Creating Device configuration snippets [CREATED] ce1: initial,ospf [CREATED] ce2: initial,ospf [CREATED] dut: initial,ospf,bgp,mpls,vrf [CREATED] pe2: initial,ospf,bgp,mpls,vrf [CREATED] p1: initial,ospf,mpls [CREATED] p2: initial,ospf,mpls Checking Are lab devices ready to be configured? [INFO] Checking SSH server(s) on dut [SSH] SSH server on node dut (device cisco8000v) is ready after 167.4 seconds Config Deploying device configurations [INFO] Executing initial configuration for node ce1 [INFO] Executing initial configuration for node ce2 [INFO] Executing initial configuration for node pe2 [INFO] Executing initial configuration for node p1 [INFO] Executing initial configuration for node p2 [INFO] Executing ospf configuration for node p2 [INFO] Executing ospf configuration for node ce1 [INFO] Executing ospf configuration for node ce2 [INFO] Executing ospf configuration for node p1 [INFO] Executing ospf configuration for node pe2 [INFO] Executing mpls configuration for node p2 [INFO] Executing mpls configuration for node p1 [INFO] Executing bgp configuration for node pe2 [INFO] Executing mpls configuration for node pe2 [INFO] Executing vrf configuration for node pe2 [INFO] Starting Ansible playbook to deploy the rest of the configurations [WARNING]: Found variable using reserved name: hosts PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [dut] TASK [Normalize config on bridge-like devices] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut TASK [Figure out whether to deploy the module normalize on current device] ***** ok: [dut] TASK [Find configuration template for normalize] ******************************* ok: [dut] TASK [fail] ******************************************************************** skipping: [dut] TASK [Find configuration deployment deploy_script for normalize] *************** ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [dut] TASK [Deploy normalize configuration] ****************************************** skipping: [dut] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut TASK [Figure out whether to deploy the module initial on current device] ******* ok: [dut] TASK [Find configuration template for initial] ********************************* ok: [dut] TASK [fail] ******************************************************************** skipping: [dut] TASK [Find configuration deployment deploy_script for initial] ***************** ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => { "msg": "initial configuration for dut\n=========================================\nhostname dut\n!\ndomain lookup disable\n!\nlldp\n no management enable\n!\ndomain ipv4 host ce1 10.0.0.1\ndomain ipv4 host ce2 10.0.0.2\ndomain ipv4 host pe2 10.0.0.4\ndomain ipv4 host p1 10.0.0.5\ndomain ipv4 host p2 10.0.0.6\n!\ninterface Loopback0\n no shutdown\n ipv4 address 10.0.0.3 255.255.255.255\n!\ninterface FourHundredGigE0/0/0/0\n no shutdown\n description dut -> p1\n ipv4 address 10.1.0.1 255.255.255.252\n!\ninterface FourHundredGigE0/0/0/1\n no shutdown\n description dut -> ce1\n ipv4 address 10.1.0.14 255.255.255.252\n!\n" } TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/iosxr.yml for dut TASK [iosxr_config: deploying initial from /work/netlab_cicd/xr/node_files/dut/initial] *** [WARNING]: To ensure idempotency and correct diff the input configuration lines should be similar to how they appear if present in the running configuration on device including the indentation changed: [dut] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [dut] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut => (item=ospf) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut => (item=bgp) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut => (item=mpls) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for dut => (item=vrf) TASK [Figure out whether to deploy the module ospf on current device] ********** ok: [dut] TASK [Find configuration template for ospf] ************************************ ok: [dut] TASK [fail] ******************************************************************** skipping: [dut] TASK [Find configuration deployment deploy_script for ospf] ******************** ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => { "msg": "ospf configuration for dut\n=========================================\n!\nrouter ospf 1\n!\n! These throttle timers are probably too aggressive for a production network but\n! make labs run better ;)\n!