Integration Test Results

Test	Supported	Lab started	Devices configured	Validated	Test date	Device image
01-network		✅	✅	✅	2025-05-06 17:21:04	aruba/cx:10.15
02-areas		✅	✅	✅	2025-05-06 17:22:06	aruba/cx:10.15
03-cost		✅	✅	✅	2025-05-06 17:23:06	aruba/cx:10.15
04-passive		✅	✅	✅	2025-05-06 17:24:17	aruba/cx:10.15
05-unnumbered		✅	✅	✅	2025-05-06 17:25:17	aruba/cx:10.15
06-vlan-mtu		✅	✅	✅	2025-05-06 17:26:19	aruba/cx:10.15
10-import		✅	✅	✅	2025-05-06 17:27:26	aruba/cx:10.15
11-import-policy		✅	✅	✅	2025-05-06 17:28:38	aruba/cx:10.15
20-default		✅	✅	✔	2025-05-06 17:29:54	aruba/cx:10.15
Aruba CX cannot specify the OSPF external route type on the default route. All default routes are advertised as E2 routes. Node probe: There is no path to 0.0.0.0/0 in the OSPF topology with cost=30
21-default-policy	❌				2025-05-06 17:30:00
22-default-vrf		✅	✅	✅	2025-05-06 17:31:02	aruba/cx:10.15
30-timers		✅	✅	✅	2025-05-06 17:31:49	aruba/cx:10.15
31-priority		✅	✅	✅	2025-05-06 17:33:20	aruba/cx:10.15
32-password		✅	✅	✅	2025-05-06 17:34:17	aruba/cx:10.15

Notes:

Not supported: netlab does not support the function on the device (or the device cannot implement it)
Lab not started: usually a VM initialization failure or a VM boot timeout
Devices not configured: netlab initial failed, usually due to configuration templates Jinja2 errors or commands that the device refuses to accept
Not validated: netlab validate reported an error.
Click on the ✅ or ❌ marks to see log files or error reports
Hover over the test name to see a short description
Click on the Test Suite link to view a feature-specific overview of test results for all tested devices