/home/pipi/.local/lib/python3.10/site-packages/paramiko/pkey.py:100: CryptographyDeprecationWarning: TripleDES has been moved to cryptography.hazmat.decrepit.ciphers.algorithms.TripleDES and will be removed from cryptography.hazmat.primitives.ciphers.algorithms in 48.0.0. "cipher": algorithms.TripleDES, /home/pipi/.local/lib/python3.10/site-packages/paramiko/transport.py:259: CryptographyDeprecationWarning: TripleDES has been moved to cryptography.hazmat.decrepit.ciphers.algorithms.TripleDES and will be removed from cryptography.hazmat.primitives.ciphers.algorithms in 48.0.0. "class": algorithms.TripleDES, [WARNING]: Could not match supplied host pattern, ignoring: unprovisioned [WARNING]: Found variable using reserved name: hosts PLAY [Deploy initial device configuration] ************************************* TASK [Set variables that cannot be set with VARS] ****************************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Find device readiness script] ******************************************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Wait for device to become ready] ***************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [s1] skipping: [s2] TASK [Normalize config on bridge-like devices] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, s1, s2 TASK [Figure out whether to deploy the module normalize on current device] ***** ok: [h1] ok: [h3] ok: [h2] ok: [h4] ok: [s1] ok: [s2] TASK [Find configuration template for normalize] ******************************* ok: [h1] ok: [h2] ok: [h4] ok: [h3] ok: [s1] ok: [s2] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [s1] skipping: [s2] TASK [Find configuration deployment deploy_script for normalize] *************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [s1] ok: [s2] => msg: |- normalize configuration for s2 ========================================= ! interface Ethernet1 shutdown mac-address 52dc.cafe.0601 ! interface Ethernet2 shutdown mac-address 52dc.cafe.0602 ! interface Ethernet3 shutdown mac-address 52dc.cafe.0603 TASK [Deploy normalize configuration] ****************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [s1] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for s2 TASK [eos_config: deploying normalize from /home/pipi/netlab_gh/netsim/ansible/templates/normalize/eos.j2] *** [WARNING]: To ensure idempotency and correct diff the input configuration lines should be similar to how they appear if present in the running configuration on device including the indentation changed: [s2] TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, s1, s2 TASK [Figure out whether to deploy the module initial on current device] ******* ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Find configuration template for initial] ********************************* ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [s1] skipping: [s2] TASK [Find configuration deployment deploy_script for initial] ***************** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** ok: [h1] => msg: |- initial configuration for h1 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Send ARP requests from a sane source IP address sysctl -w net.ipv4.conf.all.arp_announce=2 # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.31.1.1/24 dev eth1 2>/dev/null set -e ip addr add 172.31.1.1/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=1 ip link set dev eth1 mtu 1500 ok: [h2] => msg: |- initial configuration for h2 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Send ARP requests from a sane source IP address sysctl -w net.ipv4.conf.all.arp_announce=2 # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.31.1.2/24 dev eth1 2>/dev/null set -e ip addr add 172.31.1.2/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=1 ip link set dev eth1 mtu 1500 ok: [h3] => msg: |- initial configuration for h3 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Send ARP requests from a sane source IP address sysctl -w net.ipv4.conf.all.arp_announce=2 # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.31.1.3/24 dev eth1 2>/dev/null set -e ip addr add 172.31.1.3/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=1 ip link set dev eth1 mtu 1500 ok: [h4] => msg: |- initial configuration for h4 ========================================= #!