[WARNING]: Could not match supplied host pattern, ignoring: unprovisioned [WARNING]: Found variable using reserved name: hosts PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [h2] ok: [h3] ok: [s1] TASK [Generic readiness tests] ************************************************* skipping: [h1] skipping: [h2] skipping: [h3] included: /home/pipi/netlab_gh/netsim/ansible/tasks/readiness-check/ssh.yml for s1 => (item=ssh) TASK [Check if 'sshpass' is installed] ***************************************** ok: [s1 -> localhost] TASK [Check for 'timeout' command] ********************************************* ok: [s1 -> localhost] TASK [Execute local ssh command to check ssh readiness] ************************ FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (50 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (49 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (48 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (47 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (46 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (45 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (44 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (43 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (42 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (41 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (40 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (39 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (38 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (37 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (36 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (35 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (34 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (33 retries left). FAILED - RETRYING: [s1 -> localhost]: Execute local ssh command to check ssh readiness (32 retries left). ok: [s1 -> localhost] TASK [Confirm s1 SSH server works] ********************************************* ok: [s1] => msg: Node s1 is ready. TASK [Find device readiness script] ******************************************** ok: [h1] ok: [h2] ok: [h3] ok: [s1] TASK [Wait for device to become ready] ***************************************** skipping: [s1] skipping: [h1] skipping: [h2] skipping: [h3] TASK [Normalize config on bridge-like devices] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1, h1, h2, h3 TASK [Figure out whether to deploy the module normalize on current device] ***** ok: [h1] ok: [h2] ok: [h3] ok: [s1] TASK [Find configuration template for normalize] ******************************* ok: [h1] ok: [h2] ok: [h3] ok: [s1] TASK [fail] ******************************************************************** skipping: [s1] skipping: [h1] skipping: [h2] skipping: [h3] TASK [Find configuration deployment deploy_script for normalize] *************** ok: [h1] ok: [h2] ok: [h3] ok: [s1] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [s1] skipping: [h1] skipping: [h2] skipping: [h3] TASK [Deploy normalize configuration] ****************************************** skipping: [s1] skipping: [h1] skipping: [h2] skipping: [h3] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1, h1, h2, h3 TASK [Figure out whether to deploy the module initial on current device] ******* ok: [h1] ok: [h2] ok: [h3] ok: [s1] TASK [Find configuration template for initial] ********************************* ok: [h1] ok: [h2] ok: [h3] ok: [s1] TASK [fail] ******************************************************************** skipping: [s1] skipping: [h1] skipping: [h2] skipping: [h3] TASK [Find configuration deployment deploy_script for initial] ***************** ok: [h1] ok: [h2] ok: [h3] ok: [s1] TASK [Print deployed configuration when running in verbose mode] *************** ok: [h1] => msg: |- initial configuration for h1 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Send ARP requests from a sane source IP address sysctl -w net.ipv4.conf.all.arp_announce=2 # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.16.0.1/24 dev eth1 2>/dev/null set -e ip addr add 172.16.0.1/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=0 set +e ip -6 addr del 2001:db8:cafe::1/64 dev eth1 2>/dev/null set -e ip -6 addr add 2001:db8:cafe::1/64 dev eth1 ip link set dev eth1 mtu 1500 ok: [h2] => msg: |- initial configuration for h2 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Send ARP requests from a sane source IP address sysctl -w net.ipv4.conf.all.arp_announce=2 # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.16.0.2/24 dev eth1 2>/dev/null set -e ip addr add 172.16.0.2/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=0 set +e ip -6 addr del 2001:db8:cafe::2/64 dev eth1 2>/dev/null set -e ip -6 addr