\n timers throttle spf 10 20 100\n timers throttle lsa all 10 20 100\n router-id 10.0.0.3\n\n loopback stub-network enable\n area 0.0.0.0\n interface Loopback0\n interface FourHundredGigE0/0/0/0\n network point-to-point\n\n" } TASK [Deploy ospf configuration] *********************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/iosxr.yml for dut TASK [iosxr_config: deploying ospf from /work/netlab_cicd/xr/node_files/dut/ospf] *** changed: [dut] TASK [Figure out whether to deploy the module bgp on current device] *********** ok: [dut] TASK [Find configuration template for bgp] ************************************* ok: [dut] TASK [fail] ******************************************************************** skipping: [dut] TASK [Find configuration deployment deploy_script for bgp] ********************* ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => { "msg": "bgp configuration for dut\n=========================================\n!\n!\nrouter bgp 65001\n bgp unsafe-ebgp-policy\n bgp scan-time 5\n bgp update-delay 5\n bgp router-id 10.0.0.3\n\n!\n address-family ipv4 unicast\n bgp scan-time 5\n!\n network 10.0.0.3/32\n!\n!\n neighbor 10.0.0.4\n remote-as 65001\n description pe2\n update-source Loopback0\n address-family ipv4 unicast\n next-hop-self\n\n" } TASK [Deploy bgp configuration] ************************************************ included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/iosxr.yml for dut TASK [iosxr_config: deploying bgp from /work/netlab_cicd/xr/node_files/dut/bgp] *** changed: [dut] TASK [Figure out whether to deploy the module mpls on current device] ********** ok: [dut] TASK [Find configuration template for mpls] ************************************ ok: [dut] TASK [fail] ******************************************************************** skipping: [dut] TASK [Find configuration deployment deploy_script for mpls] ******************** ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => { "msg": "mpls configuration for dut\n=========================================\n!\nmpls ldp\n router-id 10.0.0.3\n log neighbor\n log hello-adjacency\n !\n interface FourHundredGigE0/0/0/0\n !\n address-family ipv4\n\n!\nrouter bgp 65001\n!\n! Initialize VPN AFs\n!\n address-family vpnv4 unicast\n bgp scan-time 5\n bgp import-delay 0 0\n!\n! Enable VPN AFs on BGP neighbors\n!\n neighbor 10.0.0.4\n address-family vpnv4 unicast\n\n" } TASK [Deploy mpls configuration] *********************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/iosxr.yml for dut TASK [iosxr_config: deploying mpls from /work/netlab_cicd/xr/node_files/dut/mpls] *** changed: [dut] TASK [Figure out whether to deploy the module vrf on current device] *********** ok: [dut] TASK [Find configuration template for vrf] ************************************* ok: [dut] TASK [fail] ******************************************************************** skipping: [dut] TASK [Find configuration deployment deploy_script for vrf] ********************* ok: [dut] TASK [Print deployed configuration when running in verbose mode] *************** ok: [dut] => { "msg": "vrf configuration for dut\n=========================================\nvrf tenant\n rd 65000:1\n!\n address-family ipv4 unicast\n import route-target 65000:1\n export route-target 65000:1\n!\ninterface FourHundredGigE0/0/0/1\n vrf tenant\n!\n!\nrouter bgp 65001\n bgp unsafe-ebgp-policy\n bgp scan-time 5\n bgp update-delay 5\n bgp router-id 10.0.0.3\n\n address-family vpnv4 unicast\n bgp import-delay 0 0\n bgp scan-time 5\n vrf tenant\n bgp unsafe-ebgp-policy\n!\n address-family ipv4 unicast\n redistribute connected\n redistribute ospf 100 match internal external nssa-external\n\nrouter ospf 100 vrf tenant\n!\n! These throttle timers are probably too aggressive for a production network but\n! make labs run better ;)\n!\n timers throttle spf 10 20 100\n timers throttle lsa all 10 20 100\n router-id 10.0.0.3\n\n loopback stub-network enable\n redistribute bgp 65001\n redistribute connected\n\n area 0.0.0.0\n interface FourHundredGigE0/0/0/1\n network point-to-point\n\n" } TASK [Deploy vrf configuration] ************************************************ included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/iosxr.yml for dut TASK [iosxr_config: deploying vrf from /work/netlab_cicd/xr/node_files/dut/vrf] *** changed: [dut] PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* dut : ok=41 changed=5 unreachable=0 failed=0 skipped=8 rescued=0 ignored=0 Results of configuration script deployments ================================================================================ ce1 Script: initial,ospf ce2 Script: initial,ospf pe2 Script: initial,ospf,bgp,mpls,vrf p1 Script: initial,ospf,mpls p2 Script: initial,ospf,mpls The tested device (DUT) is a PE-router running MPLS/VPN with a simple VRF. Two OSPF-speaking CE-routers are attached to the VRF (one per PE-router) The PE-router has to run OSPF and LDP with a P-router, exchange IPv4 routes via OSPF with the CE-router, do two-way redistribution of OSPF and VPNv4 routes, and pass VPNv4 routes to another PE-router. The validation tests check OSPF prefixes on the CE-routers and perform end-to-end connectivity tests between CE-router loopbacks.