/bin/bash # # This script contains the 'ip' commands needed to set up container # interfaces and route table. It's executed within the container # network namespace on the container host. # # /etc/hosts file is generated as a clab bind. # set -e ### One-Shot configuration (non-Ubuntu VM or container) # # Send ARP requests from a sane source IP address sysctl -w net.ipv4.conf.all.arp_announce=2 # # Disable IPv4 and IPv6 forwarding # sysctl -w net.ipv4.ip_forward=0 sysctl -w net.ipv6.conf.all.forwarding=0 # # Interface addressing, create any bond devices # ip link set dev eth1 up set +e ip addr del 172.31.1.4/24 dev eth1 2>/dev/null set -e ip addr add 172.31.1.4/24 dev eth1 sysctl -w net.ipv6.conf.eth1.disable_ipv6=1 ip link set dev eth1 mtu 1500 ok: [s1] => msg: |- initial configuration for s1 ========================================= hostname s1 ! lldp ! vrf tenant rd 65000:1 ! ! vlan 1000 name red ! vlan 1001 name blue ! ! ! interface mgmt no lldp transmit no lldp receive ! interface loopback 0 ip address 10.0.0.5/32 ! interface 1/1/1 shutdown mtu 9198 ip mtu 1600 description s1 -> s2 ip address 10.1.0.1/30 no shutdown ! interface 1/1/2 shutdown mtu 9198 description [Access VLAN red] s1 -> h1 no shutdown ! interface 1/1/3 shutdown mtu 9198 description [Access VLAN blue] s1 -> h3 no shutdown ! interface vlan1000 vrf attach tenant description VLAN red (1000) -> [h1,h2,s2] ! interface vlan1001 vrf attach tenant description VLAN blue (1001) -> [h3,h4,s2] ! ! ok: [s2] => msg: |- initial configuration for s2 ========================================= hostname s2 ! logging monitor debugging aaa authorization exec default local ! lldp run ip routing no ipv6 unicast-routing ! vrf instance tenant rd 65000:1 ! ! ip host h1 172.31.1.1 ip host h2 172.31.1.2 ip host h3 172.31.1.3 ip host h4 172.31.1.4 ip host s1 10.0.0.5 10.1.0.1 ! interface Management1 no lldp transmit no lldp receive ! interface Loopback0 ip address 10.0.0.6/32 ! interface Ethernet1 no switchport mtu 1600 description s2 -> s1 ip address 10.1.0.2/30 ! mac-address 52dc.cafe.0601 no shutdown ! interface Ethernet2 no switchport description [Access VLAN red] s2 -> h2 ! mac-address 52dc.cafe.0602 no shutdown ! interface Ethernet3 no switchport description [Access VLAN blue] s2 -> h4 ! mac-address 52dc.cafe.0603 no shutdown ! interface Vlan1000 vrf tenant description VLAN red (1000) -> [h1,s1,h2] ! interface Vlan1001 vrf tenant description VLAN blue (1001) -> [h3,s1,h4] ! TASK [Deploy initial configuration] ******************************************** included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/linux-clab.yml for h1, h2, h3, h4 included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/arubacx.yml for s1 included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for s2 TASK [Define script filename and determine whether to execute in netns] ******** ok: [h1] ok: [h2] ok: [h3] ok: [h4] TASK [Create a temporary file for the rendered script] ************************* changed: [h2 -> localhost] changed: [h1 -> localhost] changed: [h4 -> localhost] changed: [h3 -> localhost] TASK [Create container setup script from /home/pipi/netlab_gh/netsim/ansible/templates/initial/linux-clab.j2] *** changed: [h2 -> localhost] changed: [h1 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] TASK [Copy script into running container at /tmp/config-h1_initial.sh] ********* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Execute /tmp/config-h1_initial.sh to deploy initial config based on /home/pipi/netlab_gh/netsim/ansible/templates/initial/linux-clab.j2] *** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Container configuration for initial based on /home/pipi/netlab_gh/netsim/ansible/templates/initial/linux-clab.j2 executed in netns] *** changed: [h2 -> localhost] changed: [h4 -> localhost] changed: [h3 -> localhost] changed: [h1 -> localhost] TASK [Remove temporary file /tmp/h1_initial-6dti1vfp.sh] *********************** changed: [h1 -> localhost] changed: [h4 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] TASK [tempfile] **************************************************************** changed: [s1 -> localhost] TASK [template] **************************************************************** changed: [s1 -> localhost] TASK [aoscx_config: deploying initial from /home/pipi/netlab_gh/netsim/ansible/templates/initial/arubacx.j2] *** changed: [s1] TASK [file] ******************************************************************** changed: [s1 -> localhost] TASK [eos_config: deploying initial from /home/pipi/netlab_gh/netsim/ansible/templates/initial/eos.j2] *** changed: [s2] PLAY [Deploy module-specific configurations] *********************************** TASK [Set variables that cannot be set with VARS] ****************************** ok: [h2] ok: [h1] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Deploy individual configuration modules] ********************************* included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, s1, s2 => (item=vlan) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, s1, s2 => (item=routing) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, s1, s2 => (item=ospf) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, s1, s2 => (item=bgp) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, s1, s2 => (item=vrf) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, s1, s2 => (item=vxlan) included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-module.yml for h1, h2, h3, h4, s1, s2 => (item=evpn) TASK [Figure out whether to deploy the module vlan on current device] ********** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Find configuration template for