add 2001:db8:cafe::2/64 dev eth1 ip link set dev eth1 mtu 1500 ok: [h3] => msg: |- initial configuration for h3 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Send ARP requests from a sane source IP address sysctl -w net.ipv4.conf.all.arp_announce=2 # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.16.1.3/24 dev eth1 2>/dev/null set -e ip addr add 172.16.1.3/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=0 set +e ip -6 addr del 2001:db8:cafe:1::3/64 dev eth1 2>/dev/null set -e ip -6 addr add 2001:db8:cafe:1::3/64 dev eth1 ip link set dev eth1 mtu 1500 ok: [s1] => msg: |- initial configuration for s1 ========================================= hostname s1 ! domain lookup disable ! lldp no management enable ! domain ipv4 host h1 172.16.0.1 domain ipv4 host h2 172.16.0.2 domain ipv4 host h3 172.16.1.3 domain ipv6 host h1 2001:db8:cafe::1 domain ipv6 host h2 2001:db8:cafe::2 domain ipv6 host h3 2001:db8:cafe:1::3 ! interface Loopback0 no shutdown ipv4 address 10.0.0.132 255.255.255.255 ipv6 address 2001:db8:e001:84::1/64 ! interface FourHundredGigE0/0/0/0 no shutdown description s1 -> h3 [stub] ipv4 address 172.16.1.132 255.255.255.0 ipv6 address 2001:db8:cafe:1::84/64 ipv6 nd ra-interval 5 ! interface FourHundredGigE0/0/0/1 no shutdown description [Access VLAN red] s1 -> h1 ! interface FourHundredGigE0/0/0/2 no shutdown description [Access VLAN red] s1 -> h2 ! interface BVI700 no shutdown description VLAN red (700) -> [h1,h2] [stub] ipv4 address 172.16.0.132 255.255.255.0 ipv6 address 2001:db8:cafe::84/64 ipv6 nd ra-interval 5 ! TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/iosxr.yml for s1 included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/linux-clab.yml for h1, h2, h3 TASK [iosxr_config: deploying initial from /home/pipi/netlab_gh/netsim/ansible/templates/initial/iosxr.j2] *** [WARNING]: To ensure idempotency and correct diff the input configuration lines should be similar to how they appear if present in the running configuration on device including the indentation changed: [s1] TASK [Define script filename and determine whether to execute in netns] ******** ok: [h1] ok: [h2] ok: [h3] TASK [Create a temporary file for the rendered script] ************************* changed: [h2 -> localhost] changed: [h1 -> localhost] changed: [h3 -> localhost] TASK [Create container setup script from /home/pipi/netlab_gh/netsim/ansible/templates/initial/linux-clab.j2] *** changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] TASK [Copy script into running container at /tmp/config-h1_initial.sh] ********* skipping: [h1] skipping: [h2] skipping: [h3] TASK [Execute /tmp/config-h1_initial.sh to deploy initial config based on /home/pipi/netlab_gh/netsim/ansible/templates/initial/linux-clab.j2] *** skipping: [h1] skipping: [h2] skipping: [h3] TASK [Container configuration for initial based on /home/pipi/netlab_gh/netsim/ansible/templates/initial/linux-clab.j2 executed in netns] *** changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] TASK [Remove temporary file /tmp/h1_initial-5j_5cakj.sh] *********************** changed: [h3 -> localhost] changed: [h1 -> localhost] changed: [h2 -> localhost] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [h2] ok: [h3] ok: [s1] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1, h1, h2, h3 => (item=vlan) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for s1, h1, h2, h3 => (item=routing) TASK [Figure out whether to deploy the module vlan on current device] ********** ok: [h1] ok: [h2] ok: [h3] ok: [s1] TASK [Find configuration template for vlan] ************************************ skipping: [h1] skipping: [h2] skipping: [h3] ok: [s1] TASK [fail] ******************************************************************** skipping: [s1] skipping: [h1] skipping: [h2] skipping: [h3] TASK [Find configuration deployment deploy_script for vlan] ******************** skipping: [h1] skipping: [h2] skipping: [h3] ok: [s1] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] skipping: [h3] ok: [s1] => msg: |- vlan configuration for s1 ========================================= interface FourHundredGigE0/0/0/1 l2transport ! interface FourHundredGigE0/0/0/2 l2transport ! l2vpn bridge group netlab bridge-domain BD700 routed interface BVI700 interface FourHundredGigE0/0/0/1 interface FourHundredGigE0/0/0/2 ! TASK [Deploy vlan configuration] *********************************************** skipping: [h1] skipping: [h2] skipping: [h3] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/iosxr.yml for s1 TASK [iosxr_config: deploying vlan from /home/pipi/netlab_gh/netsim/ansible/templates/vlan/cisco8000v.j2] *** changed: [s1] TASK [Figure out whether to deploy the module routing on current device] ******* ok: [h1] ok: [h2] ok: [h3] ok: [s1] TASK [Find configuration template for routing] ********************************* skipping: [s1] ok: [h1] ok: [h2] ok: [h3] TASK [fail] ******************************************************************** skipping: [s1] skipping: [h1] skipping: [h2] skipping: [h3] TASK [Find configuration deployment deploy_script for routing] ***************** skipping: [s1] ok: [h1] ok: [h2] ok: [h3] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [s1] ok: [h1] => msg: |- routing configuration for h1 ========================================= #!