Originate networks from connected subnets ! network 10.0.0.11/32 ! ! neighbor 10.1.0.1 activate neighbor 10.1.0.1 next-hop-self ! address-family ipv6 ! ! ! Originate networks from connected subnets ! network 2001:db8:1:b::/64 ! ! ! ok: [r2] => msg: |- bgp configuration for r2 ========================================= ! ! router bgp 65102 bgp advertise-inactive bgp log-neighbor-changes no bgp default ipv4-unicast no bgp default ipv6-unicast router-id 10.0.0.12 ! neighbor 10.1.0.5 remote-as 65000 neighbor 10.1.0.5 description dut neighbor 10.1.0.5 send-community standard large ! ! address-family ipv4 ! ! ! Originate networks from connected subnets ! network 10.0.0.12/32 ! ! neighbor 10.1.0.5 activate neighbor 10.1.0.5 next-hop-self ! address-family ipv6 ! ! ! Originate networks from connected subnets ! network 2001:db8:1:c::/64 ! ! ! ok: [r4] => msg: |- bgp configuration for r4 ========================================= ! ! router bgp 65104 bgp advertise-inactive bgp log-neighbor-changes no bgp default ipv4-unicast no bgp default ipv6-unicast router-id 10.0.0.24 ! neighbor 10.1.0.13 remote-as 65000 neighbor 10.1.0.13 description dut neighbor 10.1.0.13 send-community standard large ! ! address-family ipv4 ! ! ! Originate networks from connected subnets ! network 10.0.0.24/32 ! ! neighbor 10.1.0.13 activate neighbor 10.1.0.13 next-hop-self ! address-family ipv6 ! ! ! Originate networks from connected subnets ! network 2001:db8:1:18::/64 ! ! ! ok: [dut] => msg: |- bgp configuration for dut ========================================= ! ! router bgp 65000 bgp unsafe-ebgp-policy bgp scan-time 5 bgp update-delay 5 bgp router-id 10.0.0.1 ! address-family ipv4 unicast bgp scan-time 5 ! network 10.0.0.1/32 ! ! address-family ipv6 unicast bgp scan-time 5 ! network 2001:db8:1:1::/64 ! TASK [Deploy bgp configuration] ************************************************ included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for r1, r2, r3, r4 included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/iosxr.yml for dut TASK [eos_config: deploying bgp from /home/pipi/netlab_gh/netsim/ansible/templates/bgp/eos.j2] *** changed: [r4] changed: [r1] changed: [r3] changed: [r2] TASK [iosxr_config: deploying bgp from /home/pipi/netlab_gh/netsim/ansible/templates/bgp/iosxr.j2] *** changed: [dut] TASK [Figure out whether to deploy the module vrf on current device] *********** ok: [r1] ok: [r2] ok: [r3] ok: [r4] ok: [dut] TASK [Find configuration template for vrf] ************************************* skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] ok: [dut] TASK [fail] ******************************************************************** skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] skipping: [dut] TASK [Find configuration deployment deploy_script for vrf] ********************* skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] ok: [dut] => msg: |- vrf configuration for dut ========================================= vrf red rd 65000:1 ! address-family ipv4 unicast import route-target 65000:1 export route-target 65000:1 ! vrf blue rd 65000:2 ! address-family ipv4 unicast import route-target 65000:2 export route-target 65000:2 ! interface FourHundredGigE0/0/0/0 vrf red ! interface FourHundredGigE0/0/0/1 vrf red ! interface FourHundredGigE0/0/0/2 vrf blue ! interface FourHundredGigE0/0/0/3 vrf blue ! ! router bgp 65000 bgp unsafe-ebgp-policy bgp scan-time 5 bgp update-delay 5 bgp router-id 10.0.0.1 address-family vpnv4 unicast bgp import-delay 0 0 bgp scan-time 5 vrf red bgp unsafe-ebgp-policy ! address-family ipv4 unicast redistribute connected neighbor 10.1.0.2 remote-as 65101 description r1 address-family ipv4 unicast send-community-ebgp ! neighbor 10.1.0.6 remote-as 65102 description r2 address-family ipv4 unicast send-community-ebgp ! vrf blue bgp unsafe-ebgp-policy ! address-family ipv4 unicast redistribute connected neighbor 10.1.0.10 remote-as 65103 description r3 address-family ipv4 unicast send-community-ebgp ! neighbor 10.1.0.14 remote-as 65104 description r4 address-family ipv4 unicast send-community-ebgp ! TASK [Deploy vrf configuration] ************************************************ skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/iosxr.yml for dut TASK [iosxr_config: deploying vrf from /home/pipi/netlab_gh/netsim/ansible/templates/vrf/iosxr.j2] *** changed: [dut] PLAY [Deploy custom deployment templates] ************************************** TASK [Run custom configuration deployment scripts] ***************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-custom-config.yml for r1, r2, r3, r4 => (item=bgp-xact) TASK [Find configuration template] ********************************************* ok: [r1] ok: [r2] ok: [r3] ok: [r4] TASK [fail] ******************************************************************** skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] TASK [Check is the configuration template is a file] *************************** ok: [r2 -> localhost] ok: [r4 -> localhost] ok: [r3 -> localhost] ok: [r1 -> localhost] TASK [fail] ******************************************************************** skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] TASK [Process template /home/pipi/netlab_gh/tests/integration/vrf/bgp-xact.j2 for r1] *** skipping: [r1] skipping: [r2] skipping: [r3] skipping: [r4] TASK [Find custom configuration deployment script] ***************************** ok: [r1] ok: [r2] ok: [r3] ok: [r4] TASK [Run the configuration deployment script] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for r1, r2, r3, r4 TASK [eos_config: deploying bgp-xact from /home/pipi/netlab_gh/tests/integration/vrf/bgp-xact.j2] *** changed: [r3] changed: [r4] changed: [r1] changed: [r2] PLAY RECAP ********************************************************************* dut : ok=32 changed=3 unreachable=0 failed=0 skipped=7 rescued=0 ignored=0 r1 : ok=37 changed=4 unreachable=0 failed=0 skipped=12 rescued=0 ignored=0 r2 : ok=36 changed=4 unreachable=0 failed=0 skipped=12 rescued=0 ignored=0 r3 : ok=36 changed=4 unreachable=0 failed=0 skipped=12 rescued=0 ignored=0 r4 : ok=36 changed=4 unreachable=0 failed=0 skipped=12 rescued=0 ignored=0 The device under test has two VRFs with two interfaces in each VRF. Routers are attached to those interfaces and run BGP with device under test. Assuming the multi-vrf test case succeeded, this one adds BGP routing with CE routers. * r1 and r2 should be able to ping each other * r3 and r4 should be able to ping each other * r1 should not be able to reach r3 The test also checks whether DUT unnecessarily enables IPv6 AF over IPv4 EBGP sessions