vlan] ************************************ skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [s1] skipping: [s2] TASK [Find configuration deployment deploy_script for vlan] ******************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] => msg: |- vlan configuration for s1 ========================================= ! ! interface 1/1/2 no routing vlan access 1000 ! interface 1/1/3 no routing vlan access 1001 ! interface vlan1000 ! interface vlan1001 ok: [s2] => msg: |- vlan configuration for s2 ========================================= vlan 1000 name red ! vlan 1001 name blue ! ! interface Ethernet2 switchport switchport access vlan 1000 ! interface Ethernet3 switchport switchport access vlan 1001 ! interface Vlan1000 ! interface Vlan1001 TASK [Deploy vlan configuration] *********************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/arubacx.yml for s1 included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for s2 TASK [tempfile] **************************************************************** changed: [s1 -> localhost] TASK [template] **************************************************************** changed: [s1 -> localhost] TASK [aoscx_config: deploying vlan from /home/pipi/netlab_gh/netsim/ansible/templates/vlan/arubacx.j2] *** changed: [s1] TASK [file] ******************************************************************** changed: [s1 -> localhost] TASK [eos_config: deploying vlan from /home/pipi/netlab_gh/netsim/ansible/templates/vlan/eos.j2] *** changed: [s2] TASK [Figure out whether to deploy the module routing on current device] ******* ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Find configuration template for routing] ********************************* ok: [h1] ok: [h2] skipping: [s1] ok: [h3] skipping: [s2] ok: [h4] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [s1] skipping: [s2] TASK [Find configuration deployment deploy_script for routing] ***************** ok: [h1] skipping: [s1] ok: [h2] skipping: [s2] ok: [h4] ok: [h3] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [s1] skipping: [s2] ok: [h1] => msg: |- routing configuration for h1 ========================================= #!/bin/bash # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # # # # # # # Print the final routing table ip route ok: [h2] => msg: |- routing configuration for h2 ========================================= #!/bin/bash # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # # # # # # # Print the final routing table ip route ok: [h4] => msg: |- routing configuration for h4 ========================================= #!/bin/bash # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # # # # # # # Print the final routing table ip route ok: [h3] => msg: |- routing configuration for h3 ========================================= #!/bin/bash # # Add static routes (usually IPv4 routes pointing to the first usable gateway) # # # # # # # Print the final routing table ip route TASK [Deploy routing configuration] ******************************************** skipping: [s1] skipping: [s2] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/linux-clab.yml for h1, h2, h3, h4 TASK [Define script filename and determine whether to execute in netns] ******** ok: [h1] ok: [h2] ok: [h3] ok: [h4] TASK [Create a temporary file for the rendered script] ************************* changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] TASK [Create container setup script from /home/pipi/netlab_gh/netsim/ansible/templates/routing/linux-clab.j2] *** changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] TASK [Copy script into running container at /tmp/config-h1_routing.sh] ********* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Execute /tmp/config-h1_routing.sh to deploy routing config based on /home/pipi/netlab_gh/netsim/ansible/templates/routing/linux-clab.j2] *** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] TASK [Container configuration for routing based on /home/pipi/netlab_gh/netsim/ansible/templates/routing/linux-clab.j2 executed in netns] *** changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] TASK [Remove temporary file /tmp/h1_routing-x9mlq4nz.sh] *********************** changed: [h1 -> localhost] changed: [h2 -> localhost] changed: [h3 -> localhost] changed: [h4 -> localhost] TASK [Figure out whether to deploy the module ospf on current device] ********** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Find configuration template for ospf] ************************************ skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [s1] skipping: [s2] TASK [Find configuration deployment deploy_script for ospf] ******************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] => msg: |- ospf configuration for s1 ========================================= ! router ospf 1 router-id 10.0.0.5 area 0.0.0.0 area 0.0.0.0 ! interface loopback 0 ip ospf 1 area 0.0.0.0 ! interface 1/1/1 ! s1 -> s2 ip ospf 1 area 0.0.0.0 ip ospf network point-to-point ! ok: [s2] => msg: |- ospf configuration for s2 ========================================= ! ! OSPFv2 configuration ! router ospf 1 router-id 10.0.0.6 interface unnumbered hello mask tx 0.0.0.0 timers spf delay initial 100 200 500 timers lsa rx min interval 100 timers lsa tx delay initial 100 200 500 ! interface Loopback0 ! ip ospf area 0.0.0.0 ! interface Ethernet1 ! s2 -> s1 ip ospf area 0.0.0.0 ip ospf network point-to-point ! TASK [Deploy ospf configuration] *********************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/arubacx.yml for s1 included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for s2 TASK [tempfile] **************************************************************** changed: [s1 -> localhost] TASK [template] **************************************************************** changed: [s1 -> localhost] TASK [aoscx_config: deploying ospf from /home/pipi/netlab_gh/netsim/ansible/templates/ospf/arubacx.j2] *** changed: [s1] TASK [file] ******************************************************************** changed: [s1 -> localhost] TASK [eos_config: deploying ospf from /home/pipi/netlab_gh/netsim/ansible/templates/ospf/eos.j2] *** changed: [s2] TASK [Figure out whether to deploy the module bgp on current device] *********** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Find configuration template for bgp] ************************************* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [s1] skipping: [s2] TASK [Find configuration deployment deploy_script for bgp] ********************* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] => msg: |- bgp configuration for s1 ========================================= ! ! router bgp 65000 bgp log-neighbor-changes timers bgp connect-retry 10 bgp router-id 10.0.0.5 neighbor 10.0.0.6 remote-as 65000 neighbor 10.0.0.6 description s2 neighbor 10.0.0.6 update-source loopback 0 ! address-family ipv4 unicast ! network 10.0.0.5/32 ! ! neighbor 10.0.0.6 activate neighbor 10.0.0.6 advertisement-interval 1 neighbor 10.0.0.6 send-community both neighbor 10.0.0.6 next-hop-self ! ok: [s2] => msg: |- bgp configuration for s2 ========================================= ! route-map next-hop-self-ipv4 permit 10 match route-type external set ip next-hop peer-address ! route-map next-hop-self-ipv4 permit 20 ! ! router bgp 65000 bgp advertise-inactive bgp log-neighbor-changes no bgp default ipv4-unicast no bgp default ipv6-unicast router-id 10.0.0.6 ! neighbor 10.0.0.5 remote-as 65000 neighbor 10.0.0.5 description s1 neighbor 10.0.0.5 update-source Loopback0 neighbor 10.0.0.5 send-community standard extended large ! ! address-family ipv4 network 10.0.0.6/32 ! ! ! neighbor 10.0.0.5 activate neighbor 10.0.0.5 route-map next-hop-self-ipv4 out ! TASK [Deploy bgp configuration] ************************************************ skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/arubacx.yml for s1 included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for s2 TASK [tempfile] **************************************************************** changed: [s1 -> localhost] TASK [template] **************************************************************** changed: [s1 -> localhost] TASK [aoscx_config: deploying bgp from /home/pipi/netlab_gh/netsim/ansible/templates/bgp/arubacx.j2] *** changed: [s1] TASK [file] ******************************************************************** changed: [s1 -> localhost] TASK [eos_config: deploying bgp from /home/pipi/netlab_gh/netsim/ansible/templates/bgp/eos.j2] *** changed: [s2] TASK [Figure out whether to deploy the module vrf on current device] *********** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Find configuration template for vrf] ************************************* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [s1] skipping: [s2] TASK [Find configuration deployment deploy_script for vrf] ********************* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] => msg: |- vrf configuration for s1 ========================================= ! router bgp 65000 vrf tenant bgp router-id 10.0.0.5 ok: [s2] => msg: |- vrf configuration for s2 ========================================= ! mpls ip ! router bgp 65000 ! vrf tenant router-id 10.0.0.6 rd 65000:1 TASK [Deploy vrf configuration] ************************************************ skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/arubacx.yml for s1 included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for s2 TASK [tempfile] **************************************************************** changed: [s1 -> localhost] TASK [template] **************************************************************** changed: [s1 -> localhost] TASK [aoscx_config: deploying vrf from /home/pipi/netlab_gh/netsim/ansible/templates/vrf/arubacx.j2] *** changed: [s1] TASK [file] ******************************************************************** changed: [s1 -> localhost] TASK [eos_config: deploying vrf from /home/pipi/netlab_gh/netsim/ansible/templates/vrf/eos.j2] *** changed: [s2] TASK [Figure out whether to deploy the module vxlan on current device] ********* ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Find configuration template for vxlan] *********************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [s1] skipping: [s2] TASK [Find configuration deployment deploy_script for vxlan] ******************* skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s2] ok: [s1] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] => msg: |- vxlan configuration for s1 ========================================= ! interface vxlan 1 source ip 10.0.0.5 no shutdown vni 1000 vlan 1000 vni 1001 vlan 1001 ok: [s2] => msg: |- vxlan configuration for s2 ========================================= interface vxlan 1 vxlan source-interface Loopback0 vxlan vlan 1000 vni 1000 vxlan vlan 1001 vni 1001 TASK [Deploy vxlan configuration] ********************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/arubacx.yml for s1 included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for s2 TASK [tempfile] **************************************************************** changed: [s1 -> localhost] TASK [template] **************************************************************** changed: [s1 -> localhost] TASK [aoscx_config: deploying vxlan from /home/pipi/netlab_gh/netsim/ansible/templates/vxlan/arubacx.j2] *** changed: [s1] TASK [file] ******************************************************************** changed: [s1 -> localhost] TASK [eos_config: deploying vxlan from /home/pipi/netlab_gh/netsim/ansible/templates/vxlan/eos.j2] *** changed: [s2] TASK [Figure out whether to deploy the module evpn on current device] ********** ok: [h1] ok: [h2] ok: [h3] ok: [h4] ok: [s1] ok: [s2] TASK [Find configuration template for evpn] ************************************ skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [fail] ******************************************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] skipping: [s1] skipping: [s2] TASK [Find configuration deployment deploy_script for evpn] ******************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s1] ok: [s2] TASK [Print deployed configuration when running in verbose mode] *************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] ok: [s2] => msg: |- evpn configuration for s2 ========================================= ! router bgp 65000 address-family evpn ! neighbor 10.0.0.5 activate ! vlan-aware-bundle tenant rd 65000:1 route-target import 65000:1 route-target export 65000:1 redistribute learned vlan 1000,1001 ok: [s1] => msg: |- evpn configuration for s1 ========================================= ! router bgp 65000 ! address-family l2vpn evpn neighbor 10.0.0.6 activate neighbor 10.0.0.6 send-community extended ! evpn arp-suppression redistribute local-mac redistribute local-svi ! vlan-aware-bundle tenant rd 65000:1 route-target import 65000:1 route-target export 65000:1 route-target both 65000:1 redistribute host-route vlan 1000,1001 evpn interface vxlan 1 TASK [Deploy evpn configuration] *********************************************** skipping: [h1] skipping: [h2] skipping: [h3] skipping: [h4] included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/arubacx.yml for s1 included: /home/pipi/netlab_gh/netsim/ansible/tasks/deploy-config/eos.yml for s2 TASK [tempfile] **************************************************************** changed: [s1 -> localhost] TASK [template] **************************************************************** changed: [s1 -> localhost] TASK [aoscx_config: deploying evpn from /home/pipi/netlab_gh/netsim/ansible/templates/evpn/arubacx.j2] *** changed: [s1] TASK [file] ******************************************************************** changed: [s1 -> localhost] TASK [eos_config: deploying evpn from /home/pipi/netlab_gh/netsim/ansible/templates/evpn/eos.j2] *** changed: [s2] PLAY [Deploy custom deployment templates] ************************************** skipping: no hosts matched PLAY RECAP ********************************************************************* h1 : ok=41 changed=8 unreachable=0 failed=0 skipped=40 rescued=0 ignored=0 h2 : ok=41 changed=8 unreachable=0 failed=0 skipped=40 rescued=0 ignored=0 h3 : ok=41 changed=8 unreachable=0 failed=0 skipped=40 rescued=0 ignored=0 h4 : ok=41 changed=8 unreachable=0 failed=0 skipped=40 rescued=0 ignored=0 s1 : ok=79 changed=28 unreachable=0 failed=0 skipped=16 rescued=0 ignored=0 s2 : ok=61 changed=8 unreachable=0 failed=0 skipped=14 rescued=0 ignored=0 The device under test is an EVPN PE-device bridging two VLANs over VXLAN using VLAN-aware Bundle service. The other EVPN PE-device is an Arista EOS device. Both VLANs are using the same IP prefix to identify potential inter-VLAN leaking. * h1 and h2 should be able to ping each other * h3 and h4 should be able to ping each other * h1 should not be able to reach h3 or h4 Please note it might take a while for the lab to work due to STP learning phase