/bin/bash # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # # echo Removing existing IPv4 routes while ip route del 172.16.0.0/16 2>/dev/null; do : ; done while ip route del 10.0.0.0/24 2>/dev/null; do : ; done while ip route del 10.1.0.0/16 2>/dev/null; do : ; done while ip route del 10.2.0.0/24 2>/dev/null; do : ; done # # # echo Adding direct static routes ip route add 172.16.0.0/16 via 172.16.0.132 dev eth1 protocol static ip route add 10.0.0.0/24 via 172.16.0.132 dev eth1 protocol static ip route add 10.1.0.0/16 via 172.16.0.132 dev eth1 protocol static ip route add 10.2.0.0/24 via 172.16.0.132 dev eth1 protocol static # # Print the final routing table ip route ok: [h2] => msg: |- routing configuration for h2 ========================================= #!/bin/bash # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # # echo Removing existing IPv4 routes while ip route del 172.16.0.0/16 2>/dev/null; do : ; done while ip route del 10.0.0.0/24 2>/dev/null; do : ; done while ip route del 10.1.0.0/16 2>/dev/null; do : ; done while ip route del 10.2.0.0/24 2>/dev/null; do : ; done # # # echo Adding direct static routes ip route add 172.16.0.0/16 via 172.16.0.132 dev eth1 protocol static ip route add 10.0.0.0/24 via 172.16.0.132 dev eth1 protocol static ip route add 10.1.0.0/16 via 172.16.0.132 dev eth1 protocol static ip route add 10.2.0.0/24 via 172.16.0.132 dev eth1 protocol static # # Print the final routing table ip route ok: [h3] => msg: |- routing configuration for h3 ========================================= #!/bin/bash # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # # echo Removing existing IPv4 routes while ip route del 172.16.0.0/16 2>/dev/null; do : ; done while ip route del 10.0.0.0/24 2>/dev/null; do : ; done while ip route del 10.1.0.0/16 2>/dev/null; do : ; done while ip route del 10.2.0.0/24 2>/dev/null; do : ; done # # # echo Adding direct static routes ip route add 172.16.0.0/16 via 172.16.1.132 dev eth1 protocol static ip route add 10.0.0.0/24 via 172.16.1.132 dev eth1 protocol static ip route add 10.1.0.0/16 via 172.16.1.132 dev eth1 protocol static ip route add 10.2.0.0/24 via 172.16.1.132 dev eth1 protocol static # # Print the final routing table ip route TASK [Deploy routing configuration] ******************************************** skipping: [s1] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/linux-clab.yml for h1, h2, h3 TASK [Define script filename and determine whether to execute in netns] ******** ok: [h1] ok: [h2] ok: [h3] TASK [Create a temporary file for the rendered script] ************************* changed: [h2 -> localhost] changed: [h1 -> localhost] changed: [h3 -> localhost] TASK [Create container setup script from /home/pipi/netlab_gh/netsim/ansible/templates/routing/linux-clab.j2] *** changed: [h2 -> localhost] changed: [h1 -> localhost] changed: [h3 -> localhost] TASK [Copy script into running container at /tmp/config-h1_routing.sh] ********* skipping: [h1] skipping: [h2] skipping: [h3] TASK [Execute /tmp/config-h1_routing.sh to deploy routing config based on /home/pipi/netlab_gh/netsim/ansible/templates/routing/linux-clab.j2] *** skipping: [h1] skipping: [h2] skipping: [h3] TASK [Container configuration for routing based on /home/pipi/netlab_gh/netsim/ansible/templates/routing/linux-clab.j2 executed in netns] *** changed: [h2 -> localhost] changed: [h1 -> localhost] changed: [h3 -> localhost] TASK [Remove temporary file /tmp/h1_routing-iidlwx09.sh] *********************** changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h1 -> localhost] PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* h1 : ok=31 changed=8 unreachable=0 failed=0 skipped=16 rescued=0 ignored=0 h2 : ok=31 changed=8 unreachable=0 failed=0 skipped=16 rescued=0 ignored=0 h3 : ok=31 changed=8 unreachable=0 failed=0 skipped=16 rescued=0 ignored=0 s1 : ok=28 changed=2 unreachable=0 failed=0 skipped=11 rescued=0 ignored=0 The device under test is a layer-3 switch bridging VLAN between ports and having an IP address in the red VLAN h1 and h2 should be able to ping s1 and each other