Integration Test Results

Device arubacx
Provider libvirt
Test suite ospf/ospfv2
Test Supported Lab
started		 Devices
configured		 Validated Test date Device
image
01-network ✅ ✅ ✅ 2025-12-23 09:50:27 aruba/cx:10.15
02-areas ✅ ✅ ✅ 2025-12-23 09:51:34 aruba/cx:10.15
03-cost ✅ ✅ ✅ 2025-12-23 09:52:41 aruba/cx:10.15
04-passive ✅ ✅ ✅ 2025-12-23 09:53:55 aruba/cx:10.15
05-unnumbered ✅ ✅ ✅ 2025-12-23 09:54:57 aruba/cx:10.15
06-vlan-mtu ✅ ✅ ✅ 2025-12-23 09:56:07 aruba/cx:10.15
10-import ✅ ✅ ✅ 2025-12-23 09:57:16 aruba/cx:10.15
11-import-policy ✅ ✅ ✅ 2025-12-23 09:58:23 aruba/cx:10.15
20-default ✔ ✅ ✅ ✔ 2025-12-23 09:59:57 aruba/cx:10.15
  • Aruba CX cannot specify the OSPF external route type on the default route. All default routes are advertised as E2 routes.
  • arubacx: OSPF default-information originate (used in global routing table on node dut_a) does not support metric-type attribute
  • arubacx: OSPF default-information originate (used in global routing table on node dut_c) does not support metric-type attribute
  • Node probe: There is no path to 0.0.0.0/0 in the OSPF topology with cost=30
21-default-policy ❌ 2025-12-23 10:00:01
22-default-vrf ✅ ✅ ✅ 2025-12-28 12:54:50 aruba/cx:10.15
30-timers ✅ ✅ ✅ 2025-12-23 10:02:54 aruba/cx:10.15
31-priority ✅ ✅ ✅ 2025-12-23 10:04:36 aruba/cx:10.15
32-password ✅ ✅ ✅ 2025-12-23 10:05:39 aruba/cx:10.15
40-area-parameters ✅ ✅ ✔ 2025-12-23 10:07:35 aruba/cx:10.15
  • Node r22: The default route inserted in NSSA/stub area has wrong cost
  • Node rb: Inter-area routes do not have the correct cost
  • Node rb: NSSA range is missing or has incorrect cost

Notes: