[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned [WARNING]: Found variable using reserved name: hosts PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [rtr] TASK [Generic readiness tests] ************************************************* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] included: /home/pipi/netlab_gh/netsim/ansible/tasks/readiness-check/ssh.yml for rtr => (item=ssh) TASK [Check if 'sshpass' is installed] ***************************************** ok: [rtr -> localhost] TASK [Check for 'timeout' command] ********************************************* ok: [rtr -> localhost] TASK [Execute local ssh command to check ssh readiness] ************************ FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (50 retries left). FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (49 retries left). FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (48 retries left). FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (47 retries left). FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (46 retries left). FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (45 retries left). FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (44 retries left). FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (43 retries left). FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (42 retries left). FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (41 retries left). FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (40 retries left). FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (39 retries left). FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (38 retries left). FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (37 retries left). FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (36 retries left). FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (35 retries left). FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (34 retries left). FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (33 retries left). FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (32 retries left). FAILED - RETRYING: [rtr -> localhost]: Execute local ssh command to check ssh readiness (31 retries left). ok: [rtr -> localhost] TASK [Confirm rtr SSH server works] ******************************************** ok: [rtr] => msg: Node rtr is ready. TASK [Find device readiness script] ******************************************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [rtr] TASK [Wait for device to become ready] ***************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [rtr] TASK [Normalize config on bridge-like devices] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, rtr TASK [Figure out whether to deploy the module normalize on current device] ***** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [rtr] TASK [Find configuration template for normalize] ******************************* ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [rtr] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [rtr] TASK [Find configuration deployment deploy_script for normalize] *************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [rtr] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [rtr] TASK [Deploy normalize configuration] ****************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [rtr] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, rtr TASK [Figure out whether to deploy the module initial on current device] ******* ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [rtr] TASK [Find configuration template for initial] ********************************* ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [rtr] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [rtr] TASK [Find configuration deployment deploy_script for initial] ***************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [rtr] TASK [Print deployed configuration when running in verbose mode] *************** ok: [h1] => msg: |- initial configuration for h1 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Send ARP requests from a sane source IP address sysctl -w net.ipv4.conf.all.arp_announce=2 # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.16.0.1/24 dev eth1 2>/dev/null set -e ip addr add 172.16.0.1/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=1 ip link set dev eth1 mtu 1500 ok: [h2] => msg: |- initial configuration for h2 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Send ARP requests from a sane source IP address sysctl -w net.ipv4.conf.all.arp_announce=2 # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.16.2.2/24 dev eth1 2>/dev/null set -e ip addr add 172.16.2.2/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=1 ip link set dev eth1 mtu 1500 ok: [h3] => msg: |- initial configuration for h3 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Send ARP requests from a sane source IP address sysctl -w net.ipv4.conf.all.arp_announce=2 # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.16.1.3/24 dev eth1 2>/dev/null set -e ip addr add 172.16.1.3/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=1 ip link set dev eth1 mtu 1500 ok: [h4] => msg: |- initial configuration for h4 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Send ARP requests from a sane source IP address sysctl -w net.ipv4.conf.all.arp_announce=2 # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.16.3.4/24 dev eth1 2>/dev/null set -e ip addr add 172.16.3.4/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=1 ip link set dev eth1 mtu 1500 ok: [rtr] => msg: |- initial configuration for rtr ========================================= hostname rtr ! domain lookup disable ! lldp no management enable ! domain ipv4 host h1 172.16.0.1 domain ipv4 host h2 172.16.2.2 domain ipv4 host h3 172.16.1.3 domain ipv4 host h4 172.16.3.4 ! interface Loopback0 no shutdown ipv4 address 10.0.0.5 255.255.255.255 ! interface FourHundredGigE0/0/0/0 no shutdown description rtr -> h1 [stub] ipv4 address 172.16.0.5 255.255.255.0 ! interface FourHundredGigE0/0/0/1 no shutdown description rtr -> h3 [stub] ipv4 address 172.16.1.5 255.255.255.0 ! interface FourHundredGigE0/0/0/2 no shutdown description rtr -> h2 [stub] ipv4 address 172.16.2.5 255.255.255.0 ! interface FourHundredGigE0/0/0/3 no shutdown description rtr -> h4 [stub] ipv4 address 172.16.3.5 255.255.255.0 ! TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/linux-clab.yml for h1, h2, h3, h4 included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/iosxr.yml for rtr TASK [Define script filename and determine whether to execute in netns] ******** ok: [h1] ok: [h2] ok: [h3] ok: [h4] TASK [Create a temporary file for the rendered script] ************************* changed: [h3 -> localhost] changed: [h4 -> localhost] changed: [h2 -> localhost] changed: [h1 -> localhost] TASK [Create container setup script from /home/pipi/netlab_gh/netsim/ansible/templates/initial/linux-clab.j2] *** changed: [h1 -> localhost] changed: [h4 -> localhost] changed: [h3 -> localhost] changed: [h2 -> localhost] TASK [Copy script into running container at /tmp/config-h1_initial.sh] ********* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Execute /tmp/config-h1_initial.sh to deploy initial config based on /home/pipi/netlab_gh/netsim/ansible/templates/initial/linux-clab.j2] *** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Container configuration for initial based on /home/pipi/netlab_gh/netsim/ansible/templates/initial/linux-clab.j2 executed in netns] *** changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] TASK [Remove temporary file /tmp/h1_initial-ayfvhuce.sh] *********************** changed: [h4 -> localhost] changed: [h3 -> localhost] changed: [h1 -> localhost] changed: [h2 -> localhost] TASK [iosxr_config: deploying initial from /home/pipi/netlab_gh/netsim/ansible/templates/initial/iosxr.j2] *** [WARNING]: To ensure idempotency and correct diff the input configuration lines should be similar to how they appear if present in the running configuration on device including the indentation changed: [rtr] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [rtr] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, rtr => (item=vrf) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, rtr => (item=routing) TASK [Figure out whether to deploy the module vrf on current device] *********** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [rtr] TASK [Find configuration template for vrf] ************************************* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [rtr] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [rtr] TASK [Find configuration deployment deploy_script for vrf] ********************* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [rtr] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [rtr] => msg: |- vrf configuration for rtr ========================================= vrf red rd 65000:1 ! address-family ipv4 unicast import route-target 65000:1 export route-target 65000:1 ! vrf blue rd 65000:2 ! address-family ipv4 unicast import route-target 65000:2 export route-target 65000:2 ! interface FourHundredGigE0/0/0/0 vrf red ! interface FourHundredGigE0/0/0/1 vrf red ! interface FourHundredGigE0/0/0/2 vrf blue ! interface FourHundredGigE0/0/0/3 vrf blue ! TASK [Deploy vrf configuration] ************************************************ skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/iosxr.yml for rtr TASK [iosxr_config: deploying vrf from /home/pipi/netlab_gh/netsim/ansible/templates/vrf/iosxr.j2] *** changed: [rtr] TASK [Figure out whether to deploy the module routing on current device] ******* ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [rtr] TASK [Find configuration template for routing] ********************************* ok: [h1] ok: [h2] skipping: [rtr] ok: [h3] ok: [h4] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [rtr] TASK [Find configuration deployment deploy_script for routing] ***************** skipping: [rtr] ok: [h1] ok: [h2] ok: [h3] ok: [h4] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [rtr] ok: [h1] => msg: |- routing configuration for h1 ========================================= #!/bin/bash # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # # echo Removing existing IPv4 routes while ip route del 172.16.0.0/16 2>/dev/null; do : ; done while ip route del 10.0.0.0/24 2>/dev/null; do : ; done while ip route del 10.1.0.0/16 2>/dev/null; do : ; done while ip route del 10.2.0.0/24 2>/dev/null; do : ; done # # # echo Adding direct static routes ip route add 172.16.0.0/16 via 172.16.0.5 dev eth1 protocol static ip route add 10.0.0.0/24 via 172.16.0.5 dev eth1 protocol static ip route add 10.1.0.0/16 via 172.16.0.5 dev eth1 protocol static ip route add 10.2.0.0/24 via 172.16.0.5 dev eth1 protocol static # # Print the final routing table ip route ok: [h2] => msg: |- routing configuration for h2 ========================================= #!/bin/bash # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # # echo Removing existing IPv4 routes while ip route del 172.16.0.0/16 2>/dev/null; do : ; done while ip route del 10.0.0.0/24 2>/dev/null; do : ; done while ip route del 10.1.0.0/16 2>/dev/null; do : ; done while ip route del 10.2.0.0/24 2>/dev/null; do : ; done # # # echo Adding direct static routes ip route add 172.16.0.0/16 via 172.16.2.5 dev eth1 protocol static ip route add 10.0.0.0/24 via 172.16.2.5 dev eth1 protocol static ip route add 10.1.0.0/16 via 172.16.2.5 dev eth1 protocol static ip route add 10.2.0.0/24 via 172.16.2.5 dev eth1 protocol static # # Print the final routing table ip route ok: [h3] => msg: |- routing configuration for h3 ========================================= #!/bin/bash # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # # echo Removing existing IPv4 routes while ip route del 172.16.0.0/16 2>/dev/null; do : ; done while ip route del 10.0.0.0/24 2>/dev/null; do : ; done while ip route del 10.1.0.0/16 2>/dev/null; do : ; done while ip route del 10.2.0.0/24 2>/dev/null; do : ; done # # # echo Adding direct static routes ip route add 172.16.0.0/16 via 172.16.1.5 dev eth1 protocol static ip route add 10.0.0.0/24 via 172.16.1.5 dev eth1 protocol static ip route add 10.1.0.0/16 via 172.16.1.5 dev eth1 protocol static ip route add 10.2.0.0/24 via 172.16.1.5 dev eth1 protocol static # # Print the final routing table ip route ok: [h4] => msg: |- routing configuration for h4 ========================================= #!/bin/bash # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # # echo Removing existing IPv4 routes while ip route del 172.16.0.0/16 2>/dev/null; do : ; done while ip route del 10.0.0.0/24 2>/dev/null; do : ; done while ip route del 10.1.0.0/16 2>/dev/null; do : ; done while ip route del 10.2.0.0/24 2>/dev/null; do : ; done # # # echo Adding direct static routes ip route add 172.16.0.0/16 via 172.16.3.5 dev eth1 protocol static ip route add 10.0.0.0/24 via 172.16.3.5 dev eth1 protocol static ip route add 10.1.0.0/16 via 172.16.3.5 dev eth1 protocol static ip route add 10.2.0.0/24 via 172.16.3.5 dev eth1 protocol static # # Print the final routing table ip route TASK [Deploy routing configuration] ******************************************** skipping: [rtr] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/linux-clab.yml for h1, h2, h3, h4 TASK [Define script filename and determine whether to execute in netns] ******** ok: [h1] ok: [h2] ok: [h3] ok: [h4] TASK [Create a temporary file for the rendered script] ************************* changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] TASK [Create container setup script from /home/pipi/netlab_gh/netsim/ansible/templates/routing/linux-clab.j2] *** changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] TASK [Copy script into running container at /tmp/config-h1_routing.sh] ********* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Execute /tmp/config-h1_routing.sh to deploy routing config based on /home/pipi/netlab_gh/netsim/ansible/templates/routing/linux-clab.j2] *** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Container configuration for routing based on /home/pipi/netlab_gh/netsim/ansible/templates/routing/linux-clab.j2 executed in netns] *** changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] TASK [Remove temporary file /tmp/h1_routing-i1i4pjhz.sh] *********************** changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* h1 : ok=31 changed=8 unreachable=0 failed=0 skipped=16 rescued=0 ignored=0 h2 : ok=31 changed=8 unreachable=0 failed=0 skipped=16 rescued=0 ignored=0 h3 : ok=31 changed=8 unreachable=0 failed=0 skipped=16 rescued=0 ignored=0 h4 : ok=31 changed=8 unreachable=0 failed=0 skipped=16 rescued=0 ignored=0 rtr : ok=28 changed=2 unreachable=0 failed=0 skipped=11 rescued=0 ignored=0 The lab tests the basic VRF lite functionality: the device under test has two VRFs with two interfaces in each VRF. * h1 and h2 should be able to ping each other * h3 and h4 should be able to ping each other * h1 should not be able to reach h3