Integration Test Results

Test	Lab started	Devices configured	Validated	Test date	Device image
01-interfaces	✅	✅	✅	2025-09-13 14:49:35	cisco/csr1000v:17.03.04
02-loopback	✅	✅	✅	2025-09-05 17:28:26	cisco/csr1000v:17.03.04
03-unnumbered	✅	✅		2025-09-05 17:30:11	cisco/csr1000v:17.03.04
04-mtu	✅	✅	✅	2025-09-05 17:32:48	cisco/csr1000v:17.03.04
05-host	✅	✅	❌ (more)	2025-09-05 17:35:38	cisco/csr1000v:17.03.04
CSR 1000v does not create an IPv6 default route based on incoming RA messages
06-bridge	✅	✅	✅	2025-09-05 17:37:37	cisco/csr1000v:17.03.04
07-router	✅	✅	✅	2025-09-05 17:39:34	cisco/csr1000v:17.03.04
08-ra	✅	✅	✅	2025-09-05 17:41:36	cisco/csr1000v:17.03.04

Notes:

Not supported: netlab does not support the function on the device (or the device cannot implement it)
Lab not started: usually a VM initialization failure or a VM boot timeout
Devices not configured: netlab initial failed, usually due to configuration templates Jinja2 errors or commands that the device refuses to accept
Not validated: netlab validate reported an error.
Click on the ✅ or ❌ marks to see log files or error reports
Hover over the test name to see a short description
Click on the Test Suite link to view a feature-specific overview of test results for all tested devices